• 전기학회논문지P
• /
• 제65권1호
• /
• pp.72-75
• /
• 2016

In this paper, we proposes a internal antenna for wireless DVI dongle device using the folded monopole structure. The proposed antenna uses a basic structure of spiral and monopole. The antenna optimized for parameters length, gap, width, and rectangle of folded monopole antenna using the spiral structure. To confirm the characteristics of the antenna parameters, HFSS from ANSYS Inc. was used for the analysis. We used an FR4 dielectric substrate with a dielectric constant of 4.4. The DVI dongle size of the proposed antenna is $50{\times}40{\times}1.6mm$, and the size of the antenna area is $10{\times}40mm$. There is a value of return loss less then -10dB in 2.4GHz and 5.8GHz, band and the maximum antenna gain is -4.13dBi. The utilization possibility of the wireless DVI Dongle antenna have a folded monopole with spiral shape could be confirmed according to compare and analyze the simulation and measurement data.

• 한국정보통신학회논문지
• /
• 제18권4호
• /
• pp.797-804
• /
• 2014

중파대역의 단축형 모노폴 안테나 설계는 저주파대역에서 실험적으로 도출된 제한된 데이터를 사용하여 안테나 설계를 기본적으로 설계하고 보정하는 방식을 사용하고 있다. 안테나 설계에 사용된 단순한 방법으로 중파대역의 단축형 모노폴 안테나의 정확한 성능 예측이 불가능하고, 다양한 지선식 단축형 모노폴 안테나 구조에 대한 성능 분석과 설계가 어려운 실정이다. 본 논문에서는 DGPS 중파대역 지선식 단축형 모노폴 안테나의 다양한 안테나 구조를 설계하고 성능을 분석할 수 있는 안테나 설계 모델을 정립하고, 지선식 단축형 모노폴 안테나의 설계 파라미터에 대한 안테나 성능과 설계 모델을 분석한다. 설계 모델의 적합성을 위하여 100 kHz 대역의 단축형 모노폴 안테나와 지선식 단축형 모노폴 안테나를 설계하여 기존의 설계 모델들과 성능 결과를 비교 분석한다. 기존 설계 모델과 거의 일치하는 특성 결과로 제안 모델을 활용하여 DGPS 안테나 설계 모델을 분석한다.

• Journal of electromagnetic engineering and science
• /
• 제10권1호
• /
• pp.13-17
• /
• 2010

In this paper, we have described a simple CPW-fed UWB antenna for wireless UWB communication. The proposed antenna consists of two symmetrical strips having two steps and CPW feeding. Two techniques(symmetrical structure, two steps) are used to produce good low-dispersion and impedance matching. The proposed UWB antenna has an omni directional radiation pattern, compact size, low dispersion, and low cost.

• ETRI Journal
• /
• 제23권1호
• /
• pp.33-38
• /
• 2001

A numerical simulation and an experimental implementation of T-shaped microstrip-fed printed slot array antenna are presented in this paper. The proposed antenna with relative permittivity 4.3 and thickness 1.0mm is analyzed by the finite-difference time-domain (FDTD) method. The dependence of design parameters on the bandwidth characteristics is investigated. The measured bandwidth of twin-slot array antenna is from 1.37 GHz to 2.388 GHz, which is approximately 53.9 % for return loss less than or equal to -10 dB. The bandwidth of twin-slot is about 1.06 % larger than that of single-slot antenna. The measured results are in good agreement with the FDTD results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.173-176
• /
• 2000

In This paper, a novel broadband monopole antenna is investigated experimentally. Our broadband monopole antenna yields the largest bandwidth from 1.72 ∼ 2.2 GHz ( 24.2 ％ ) for VSWR<1.2 So, this antenna can be designed to extend enough the coverage of dual band(PCS＋IMT-2000). The measurements and computations are confirmed to operating of the our broadband antenna, whose electrical characteristics have an attractive feature as handset communication applications.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.285-288
• /
• 2005

This paper presents the characteristics of antenna factors for sleeve dipole antennas with a broad bandwidth. The coupled integral equations for the unknown current distributions on each elements are derived and solved by applying Galerkin's method of moments. The flatness of antenna factor is considered. with variation of the length and number of sleeve elements.

• ETRI Journal
• /
• 제30권5호
• /
• pp.723-728
• /
• 2008

In this paper, a simple transmission line model for an edge-coupled patch antenna is presented. The coupled section is modeled with a lump network which represents the mutual admittance between patches and from patch to ground. Theoretical analysis of two edge-coupled patch antenna models are compared by simulation and experiment in antennas designed to operate at the 2 GHz band. The proposed model predicts the return loss of the antenna accurately.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.164-167
• /
• 2000

This paper investigated that resonant frequencies of microstrip patch antenna were tunable when piezoelectric materals were used as the antenna substrates. The resonant frequencies of the air-gap antenna using the piezoelectric substrate were able to be controlled by applied AC voltage. The frequency variation of the antenn was great when PZT were applied voltage of the resonant frequency.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.432-435
• /
• 2007

In this paper, a dual band microstrip patch Antenna is designed for RFID Application. The antenna shows a good performance at the frequencies, 900MHz and 2.45GHz for the radiation characteristics and input impedance matching, as well. The reflection factor is lower than -25dB and a good directivity higher than 5dB is achieved for both frequency.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.145-148
• /
• 1998

In this paper, a microstrip antenna is designed using a rectangular patch. To find characteristics of the antenna, computer simulations of the rectangular single microstrip patch antenna are performed with changing width. And we compared the result of computer simulation with the experimental value. Through the results, we found that the 3-D FDTD method is an effective method for designing microstrip patch antenna. According to simulation the resonant point has been found it in the frequency received from GPS satellite. It is thought that make it match by adjusting the feedpoint.