• Proceedings of the KIEE Conference
• /
• 2001.07e
• /
• pp.134-140
• /
• 2001

Parallel processing has the potential to be cost effectively used on computationally intense power system problems. But this technology is not still available is not only parallel computer but also parallel processing scheme. Testing these algorithms to ensure accuracy, and evaluation of their performance is also an issue. Although a significant amount of parallel algorithms of power system problem have been developed in last decade, actual testing on processor architectures lies in the beginning stages. This paper presents the parallel processing algorithm to supply the base being able to treat power flow by newton's method by the distributed memory type parallel computer. This method is to assign and to compute teared blocks of sparse matrix at each parallel processors. The testing to insure accuracy of developed method have been done on serial computer by trying to simulate a parallel environment.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.51 no.2
• /
• pp.55-59
• /
• 2002

Parallel processing is able to be used effectively on computationally intense power system problems. But this technology is not still available is not only parallel computer but also parallel processing scheme. Testing these algorithms to ensure accuracy, and evaluation of their performance is also an issue. Although a significant amount of parallel algorithms of power system problem have been developed in last decade, actual testing on parallel computer architectures lies in the beginning stages because no clear cut paths. This paper presents Jacobian modeling method to supply the base being able to treat power flow by newton's method by the computer. This method is to assign and to compute teared blocks of sparse matrix at each parallel processors. The testing to insure accuracy of developed method have been done on serial computer by trying to simulate a parallel environment.

• ETRI Journal
• /
• v.31 no.4
• /
• pp.387-392
• /
• 2009

This paper introduces a novel parallel shift operator finite-difference time-domain (SO-FDTD) method for plasma in the dispersive media. We calculate the interaction between the electromagnetic wave of various frequencies and non-magnetized plasma by using the parallel SO-FDTD method. Then, we compare the results，which are calculated with serial and parallel SO-FDTD executions to obtain the speedup ratio and validate the parallel execution. We conclude that the parallel SO method has almost the same precision as the serial SO method, while the parallel approach expands the scope of memory and reduces the CPU time.

• Journal of the Korean Mathematical Society
• /
• v.49 no.4
• /
• pp.805-827
• /
• 2012

In this paper, we first study convergence of a special type of multisplitting methods with preweighting, and then we provide some comparison results of those multisplitting methods. Next, we propose both parallel implementation of an SOR-like multisplitting method with preweighting and an application of the SOR-like multisplitting method with preweighting to a parallel preconditioner of Krylov subspace method. Lastly, we provide parallel performance results of both the SOR-like multisplitting method with preweighting and Krylov subspace method with the parallel preconditioner to evaluate parallel efficiency of the proposed methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6C
• /
• pp.438-443
• /
• 2008

The efficient method to implement the Max-Log-MAP algorithm is proposed by modifying the conventional algorithm. It is called a parallel soft output Viterbi algorithm (SOVA) and the rigorous proof is given for the equivalence between the Max-Log-MAP algorithm and the parallel SOVA. The parallel SOVA is compared with the conventional algorithms and we show that it is an efficient algorithm implementing the modified SOVA in parallel.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.510-517
• /
• 2009

A high throughput parallel decoding method is developed for context-based adaptive variable length codes. In this paper, several new design ideas are devised and implemented for scalable parallel processing, a reduction in area, and a reduction in power requirements. First, simplified logical operations instead of memory lookups are used for parallel processing. Second, the codes are grouped based on their lengths for efficient logical operation. Third, up to M bits of the input stream can be analyzed simultaneously. For comparison, we designed a logical-operation-based parallel decoder for M=8 and a conventional parallel decoder. High-speed parallel decoding becomes possible with our method. In addition, for similar decoding rates (1.57 codes/cycle for M=8), our new approach uses 46% less chip area than the conventional method.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.4
• /
• pp.154-160
• /
• 2003

The switched reluctance motor(SRM) has a considerable potential for industrial applications because of its high reliability as a result of the absence of rotor windings. In some applications with SRM, a parallel switching strategy is often used for cost saving, increasing of current capacity and system reliability. This paper proposes a new parallel switching strategy of SRM using parallel winding. While conventional parallel switching devices are connected in a phase winding, power devices are connected in the parallel windings wound in each pole of stator in the proposed method. Paralleling strategy for current sharing in the proposed method can be easily determined without considerations of any nonlinear characteristics of power devices such as conduction resistance, threshold voltage and gain factor. The proposed paralleling strategy is verified by the mathematical analysis and experimental results.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.4
• /
• pp.154-154
• /
• 2003

The switched reluctance motor(SRM) has a considerable potential for industrial applications because of its high reliability as a result of the absence of rotor windings. In some applications with SRM, a parallel switching strategy is often used for cost saving, increasing of current capacity and system reliability. This paper proposes a new parallel switching strategy of SRM using parallel winding. While conventional parallel switching devices are connected in a phase winding, power devices are connected in the parallel windings wound in each pole of stator in the proposed method. Paralleling strategy for current sharing in the proposed method can be easily determined without considerations of any nonlinear characteristics of power devices such as conduction resistance, threshold voltage and gain factor. The proposed paralleling strategy is verified by the mathematical analysis and experimental results.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.655-658
• /
• 1999

In this paper, Parallel operation of two DC-DC converters which we have ever done before need two CTs to do load current sharing. However, we have proposed a new method called ZCT method that can share load current with only a CT as doing parallel operation two converters with same converter capacity. To confirm parallel performance by a proposed DC-DC converter parallel operation method, we have done computer simulation and experiment. It is certain that we have showed to achieve two converters current sharing performance efficiently through simulation and experiment at result.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.6
• /
• pp.541-549
• /
• 2021

This paper reports a method to evaluate the residual strength of insect-damaged radiata pine lumber, such as the screw withdrawal strength as a semi-destructive method and a compression parallel to the grain test to assess the density changes after exposure to outdoor conditions. The screw withdrawal strength test was used as a semi-destructive method to estimate the residual density of decayed lumber. A compression parallel to the grain test was applied to evaluate the residual density. Three variables, such as the screw withdrawal strength, compression parallel to the grain, and residual density, were analyzed statistically to evaluate their relationships. The relationship between the residual density and screw withdrawal strength showed a good correlation, in which the screw withdrawal strength decreased with decreasing density. The other relationship between the residual density and compression parallel to the grain was also positively correlated; the compression parallel to the grain strength decreased with decreasing density. Finally, the correlation between the three variables was statistically significant, and the mutual correlation coefficients showed a strong correlation between the three variables. Hence, these variables are closely correlated. The test results showed that the screw withdrawal strength could be used as a semi-destructive method for an in situ estimation of an existing wood structure. Moreover, the method might approximate the residual density and compression parallel to the grain if supplemented with additional data.