• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.3
• /
• pp.122-135
• /
• 2002

Although fly ash possesses viable engineering properties, an overwhelming majority of fly ash from coal combustion is still placed in storage or disposal sites. Similarly, sludges generated from various water treatment operations are predominantly subjected to the fate of land disposal. To prepare sludges fur land disposal typically requires time consuming dewatering schemes, which can become extremely difficult to execute depending upon the composition of the sludge and its affinity for water. This study was undertaken to reuse fly ash and sludge as construction materials. This paper includes geotechnical properties of fly ash and fly ash-lime-sludge mixture and results of compaction test, UU-test, falling head test, leaching test and CBR test. The effect on mixing fly ash with sludge and lime and the effect of curing period and the results are obtained from this test.

• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.114-122
• /
• 2001

The purpose of this study was to manufacture sintered lightweight aggregate using paper sludge ash and to evaluate the qualities of the aggregate according to various mix proportions, conditions of pelletization and sintering. The paper sludge ash alone, due to its mineral and chemical compositions could not gain suitable expansion and strength. Hence, it was essential to add mineral additives such as clay, fly ash etc. The optimum muting ratio range determined in this study is as follows , paper sludge ash 30∼50 %, clay 30∼50 %, fay ash 0∼40 %, Paper sludge 0∼10% and hematite 2∼3 %(for manufacturing lightweight aggregate both for non-structural and structural concrete). It was possible to manufacture various lightweight aggregate whose dry specific gravity ranged about from 0.6 to 1.4 by using this optimum mixing ratio. From the test results of the qualities of aggregate, it showed that the 10% granules crushing value test and water absorption percentage ranged about 5∼10 ton and 10∼20%. Thus, it was favorably comparable to those of the imported aggregate. The manufactured lightweight aggregate could be used for structural concrete and non-structural concrete.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.458-465
• /
• 2000

Although Fly ash possess viable engineering properties, an overwhelming majority of the fly ash from coal combustion is still placed in storage or disposal sites. Similarly, sludges generated from various water treatment operations are predominantly subject to the fate of land disposal. To prepare sludges for land disposal typically requires time consuming dewatering schemes, which can become extremely difficult to execute dependent upon the composition of the sludge and its affinity for water. This test was undertaken to reuse of fly ash and sludge with mix. In this paper includes of geotechnical properties of fly ash and fly ash-sludge mixture and results of compaction test, unconfined test, falling head test and CBR test and it was analyzed the effect on mixing fly ash with sludge.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.599-604
• /
• 1999

In recent years, problems of industrial solid wastes appear to be kind of national crises, caused by a sudden increase in their quantities, lack of disposal technique, and public discontent in installing plants for their disposal. This study is designed to investigate that pozzolana-based materials, such as blast furnace slag, fly-ash, paper sludge-ash, which are produced from industries as solid wastes, can be used as construction materials. The variations of concrete strength in function of compositional differences of raw materials including the wastes are studied experimentally. As a result, we find out that the blast furnace slag, the fly-ash, and the paper sludge-ash can be recycled as useful resources for replacement of cements by adjusting their substitution ratio.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.69-75
• /
• 1997

This studies regarding deveolpment of product system on artificial aggregate using of Paper Sludge Ash that waste production at paper-making mill. Expecially this paper discribes development of product system using centrifugal mixer plant. The skills of this product system on artificial aggregate using of Ash can be spread Fly-Ash, powder and fine aggregate (under 5mm) of waste concrete reuse.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.687-690
• /
• 2004

The discharge of sewage sludge ash that is rapidly increasing in Korea. The utilization of sewage sludge ash would contribute to the elimination of an environmental problem and to the development of new high-performance materials. So the paper is focused on an experimental study in order to investigate the utilization of sewage sludge ash as the construction materials. It achieves leaching test, chemical composition and compressive strength test. As a result of tests, the sewage sludge ash has sufficient potential for use of pozzolanic raw material. However. it is judged to be available to construction material if research is continuously gone.

• Computers and Concrete
• /
• v.21 no.2
• /
• pp.157-166
• /
• 2018

This article presents the flexural behaviour of reinforced fly ash (FA)-based geopolymer concrete (GPC) beams with partial replacement of FA for about 10% by weight with paper sludge ash (PSA). The beams were made of M35 grade concrete and cured under three curing conditions for comparison viz., ambient curing, external exposure curing, and oven curing at $60^{\circ}C$. The beams were experimentally tested at the 28th day of casting after curing by conducting two-point loading flexural test. Performance aspects such as load carrying capacity, first crack load, load-deflection and moment-curvature behaviours of both types of beams were experimentally studied and their results were compared under different curing conditions. To verify the response of reinforced GPC beams numerically, an ANSYS 13.0 finite element program was also used. The result shows that there is a good agreement between computer model failure behaviour with the experimental failure behaviour.

• Architectural research
• /
• v.12 no.1
• /
• pp.49-55
• /
• 2010

Stone powder sludge is a by-product of the manufacturing process of crushed sand. Most of it is dumped with soil in landfills, and the disposal of stone powder sludge causes a major environmental problem. This paper investigates the applicability of stone powder sludge in fly ashbased geopolymer. For this, stone powder sludge was used to replace fly ash at a replacement ratio of 50% and 100% by weight. The compressive strength of the samples was measured and scanning electron microscopy/ energy dispersive spectroscopy (SEM/EDS) analysis and X-ray diffraction (XRD) were performed. The test results indicated that the optimum level of the alkali activator ratio ($Na_2SiO_3$/NaOH) for fly ash-based geopolymer using stone powder sludge was 1.5. The strength development is closely related to the NaOH solution concentration. In addition, the compressive strength of the sample cured at $25^{\circ}C$ was significantly improved between 7 days and 28 days, even though the strength of the sample showed the lowest value at 7 days. Microscopy results indicated that a higher proportion of unreacted fly ash spheres remained in the sample with 5M NaOH, and some pores on the surface of the sample were observed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.161-162
• /
• 2017

As the use of cement increases with the development of modern society along with the increase of buildings, environmental pollution intensifies and researches on industrial byproducts are continuing. Research on blast furnace slag and fly ash as industrial byproducts is increasing, and research on industrial byproducts such as polysilicon sludge and paper ash used in this study is increasing. Blast furnace slag, which is one of the industrial byproducts, has been widely studied as a material used with cement. However, in this study, we fabricated lightweight matrix of polysilicon sludge and paper ash replaced based on blast furnace slag, and performed SEM analysis.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.4
• /
• pp.25-34
• /
• 2003

This paper is focused on an experimental study in order to investigate the utilization of sewage sludge ash as the cover and liner materials for the waste disposal landfill or as construction materials. A series of tests were performed to evaluate the basic properties, compaction, compressive strength, consolidation, permeability, and CBR of sewage ash. Specially, clay bricks were made as increasing replacement ratio of sewage ash (such as 5, 10, 15, 20, 25, 30%). And tests were fulfilled for its quality. Bentonite and lime were used as the additives to improve permeability properties of sewage sludge ash. As a result of tests, it was shown that the permeability coefficient decreases as increasing bentonite content and the percentage of bentonite was roughly needed 20% to keep the permeability coefficient below $1{\times}10^{-7}cm/sec$. The results of unconfined compression tests show that sewage ash meets the criteria of the unconfined compression strength for cover material. It was shown that the compressive strength decreases as increasing the replacement ratio of sewage sludge ash and the maximum replacement ratio of sewage sludge ash to satisfy the quality standards of the third degree bricks was about 15%.