• Bulletin of the Korean Chemical Society
• /
• 제3권3호
• /
• pp.110-115
• /
• 1982

Thermochemistry and photochemistry of picolyl chlorides were studied. The thermal reaction of 2-picolyl chloride in benzene afforded intermolecular condensation product. In the case of 3-picolyl chloride, this type of the reaction did not occur, but polymers were obtained. A cyclic hexamer, suggested by a molecular model, was not formed because of the steric strain and low reactivity. The thermal reaction of 4-picolyl chloride gave a cyclic hexamer as well as a polymer. The cyclic hexamer, identified by NMR spectrum, showed ${\lambda}_{max}$ at 460 nm. The cyclic hexamer was cloven to the linear structure. Photolysis of 2-picolyl chloride at 253.7 nm gave a para-isomer followed by polymerization. When a methyl hydrogen of 2-methylpyridine is substituted by $CH_3O$, iso-PrO, and EtO group, the photoisomerization to the corresponding anilines or para-substituted pyridines did not occur within the range of the time used for 2-picolyl chloride. Thermolysis of picolyl chlorides in an acidic methanol solution did not afford any product.

• 한국수소및신에너지학회논문집
• /
• 제26권2호
• /
• pp.105-113
• /
• 2015

In order to accelerate hydrogen society in current big renewable energy trend, it is very important that hydrogen can be transported and stored as a fuel in efficient and economical fashion. In this perspective, liquid hydrogen can be considered as one of the most prospective storage methods that can bring early arrival of the hydrogen society by its high gravimetric energy density. In this study, a small-scale hydrogen liquefier has been designed and developed to demonstrate direct hydrogen liquefaction technology. Gifford-McMahon (GM) cryocooler was employed to cool warm hydrogen gas to normal boiling point of hydrogen at 20K. Various cryogenic insulation technologies such as double walled vacuum vessels and multi-layer insulation were used to minimize heat leak from ambient. A liquid nitrogen assisted precooler, two ortho-para hydrogen catalytic converters, and highly efficient heat pipe were adapted to achieve the target liquefaction rate of 1L/hr. The liquefier has successfully demonstrated more than 1L/hr of hydrogen liquefaction. The system also has demonstrated its versatile usage as a very efficient 150L liquid hydrogen storage tank.

• 폴리머
• /
• 제35권6호
• /
• pp.505-512
• /
• 2011

Para-xylene의 기본 구조로 연결된 4개의 이핵 CGC를 활용하여 에틸렌과 1-헥센의 공중합특성을 조사하여 중합촉매의 구조적인 특징이 중합에 미치는 영향을 조사하였다. 4가지의 이핵 constrained geometry catalyst(CGC) 중에서 3가지는 모두 para-xylene 다리로 연결되어 있으나 벤젠고리 부분에 각각 다른 치환체가 결합된 것으로서 치환체는 수소(Catalyst 1), isopropyl(Catalyst 2), n-hexyl(Cataylst 3)이고, n-octyl(Catalyst 4)인 화합물이었다. 이핵 메탈로센 4가지와 Dow 촉매를 사용하여 에틸렌과 1-헥센을 공중합시켜 다른 치환체를 가진 다리리간드의 구조적인 특성변화가 촉매의 중합특성과 이로부터 생성되는 공중합체의 특성에 미치는 영향을 조사하였다. 실험 결과 다리리간드의 특성에 따라 분명한 경향성과 차이점이 발견되었다. 중합활성은 치환체의 크기가 가장 작은 수소에서 가장 높았으며, isopropyl에서 가장 낮았으며 그 차이는 최대 3배 이상이었다. 반면 분자량은 치환체가 isopropyl인 촉매에서 생성된 공중합체가 가장 컸고, n-hexyl과 1-octyl 치환체 화합물에서 가장 작은 분자량의 공중합체가 생성되었으며 그 차이는 6배에 달하였다. 이핵 CGC의 공중합 특성은 치환체가 긴 알킬기인 n-hexyl 및 1-octyl 화합물이 가장 우수하여 동일한 조건에서 1-헥센을 가장 많이 함유하여 40% 이상의 1-헥센을 포함하는 에틸렌 공중합체를 제조할 수 있었다. 이러한 연구 결과는 촉매구조 변화에 의한 고분자 미세구조 조절이라는 고분자 합성의 가장 어려운 부분이 xylene 다리를 가진 이핵 CGC의 치환체를 조절함으로써 가능함을 보여주는 결과이다.

• 대한화학회지
• /
• 제22권4호
• /
• pp.221-228
• /
• 1978

2,4-Dinitrohalo (F,Br) benzene과 파라치환아닐린간의 반응속도를 아세토니트릴-메탄올 혼합용매하에서 측정하였다. 2,4-Dinitrobromobenzene과 치환아닐간의 반응에서 메탄올은 친핵촉매 현상만을 보였으며, 2,4-dinitrofluorobenzene과 치환아닐린간의 반응에서는 메탄올은 양쪽성(친핵 및 친전자) 촉매현상을 보였다. 메탄올에 의한 친핵촉매현상은 아마도 천이상태에서 알코올기의 수소와 이탈기의 플루오르사이의 수소결합에 의해 설명될 수 있으며 친전자촉매현상은 알코올기의 산소와 아닐린의 아민기 수소사이의 수소결합에 기인되는 것임을 알았다.

• 대한화학회지
• /
• 제22권1호
• /
• pp.7-11
• /
• 1978

이니트로요오도벤젠과 파라치환체 아닐린과의 반응을 아세토니트릴-메탄올 혼합용매에서 연구하였다. 행해진 반응에서의 반응속도 상수는 메탄올 용매하에서 아세토니트릴 용매에 비해 큰 값을 보였다. 실험 결과로 부터 중간체 생성 과정이 반응속도 결정 단계임을 알았으며 용매효과는 메탄올의 산소 원자와 아닐린의 수소원자 사이의 수소결합에 의한 천이상태 안정화로 설명하였다.

• Bulletin of the Korean Chemical Society
• /
• 제26권8호
• /
• pp.1170-1176
• /
• 2005

The structures and conformations of ortho-, meta-, and para-methyl red (MR) upon proton gain and loss were studied by density functional calculations, and compared to methyl yellow for the effects of a carboxyl substitution. Internal hydrogen bonding causes the geometry of neutral o-MR planar, otherwise twist. Monoprotonated species of MR are planar where the proton is attached to $\beta$-azo nitrogen. This loses its azo character a bit, and shows strong delocalization characterized as a quinonoid canonical structure. Di-protonated species of MR is proved to hold two protons at the amino and $\alpha$-azo nitrogen atoms, and planar. It regains somewhat of its azo character, but still shows fairly delocalized property in terms of carbocationic canonical structures. The carboxyl substitution on 4-dimethylamino-trans-azobenzene structure has some delocalization effects on the geometry or conformation of MR derivatives whether neutral, mono-, di- or de-protonated.

• 한국응용과학기술학회지
• /
• 제7권1호
• /
• pp.93-105
• /
• 1990

Semicarbazone formation of nine monosubstituted benzaldehydes was studied kinetically in 20% methanol buffer solution at 15, 25, 35, and $45^{circ}C$. The rate of p-nitrobenzaldehyde semicarbazone formation is 2.7 times as fast as that of benzaldehyde, while p-hvdroxybenzaldehyde is 3.6 times as slow as that of benzaldehyde. Activation energies for p-chlorobenzaldehyde, benzaldehyde, p-methylbenzaldehyde, p-methoxybenzaldshyde, p-hydroxybenzaldehyde, and p-dimethylaminobenzaldehyde semicarbazone formation are calculated as 5.80, 6.19, 6.57, 7.06, 8.03, and 6.46 kcal/mol respectively. It is concluded from the effect of ionic strength that the reaction is affected by not ions but neutral molecules involving hydrogen bonding between oxygen atom of carbonyl group and hydrogen atom of acid-catalyst, and concerted attack of the necleophilic reagent, free base on carbonyl compound. Also, the effect of solvent composition is small in 20% and 50% methanol (and ethanol) aqueous solutions. The ${\rho}-{\sigma}$ plots for the rates of semicarbazone formation at pH 7.1 show a linear ${\rho}-{\sigma}$ relationship (${\rho}=0.14l$, in contrast to that at pH 2.75 and pH 5.4 corresponding to ${\rho}-{\sigma}$ correlations reparted by Jencks. The rate of semicarbazone formation at pH 5.4 show a relationship which is convex upward, resulting in a break in the curve but at pH 2.75, slight difference from a linear relationship. As a result of studying citric acid catalysis, second-order rate constants increase linearly with citric acid concentration and show a 2 times increase as the catalyst concentration is varied from 0.025 to 0.1 mol/1 at pH 2,9, but slight increase at pH 5.3. The rate-determining step is addition below pH 5 but is dehydration between pH 5 and 7. Conclusively, the rate-determining step of the reaction changes from dehydration to addition in respect to hydrogen ion activity near pH 5. The ortho: para rate ratio of the hydroxybenzaldehydes for semicarbazone formation is about 17 at $15^{\circ}C$. It is concluded that the results constitute strong evidence in favor of greater stabilization of p- than o-hydroxybenzaldehyde by substituent which donate electrons by resonance and is due to hydrogen bonding between the carbon-bound hydrogen of the-CHO group and the oxygen atom of the substituent.

• 공업화학
• /
• 제5권5호
• /
• pp.871-877
• /
• 1994

부타디엔의 고분자반응 또는 운반 및 보관과정에서 이량화되어 생성되는 4-비닐시클로헥센(VCH)을 이용하여 방향족 니트로화합물을 Pd/C 촉매하에서 촉매 전달 수소화반응시켜 높은 수율의 아닐린유도체로 합성하였다. 니트로벤젠고리에 치환기가 치환된 오르토-니트로톨루엔, 오르토-니트로페놀, 오르토-니트로아니졸의 경우는 파라-니트로톨루엔, 파라-니트로페놀, 파라-니트로아니졸의 반응보다 반응 소요시간이 길었다. 4-비닐시클로헥센-에탄올-Pd/C계에서 오르토, 메타, 파라-클로로니트로벤젠, 파라-니트로벤즈알데히드, 파라-니트로벤질알코올, 파라-니트로벤질 아세테이트 등의 화합물에서는 환원반응뿐만 아니라 가수소 분해반응도 진행되어 파라-톨루이딘이 생성되었다.

• 한국염색가공학회지
• /
• 제8권1호
• /
• pp.56-63
• /
• 1996

A number of thermotropic liquid crystalline polyurethanes with mesogenic unit were synthesized by polyaddition of a para-type diisocyanate such as 1, 4-phenylene diisocyanate(1,4-PDI) with 4, 4'-bis($\omega$-hydorxyalkoxy) biphenyls($BP{m}$) in DMF. The thermal and liquid crystab line properties were examined by differential scanning calorimetry(DSC), polarized optical microscopy, and wide-angle X-ray scattering(WAXS). Intrinsic viscosities of the polymers exbibited two endothermic peaks correspondinding to phase transitions of melting and isotropization. For example, polyurethane(1,4-PDI/($BP{11}$) ) was found to display a liquid crystalline phase between 177 to 205$^{\circ}C$. In order to know how the hydrogen bonding interaction affects the formation of mesophases in polyurethane 1, 4-PDI/($BP{8}$) / thermal processing FT-IR measurements were carried out. It was found that the stretches regarded as shift to higher frequency region with increasing temperature which showed grdually their liquid crystalline phase

• 한국염색가공학회지
• /
• 제7권4호
• /
• pp.8-15
• /
• 1995

A series of thermotropic Polyurethanes mesogenic unit were synthesized by polyaddition of a para-type diisocyanate such as 2,5-tolylene diisocyanate(2,5-TDI) with 4-4'-bis($\omega$-hydroxyalkoxy) biphenls(BPm: $HOCmH_{2m}OC_{6}H_{4}OC_{m}H_{2m}OH$ : m is the carbon number of the hydroxyalkoxy group) in DMF. Intrinsic viscosities of the polymers were in the range of 0.41~0.99dL/g DSC thermograms for these polymers exhibited two endothermic peaks corresponding to phase transitions of melting and isotropization. For examplem polyurethane 2,5-TDI/BPll with [η]=0.99 prepared from 2.5-TDI and 4,4'-bis[11-hydroxyundecaoxy biphenyl(BP11) a liquid crystalline phase from 156 to 173$^{\circ}C$. The thermotropic properites of liquid crystalline polyurethanes have been investigated by wide-angle X-ray scatter(WAXS), infrared (IR) spectroscopy, and differential scanning calorimetry (DSC). The mesomorphic behavior of the polyurethanes was concluded to be greatly dependent on the intermolecular hydrogen bonds through the urethane.