• Journal of the Korean housing association
• /
• v.4 no.2
• /
• pp.11-22
• /
• 1993

It is said that primary territories such as homes are ercellent examples of how we useterritories to portray ourselves to others. The homes often display openly the personality and values of its occupants. At the same time, as far as childrens' privacy in the household environment is concerned, the range of privacy options generally increases from adolescence on because there is more freedom from parents' supervision at this age period. Children are subject to perpetual intrusion because they are defined as dependents. As long as they continue in this role, they are viewed as, at best, semi-autenomous. In this paper, the authors carried out amd analized some cases specifically to see thestatistical data reported previously more intensively. The results of the analysis are as following; 1) Kids who have bed-rooms of their own(exclusively) seems to be encouraged to invite their friends in more openly and freely than those who share the same bed-room. 2) Social interaction among members of family seems tn be carried cut more frequently and closely in the extended family than in the conjugal family.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.2
• /
• pp.43-49
• /
• 2000

It is a complex process to analyze power system voltage stability problems with all of the dynamics of a system, because a large power network system sophisticatedly consists of generators, lines, loads and so forth. So we considered the dynamics of loads so as to analyze voltage stability method- by carrying out an analysis of steady state voltage stability and dynamic voltage stability simultaneously. To perform a steady state voltage stability program in advance makes it possible to cut down on laborious calculations so that an analysis of dynamic voltage stability becomes concise. The validity and efficiency of the method presented in this paper were verified by applying the IEEE 14 bus system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.9-15
• /
• 2011

Any relative deformation between the cutting tool and the workpiece at machining point results directly in geometric and dimensional errors. The sources of relative deformations between the cutting tool and the workpiece at the contact point may be due to vibration, thermal deformation and cutting forces. In this paper, geometric error prediction of workpiece in turning has been investigated. To reach this goal, turning experiments are carried out according to selected cutting conditions. The variable cutting conditions are cutting speed, depth of cut and feed rate. The results will be useful as a guidance to select cutting conditions to improve the geometrical accuracy.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.645-648
• /
• 2000

A workflow is a flow of work carried out by multiple people. In order to increase efficiency, it is re-quired to change the current workflow dynamically. Till now, three types of dynamic changes: flush, abort, and synthetic cut-over (SCO) , have been proposed. How- ever, the performance evaluations for dynamic workflow changes have not been undertaken. To do so, measuring the amount of time cost making a single change (called change time) and comparing the methods for obtaining such times become ever important. In this paper, we first define change time and then propose a computation method individually for each change type. Finally, we evaluate the performance of an example net change by computing the change times.

• Wind and Structures
• /
• v.1 no.4
• /
• pp.351-364
• /
• 1998

In wind tunnel experiments, the blockage effect is a very important factor which affects the test results significantly. A number of investigations into this problem, especially on the blockage correction of drag coefficient, have been carried out in the past. However, only a limited number of works have been reported on the wind tunnel blockage effect on wind-induced vibration although it is considered to be fairly important. This paper discusses the aerodynamic characteristics of the square model and square model with corner cut based on a series of the wind tunnel tests with various blockage ratios and angles of attack. From the test results, the aerodynamic behavior of square models with up to 10% blockage ratio are almost the same and square models with up to 10% blockage ratio can be tested as a group which behaves similarly.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.383-386
• /
• 1993

In this paper, we propose a sensory data combination method by a fuzzy number approach for multisensor data fusion. Generally, the weighting of one sensory data with respect to another is derived from measures of the relative reliabilities of the two sensory modules. But the relative weight of two sensory data can be approximately determined through human experiences or insufficient experimental data without difficulty. We represent these relative weight using appropriate fuzzy numbers as well as sensory data itself. Using the relative weight, which is subjective valuation, and a fuzzy-numbered sensor data, the fuzzy weighted average method is used for a representative sensory data. The manipulation and calculation of fuzzy numbers can be carried out using the Zadeh's extension principle which can be approximately implemented by the $\alpha$-cut representation of fuzzy numbers and interval analysis.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.106-106
• /
• 2015

In this study, we investigated electrochemically formed nanotube shape on ternary Ti-25Ta-xHf alloys with Hf contents. Ti-25Ta-xHf (x=0~15 wt.%) alloys were manufactured by vacuum arc-melting furnace. The obtained ingots were homogenized in an argon atmosphere at $1050^{\circ}C$ for 2h and then water quenching. The specimens were cut from ingots to 4 mm thickness and first ground and polished using SiC paper (grades from #100 to #2000). The anodization treatments on Ti-25Nb-xHf alloys were carried out at room temperature for experiments. The formation of nanotubular film was conducted by electrochemical method in mixed electrolytes with 1 M $H_3PO_4$ + 0.8 wt. % NaF at 30 V for 2 h. The morphologies of nanotube depended on the Hf content in Ti-25Ta-xHf ternary system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.1016-1019
• /
• 2005

In the cutting of plate steel, the quality of the cut surfaces is strongly dependent on the cutting condition such as cutting speed, plate thickness, power, kerf width and gas pressure etc. The cutting tests of Steel Automobile Press Hot were carried out using $CO_2$ Laser cutting machine. The kerf width and surface roughness of a section are examined at various cutting conditions. This paper deals with cutting characteristics of Steel Automobile Press Hot(SAPH400) using $CO_2$ Laser Cutting Machine.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1280-1286
• /
• 2001

This paper presents some advanced and supplemental methods to enhance the accuracy in case of calculating geometric divergence attenuation, attenuation by multiple screening structures, ground attenuation at unflat surfaces of sound during propagation outdoors by the methods specified in ISO 9613-2. Moreover, a calculation method for considering short-term wind effect, specified in ASJ Model-1998, is also introduced. To verify the accuracy of adopted methods, we have carried out highway traffic noise prediction and measurement at the twelve locations appearing representative road shapes and structures, such as flat, retained cut, elevated, barrier-constructed roads. From the results, we have confirmed the predicted results show good correspondence with the measured at direct, diffracted and reflected sound fields within 30m from the center of near side lane.

• Journal of the Chungcheong Mathematical Society
• /
• v.34 no.2
• /
• pp.181-188
• /
• 2021

Let X be a nondegenerate reduced closed subscheme in ℙⁿ. Assume that π_q : X → Y = π_q(X) ⊂ ℙ^n-1 is a generic projection from the center q ∈ Sec(X) \ X where Sec(X) = ℙⁿ. Let Z be the singular locus of the projection π_q(X) ⊂ ℙ^n-1. Suppose that I_X has the almost minimal presentation, which is of the form R(-3)^β_2,1 ⊕ R(-4) → R(-2)^β_1,1 → I_X → 0. In this paper, we prove the followings: (a) Z is either a linear space or a quadric hypersurface in a linear subspace; (b) $H^1({\mathcal{I}_X(k)})=H^1({\mathcal{I}_Y(k)})$ for all k ∈ ℤ; (c) reg(Y) ≤ max{reg(X), 4}; (d) Y is cut out by at most quartic hypersurfaces.