• 한국식품영양과학회지
• /
• 제29권1호
• /
• pp.76-79
• /
• 2000

The effects of packaging conditions on freshness extension of squash (Cucurbita moscata) were investigated during 7-day storage at 2$0^{\circ}C$. Weight loss of squash packed with corrugated paperboard box (control) was 5.5%, and those of LDPE (low density polyethylene, Ф0.02 mm), LDPE (Ф0.04mm) film and EPS (expanded polystyrene) box were 0.9%, 0.8%, and 1.1%, respectively. Firmness of EPS was 11% higher than that of control, chlorophill content of squash packed with EPS box was 18.9% higher, and total ascorbic acid content of squash packed with EPS box was 29.4% higher than that of control. Quality of packed squash was not different between EPS packages and LDPE packages. Decay of control was 1~2 pieces per box, but was not found in the LDPE, EPS box. Preferences in overall appearences of LDPE, EPS box was better than those of control.

• 펄프종이기술
• /
• 제44권2호
• /
• pp.29-34
• /
• 2012

For the purpose of developing liner board for water-resistant corrugated board in the cold chain system, several types of base paper for corrugated board were purchased from the market and 6 different boards were produced in the paperboard mill by applying the chemicals on the base paper. Then, water-moisture resistant performance and physical properties of the boards were compared each other. The liner board which is dried at high temperature with pressure by Condebelt papermaking system(CK paper) showed a superior performance in strength over common liner boards. Strength of the board increased by surface chemical treatment up to 60% of compressive strength and 30% of bursting strength. Starch insolubilization with Ammonium-Zirconium Carbonate(AZC) and surface coating with a surface size and a moisture resistant chemical on CK paper showed the best result. Therefore, this method was recommended to produce the outer liner board for water -resistant corrugated board.

• 한국포장학회지
• /
• 제4권2호
• /
• pp.18-23
• /
• 1998

개발한 EPS 포장상자가 오이의 신선도 유지효과 기능이 있는지의 여부를 분석코자 오이를 골판지상자와 0.02와 0.04mm 두께의 LDPE필름으로 포장 $20^{\circ}C$에 저장하면서 신선도 유지효과를 비교하였다. 저장 7일후 중량감소는 대조구는 4.9%, EPS 상자는 0.8%의 중량감소가 나타났고, 경도는 대조구 보다 필름구와 EPS 포장구에서 높았으며 비타민C도 EPS 포장구가 대조구 보다 15% 높게 유지되고 있었고 클로로필 함량은 EPS 포장구가 대조구 보다 21% 높게 유지되고 있었다. 부패는 포장구간에 나타나지 않았으며 대조구에서 표면이 노랗게 변하였으나 필름구와 EPS에서는 변하지 않았다 EPS 포장상자는 신선도 유지효과가 기존의 골판지상자 보다 더 우수하였다.

• 한국포장학회지
• /
• 제25권3호
• /
• pp.131-137
• /
• 2019

Carton clamps, one of forklift attachments, allow users to quickly handle shipping units such as unitized loads, large shipping cases, or crates without the requirement of pallets. As the use of palletless handling by clamp trucks increases, so does the need for simulation research on clamp truck handling. The frictional characteristics for various contact conditions of corrugated paperboards and their constituent boards were analyzed to obtain the data needed in the computer simulation for the handling of carton clamp truck. The overall mean of static-frictional coefficients between selected corrugated paperboards was 0.38 (±0.01), which was 1.3~1.6 times greater than 0.23~0.29 of the frictional coefficients between boards. The overall mean of static-frictional coefficients between the corrugated paperboards and the rubber contact pad was 0.82 (±0.02), which was about 1.1 to 2.8 times greater than 0.29~0.78 of the static-frictional coefficient between the linerboard and the rubber contact pad. The overall mean of kinetic-frictional coefficients between the corrugated paperboards was 0.35 (±0.01), and 0.76 (±0.02) between the corrugated paperboards and the rubber contact pad.

• 한국포장학회지
• /
• 제7권1호
• /
• pp.9-15
• /
• 2001

Top-to-bottom compression strength of corrugated fiberboard boxes is partly dependent on the load-carrying ability of the central panel areas. The ability of these central areas to resist bending under load will increase the stacking strength of the box. The difference of box compression strengths, among boxes which are made with identical dimensions and fabricated with same components but different flute sizes, is primarily due to difference of the flexural stiffness of the box panels. Top-to-bottom compression strength of a box is accurately predicted by flexural stiffness measurements and the edge crush test of the combined boards. This study was carried out to analyze the flexural stiffness, maximum bending force and maximum deflection for various corrugated fiberboards by experimental investigation. There were significant differences between the machine direction (MD) and the cross-machine direction (CD) of corrugated fiberboards tested. It was about 50% in SW and DW, and $62%{\sim}74%$ in dual-medium corrugated fiberboards(e.g. DM, DMA and DMB), respectively. There were no significant differences of maximum deflection in machine direction among the tested fiberboards but, in cross direction, DM showed the highest value and followed by SW, DMA, DMB and DW in order. For the corrugated fiberboards tested, flexural stiffness in machine direction is about $29%{\sim}48%$ larger than cross direction, and difference of flexural stiffness between the two direction is the lowest in DMA and DMB.

• 한국식품영양과학회지
• /
• 제29권2호
• /
• pp.248-251
• /
• 2000

To investigate the effects of packaging films (functional MA films/FC30, FC50, MA film/0.03 mm LDPE, corrugated paperboard box/control) weight loss, firmness, total ascorbic acid, chlorophill and overall appearence were evaluated. Weight loss of cucumbers packed with FC30 and FC50 at 2$0^{\circ}C$ after 7 days were 1.0 and 0.6%, that of the control was 2.9%, those of LDPE was 0.5%. The firmness of FC30 and FC50 at 2 $0^{\circ}C$ after 7 days were 1.0 and 0.6%, that of the control was 2.9%, those of LDPE was 0.5%. The firmness of FC30-, FC50 and LD was higher than that of the control. Total ascorbic acid contents (TAA) of cucumbers packed with control, LD, FC30 and FC50 box were 9.96, 10.86, 11.37 and 11.29 mg% after 7 days. TAA of FC box was 10% higher than that of the control. Chlorophill content of FC boxes wase 16% higher than of the control. Overall appearence of cucumber packed with FC boxes was better than that of the control.

• 펄프종이기술
• /
• 제41권2호
• /
• pp.55-63
• /
• 2009

This study was performed to evaluate the heavy metal contents in various packaging board. Domestic and foreign OCC (old corrugated containers) and old duplex boards were used as raw materials. Tests were made for the printed and unprinted parts of the sample. Heavy metal contents of old food packaging boards made from virgin pulp fibers were also evaluated. The contents of heavy metals including lead (Pb), cadmium (Cd), barium (Ba), arsenic (As), antimony (Sb), selenium (Se), and mercury (Hg) were determined using ICP-AES (Inductively Coupled Plasma - Atomic Emission Spectrometer), and CV-AAS (Cold vapor-atomic absorption spectrometer) after digesting the samples in a microwave oven. The contents of heavy metals contained in domestic packaging board were higher than those in overseas samples, and OCC showed higher contents of heavy metals than old duplex boards. Printed parts gave greater heavy metal contents than unprinted parts. Results indicate that recycling of paper and paperboard products increases the heavy metal contamination of the paper packaging products and this derives mostly from the heavy metals contained in printing inks. Recycling processes that decrease heavy metals in recycled fibers and new printing inks that contains less heavy metals should be developed to solve the problem associated with the heavy metals in packaging paper products.

• 한국식품저장유통학회지
• /
• 제6권4호
• /
• pp.402-405
• /
• 1999

국내 절화류의 포장 및 유통실태를 조사하고자 부산, 광주, 제주, 충남 및 경기지역을 1997년 10월부터 1998년 2월까지 산지 및 시장을 직접 방문하여 조사하였다. 절화류의 외포장재로는 이중양면 골판지가 주종을 이루고 있었으며 품목별 상자보다는 범용성 상자가 더 많이 사용되고 있었다. 내부포장재로는 재활용 신문지와 폴리에칠렌 필름이 주로 사용되고 있었다. 유통실태는 절화시장에서 도소매가 동시에 이루어지고 있었으며 유통경로는 3가지가 있었는데; 가장 많은 형태가 생산자 $\longrightarrow$ 서울위탁시장을 거쳐 소비자에 이르는 경로로 출하비중은 약 42%에 이른다. 또한, 생산자 $\longrightarrow$ 양재동 화훼공판장 $\longrightarrow$ 도.소매상 $\longrightarrow$ 소비자 경로의 출하비중은 약 18%, 나머지 40%는 생산자 $\longrightarrow$ 산지직.공판장 및 지방위탁시장 $\longrightarrow$ 도ㆍ소매상 $\longrightarrow$ 소비자의 경로였다. 절화류의 유통현대화를 위해서는 규격포장을 사용하여 출하하는 것이 바람직하다고 판단되었다.

• 한국포장학회지
• /
• 제28권1호
• /
• pp.55-66
• /
• 2022

In this study, forty corrugated fiberboard (CF) boxes for fresh produce were collected from farms located in Gyeongsan city and evaluated its characterizations and physical properties according to Korean Standard (KS). The basis weight, flute, and paperboard combination were determined for the characterizations of CF boxes. The measured basis weights of all samples were within the tolerance limit referred to KS and the flutes were B/F, EB/F, and AB/F flute, respectively. The bursting strength (BS), edgewise crush resistance (ECR), and compression strength (CS) were tested to evaluate the physical properties. There are four single-walled (SW) CF boxes showed BS and ECR higher than 638 kPa and 3.30 kN/m, respectively. One SW CF boxes showed BS and ECR higher than 785 kPa and 3.43 kN/m, respectively. In case of double-walled (DW) CF boxes, sixteen CF boxes showed BS and ECR higher than 785 kPa, 4.96 kN/m (AB flute), or 4.90 (EB flute), respectively. The other nineteen CF boxes showed BS and ECR higher than 981 kPa, 5.29 kN/m (AB flute), or 5.20 (EB flute), respectively. All the CF boxes except two samples showed the acceptable compression strength in reference to the guideline of KS.

• 한국포장학회지
• /
• 제7권2호
• /
• pp.6-11
• /
• 2001

국내 무의 유통 및 포장실태를 조사하고자 1999년 11월부터 2000년 4월까지 생산지별로 전북, 강원지역의 무에 대해 산지, 소비지를 대상으로 출하처, 출하방법을 조사하였고 품위의 경우는 태백, 경기와 청양 지역을 중심으로 개당 무게, 길이, 폭, 높이 및 부피를 조사하였으며 소매단계 포장단위, 포장재를 소비지역의 대형 소비처를 중심으로 조사하였다. 유통 및 거래관행은 산지에 따라서 재배기간 및 출하방법이 달랐다. 출하처나 출하방법도 전북과 강원 지역간에 차이가 심한 것으로 나타났다. 지역별로 품위를 조사한 결과. 태백산 무에서 부피 편차가 다른 지역에 비해 큰 것으로 나타났다. 산지 포장화 실태는 포장농가에서는 강원지역 고랭지 무를 중심으로 이뤄지고 있고 직거래(백화점 등 유통업체 또는 농협 물류센터의 계통출하)시 8kg 골판지 박스나 PE대($3{\sim}4$포기용)를 Wooden-Collar에 적재하고 있으며 생산자 단체를 중심으로 포장화가 시도되고 있다. 경제성 분석결과 산물 출하가 포장 출하에 비해 더 경제적이었다. 포장화율을 높이기 위해서는 박스구입비, 상하차비 등을 지원하는 방안이 적극 검토되어야 한다고 사료되었다.