• Journal of the Society of Disaster Information
• /
• v.15 no.1
• /
• pp.98-108
• /
• 2019

Purpose: The purpose of this study is to test the sprinkler performance to protect the wall and ceiling joints of the sandwich panel warehouse in case of fire. Method: Based on the field surveys, test was setup and combustibles were prepared. The sprinkler discharge tests were performed at the corner of the wall and right under the sprinkler head. Results: It has been found that operation of the K-80 closed sprinkler head prevents the ignition of the sandwich panel and therefore no damage to the joints of sandwich panels. To prevent skipping phenomenon, it is necessary to install the sprinkler head from the corner of the wall and to keep a minimum distance of 2.4m and a maximum distance of 3m. Conclution: A Standard Operation Procedure should be prepared to suppress and rescue of fire brigade for a sandwich panel warehouse protected by perimeter sprinklers preventing a ignition of core materials and control fire.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.12
• /
• pp.99-106
• /
• 2020

Man-made slope is inevitable to make a new road, which may result in environmental problems as well as collapse of slope. To prevent these problems, various methods such as geogrid reinforced retaining wall, precast concrete-panel retaining wall, and so on, have been introduced and developed. Among these methods, this paper presents the evaluation of field application of precast concrete-panel retaining wall attached to in-situ ground (so called top-down) compared to the conventional construction method of precast concrete-panel retaining wall (so called bottom-up) through the field test and numerical analysis. As a result, the safety factor of both methods in final stage is similar, however, top-down method guarantees the slope stability during the construction compared to bottom-up method.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.74-82
• /
• 2017

Fires in buildings built using sandwich panels are difficult to extinguish, and the damage caused by the fire spreading through the inner core material is extensive. Sandwich panels consist of a nonflammable material on both sides of an insulation material. The types of insulation material include organic and inorganic insulation materials, but the former are used in more than 80% of the case. Organic insulation is economically advantageous compared to inorganic insulation, but it is vulnerable to fire. Therefore, the damage caused by sandwich panel fires is higher than that for general fires. In the case of the noxious gas analyzer test, the panel is tested with three round holes having a diameter of 25 mm, in order to determine the risk of the core material, but the cone calorimeter test is carried out using a sandwich panel. In this study, the cone calorimeter test was conducted to examine the fire risk of the composite material when heated on a nonflammable surface, exposed to the core material through a hole, and heated directly the core material. The type of organic insulation employed was flame retardant EPS (Expanded Polystyrene), and the test specimens were tested in three types of sandwich panel, a perforated sandwich panel and single core material. The purpose of this study is to propose a method of measuring the fire risk of the core materials of composite materials using the cone calorimeter test.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.2
• /
• pp.399-408
• /
• 2015

This paper concentrated on the ultimate uniaxial compressive strength of stiffened panel with opening under lateral load and also studied the design-oriented formulae. For this purpose, three series of well executed experiments on longitudinal stiffened panel with rectangular opening subjected to the combined load have been selected as test models. The finite element analysis package, ABAQUS, is used for simulation with considering the large elasticplastic deflection behavior of stiffened panels. The feasibility of the numerical procedure is verified by a good agreement of experimental results and numerical results. More cases studies are executed employing nonlinear finite element method to analyze the influence of design variables on the ultimate strength of stiffened panel with opening under combined pressure. Based on data, two design formulae corresponding to different opening types are fitted, and accuracy of them is illustrated to demonstrate that they could be applied to basic design of practical engineering structure.

• Tribology and Lubricants
• /
• v.13 no.4
• /
• pp.33-39
• /
• 1997

In order to establish a new temperature criterion to prevent the pistons from ring sticking due to deposit formation, bench test and engine test were performed. The effects of oil degradation and temperature on deposit formation was studied by a modified panel coking test. Oil degradation was analyzed by FTIR. Oil oxidation and nitration were selected as a factors to evaluate oil degradation. Bench test results show that oil oxidation is more effective to the deposit formation than oil nitration. And the temperature increase accelerates deposit formation and deposit formation increase rapidly above 26$0^{\circ}C$. Especially, in case of degraded oil, the deposit formation increases so rapidly that ring sticking can occur. The effect of piston temperature on the deposit formation was confirmed by engine test.

• The Korean Journal of Applied Statistics
• /
• v.17 no.3
• /
• pp.547-556
• /
• 2004

This paper consider the testing problem of variance component for the unbalanced two-way error component model with nuisance parameter. We derive the one-sided LM test statistic for testing zero individual(time) effects assuming that the other time-specific(individual) effects are present. Using the Monte Carlo experiments, the computational more demanding LR test slightly underestimates the nominal size and has the low powers relative to LM test statistic.

• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.150-157
• /
• 1980

In an attempt to evaluate the quality of food by sensory testing, the difference testing for commercial milk was conducted by selected members of a sensory panel. The results were summarized as follows: 1. Sensory panel of 40 persons were selected by the general basis of selection of panel members, by sensitivity test for primary taste, and by discriminatory ability test and trained to have normal abilities on the sensory testing for the quality of milk. 2. As a result of sensitivity test for 4 primary tastes by panel members, the solution concentration of salt, sour, bitter and sweet for which average recognition threshold was located were 0.0128 M sodium chloride, 0.0008 M citric acid, 0.0016 M caffeine and 0.0256 M sucrose, respectively. 3. As results of difference test of single stimuli, paired comparison test, duo-trio test and triangle test, a significant difference was recognized at higher level than the 1% among the samples of commercial milk produced by 5 companies.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.373-375
• /
• 2007

Through Flow Technology offers unparalleled advantages for the manufacturing of flat panel displays using inkjet technology, including: outstanding reliability, self-maintenance, selfpriming and simple set up. The Xaar 1001 GS6 is the first product incorporating this technology. The concept and test results will be presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.356-358
• /
• 2004

In this paper we fabricated and succeeded to demonstrate a test panel for AMOLED on 2" glass and PET substrate. The test panel consisted of an array of 64 x 64 pixels in which OLEDs was driven by pentacene TFT. OTFTs were made of the inverted staggered structure and employed polyvinylphenol as the gate insulator and pentacene thin film as the active layer, producing the filed effect mobility of 0.3$cm^2$/V.sec and on/off current ratio of $10^5$. OLEDs were composed of TPD for HTL and Alq3 for EML with 35nm thick each, generating green monochrome light.

• The Journal of the Korean dental association
• /
• v.54 no.11
• /
• pp.840-849
• /
• 2016

The purpose of this study was to examine dental care utilization and expenditures among children aged 0 to 19 years using Korea Health Panel Survey (KHPS) data in 2008 - 2013. Weighted estimates were nationally representative and statistical significances were analysed by $x^2$ test or adjusted Wald test using STATA 13 software. While dental care utilization increased steadily among children from 2008 through 2013, less than one-third the children received dental care in 2013. Compared with 2008, the proportion of restorative care, oral surgery, preventive care decreased and the proportion of orthodontic care, prosthetic care increased. While the proportion of amalgam markedly decreased, the proportion of resin increased. This study highlight socioeconomic disparities in dental utilization and expenditures among children. Especially the findings provide a baseline assessment for examining trends on dental care for children in the future.