• Science of Emotion and Sensibility
• /
• v.17 no.1
• /
• pp.93-104
• /
• 2014

This paper investigates the physical properties such as water absorption, drying and hygral expansion of moisture responded transformable fibers and their knitted fabrics including dyeing characteristics according to the different dyeing time and temperature. For this purpose, three kinds of covered filament yarn specimens using HEF and spandex as core and PET, aerocool as a covering filament were prepared. The knitted fabric specimens were made using three kinds yarn specimens and dyed with different dyeing temperature and time. The moisture absorption, drying and hygral expansion of three kinds of knitted fabric specimens were measured and discussed with yarn structure. The wearing performance of these knitted fabric specimens were also measured and discussed with yarn characteristics using FAST system. Finally, the dyeing characteristics such as dye affinity, color difference and color fastness to washing of these knitted fabric specimens were measured and discussed with different dyeing temperature and time for examining dyeing process performance of these moisture responded transformable knitted fabrics.

• The Korean Journal of Ceramics
• /
• v.4 no.3
• /
• pp.193-198
• /
• 1998

This paper presents the effects of an initial braking velocity, a braking pressure, and the number of braking stop on the tribological behaviors for the three different C-C composites using an inertia dynamic-friction tester. The C-C composites were prepared through the processes of several cycles of pitch impregnation/carbonization with different friction surface texture such as continuous 8-harness satin fabric (ADD-1), chopped fiber (ADD-2) and chopped fiber (ADD-3) having higher fiber volume fraction on friction than ADD-2 by about 10%. ADD-1 exhibited a higher fraction coefficient (0.41~0.33) than those of ADD-2 and ADD-3 (0.32~0.26) under the various initial braking velocities and braking pressures. The fraction coefficients decreased with increasing the initial velocity and the braking pressures. Wear rate by the thickness change after every 25 stop indicated that ADD-2 and ADD-3 having 1.7~2.7 $\mu\textrm{m}$/stop/pair were much lower than that of ADD-1 showing 5.0~6.5 $\mu\textrm{m}$/stop/pair. All specimens showed a little bit lower wear rate during the middle stage than the initial and latter stages among 100 braking stops. ADD-1 showed higher friction coefficient and wear rate due to the active pull-out of the fibers, evidenced by thicker were film and wear debrises.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.951-956
• /
• 2011

Inconel alloys are generally used as steam generator tubes in nuclear power plants. These alloys are highnickel chromium alloys that exhibit excellent resistance to aqueous corrosion. In this paper, the effects of elevated temperatures such as an operating temperature of $320^{\circ}C$ on the fretting fatigue behavior of inconel 600 and 690. We observed that the plain and fretting fatigue limits at $320^{\circ}C$ were slightly lower than those at room temperature. The frictional forces varied depending on the number of load cycles. After each test, we studied the fretting fatigue mechanisms via SEM observations. These results can be used for structural integrity evaluations at elevated temperatures and for studying fretting damage in steam generator systems.

• Journal of the Korean Society of Costume
• /
• v.67 no.1
• /
• pp.56-73
• /
• 2017

The purpose of this study is to categorize the lotus patterns of traditional Korean fabrics. This study collected 169 fabrics of Korean lotus flower patterns and then made a list of era, configuration of pattern, type of artifact, findspot and holding institutions. It analyzes the characteristics of 251 kinds of lotus woven on 169 Korean fabrics, 251 kinds of lotus on 169 fabrics divided into Realistic Type, Design Type, and Abstract Type. They consist of 213 kinds of Design Type(84.8%), 21 kinds of Realistic Type(8.4%), and 17 kinds of Abstract Type(6.8%). The largest part of lotus patterns is Design Type. Design Types are subdivided into 14 types. This result contrasted with the conclusion of the research paper about peony patterns in Traditional Korean Textiles. The largest part of peony patterns was Realistic Types. Realistic Types of lotus patterns in Korean textiles are subdivided into 6 types. Korea has more diverse forms and a higher ratio of Realistic Types than China and this can be interpreted to reflect that there is a tendency in Korea to prefer natural patterns. Besides abstract Types are subdivided into 3 types. When the lotus flower patterns of Korea and China are categorized and similar types are compared, there are some unique patterns that appear only in Korea or China. Not only that, similar types display differences in pattern arrangement methods and portrayal among the two countries. If such study results are utilized, they can be grounds for distinguishing the production area of lotus flower textile fabrics when they are newly excavated in the future.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.1
• /
• pp.17-21
• /
• 1988

To the purpose of keeping net mouth of seine with bag open in the seining operation a novel method was devised and tested with model gear that double textile strips were fixed at both side edges of bag net mouth as sheering devices. The angles of attack of inner and outer strips were the 40 in degrees by adjusting rigging. In seining operation current that flowed between the double strips and generated side force on the strips sheered and opened the net mouth automatically. This paper described dynamic characteristics of the sheering strips and its automatic opening function of net mouth.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.4
• /
• pp.587-601
• /
• 1993

In the order to grasp their physical characteristics stemming from activity amount, this paper has divided elderly women into the following group ; those with high activity in the past, those with low activity in the present, those with high activity in the present and those with low activity in the present. The analyses of the body measurements and the pie chart, and the classification of back shapes by taking photographs have led to the following results. 1. The items of depth and girth among the body measurements were significant in the past and the present activity. Those with high activity in the past had smaller sizes in depth and girth than those with low activity. 2. From the pie chart, it was shown that those with high activity in the past had smaller sizes in every index as well as in girth than those with low activity in the past. Both those with low activity in the present and those with medium activity in the present had somewhat large sizes in waist girth, bust girth, hip girth and abdominal girth and in the indices of these items. 3. The classification of back shapes by taking photograpes has shown that those with high activity in the past had the less bent body type-42 percent of Type A and 6.5 percent of Type D. Among those with medium activity in the present, Type A was most outstanding and Type C and Type D were less, This fact shows that those with medium activity in the present keep the most normal body type. This proves that the medium activity of elderly women is desirable for keeping the normal body type.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.69-78
• /
• 2012

This paper surveys the physical properties of the MWNT dispersion solution dispersed with the three types of solvents and of the polyurethane composite film for improvement of mechanical properties and electrical characteristics of PU/MWNT composite film. For this purpose, the MWNT dispersed solution was mixed with three types of solvent such as IPA, MEK and Toluene and then mixed with polyurethane (100part) with variation of loading content (0, 10, 20, 30, 40, 50 part) of MWNT dispersed solution in the ultrasonic wave dispersion apparatus. And eighteen PU/MWNT composite films were prepared as specimens. The various physical properties of these PU/MWNT films were measured and discussed with the loading content of three types of MWNT dispersed solutions. The highest absorbancy among the three types of dispersed solutions was shown in the IPA/MWNT solution. But the absorbancy of PU/MWNT films was not same as the solution. The low electrical surface and volume resistivity of PU/MWNT film were shown at the condition of 20 and 10 parts loading of IPA/MWNT dispersed solution, respectively. The low triboelectricity of PU/MWNT film was shown at the condition of above 30part loading of IPA/MWNT dispersed solution. The breaking strength and strain of PU/MWNT film prepared with IPA/MWNT dispersed solution were decreased with increasing loading content of IPA/MWNT from 10 to 40 parts. The maximum breaking strength and breaking strain according to the dispersion solution were shown on the IPA/MWNT dispersed solution. The uniform dispersion of PU/MWNT film according to the loading content of MWNT solution was shown by surface image analysis on the films dispersed with IPA.

• Journal of Fashion Business
• /
• v.9 no.2
• /
• pp.20-27
• /
• 2005

To find suitable color for an individual is very important in personal image-making. In recent years, the importance and role of personal image is also more emphasized. This study deals with the necessity d personal color system and the proposal of color which looks nice on a person as a result d personal color system. It also includes the method of making personal image by balancing between and using both favorite color and unfavorite color. Besides, I study how does the color image affect the personal appearance image in this paper. From clinical experiments, I concluded as follow. First, Each person has his suitable color. When the color is used, the color, pimples, flows and so on are covered and defects of his face are made up for. Second, By changing the factors of his own original color-group and decision factors - color d skin, hair, eye, etc -, I can change personal color-group. Third, The image of color affects the personal appearance image, when it used in make-up and hair-color. Considering above results, If one uses one's suitable color, one will complement defects done's face and improve merits of one's. Besides, One will be more confident and active by using one's suitable color.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.1-7
• /
• 2014

The traditional application of organic dye provides the coloration effects toward various substrates such as textiles, paper, plastic, leather and so on. However, in recent years, these organic dyes, namely colorants, have a great attention in the high technology or high performance industries of electronics and reprographics. In the subsequent discussion of this manuscript, particular emphasis will be given using various examples and explanations on colorant and color chemistry. These high performance uses present interesting challenges to the colorant chemist to design dyes to satisfy the often demanding criteria required. In this context, the following content describes how those researches are being met in the important colorant application to the academic and industrial areas.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.5
• /
• pp.241-248
• /
• 1999

Recently, many linear motion generators and motors are rapidly finding applications that ranges from short stroke linear motion vibrators, such as dynamic cone type loudspeakers to stirling engine driven linear reciprocating alternators, compressors, textile machines etc. The stroke-length may go up to 2m, and the maximum speed is in the range of 5 to 10m/s with oscillating frequency as high as 15 kHz. Therefore, the linear oscillating actuators(LOAs) may be considered as variable speed drivers of precise controller with stoke-length and reversal periods during the reciprocating motion. In this paper, the design, fabrication, experiments, and extraction of control parameters of a moving coil type LOA for driving of linear reciprocating motion control systems, are treated. The actuator consists of the NdFeB permanent magnets with high specific energy as the stator produced magnetic field, a coil-wrapped nonmagnetic hollow rectangular bobbin structure, and an iron core as a pathway for magnetic flux. Actually, the design is accomplished by using FEM analysis for the basic configuration of a magnetic circuit, and characteristic equations for coil design. In order to apply as the drivers of a linear motion reciprocating control system, the control parameters and circuit parameters, such as input voltage-stoke, exciting frequency-stoke, coil inductance and so on, are extracted from the analysis and experiments on concerning a fabricating LOA.