• 한국정밀공학회지
• /
• 제30권9호
• /
• pp.915-921
• /
• 2013

Most of large scale solar panel handling robots adopt the timing-belt drive system for its driveline because of the simplicity and the easiness of implementation. The vibration caused by the flexure of the timing belt would increase as the size and the weight of the panel that the robot handles increase and the vibration would deteriorate the precision and/or productivity of the whole robot system. For the development of a proper control system and for the improvement of the design of the robot it is important to estimate the oscillatory response of the robot system including the flexible drive system properly. In this paper a flexible multi-body dynamics model of a large-scale solar-panel-handling robot with the flexible timing-belt drive system is developed using a generic multi-body dynamics analysis program, RecurDyn.

• 국제지역연구
• /
• 제18권3호
• /
• pp.175-201
• /
• 2014

본 논문은 연구개발투자의 지방경제에 대한 효과와 관련한 논문이다. 연구개발투자는 구체적으로 피투자자의 고용증대와 생산성 증대를 통해 지역경제에 기여한다. 투자를 받은 기업과 기관(피투자자)은 증가된 생산성과 매출액, 고용증가로 만족할 수 있다. R&D 차원에서는 중앙정부 R&D 펀드나 기업의 자체투자 등이 해당된다. 혁신은 기업 내에서만 존재하는 것이 아니라 regional innovation도 연구대상이며 연구개발투자가 한 지역에서 중앙정부 펀드건 기업체 자금이건 진행되면 지역 내 연구 인력, 연구기관 등이 작동되고 성과로 지역 내에 특허, 지적 재산권 등이 증가될 것으로 가정할 수 있다. 좀 더 진전된 긍정적인 효과는 지역산업과 내재적인 관계에서 출발한다. 이 연구는 한국의 panel 데이터를 사용하여 연구개발투자의 지방경제에 대한 효과와 관련한 실증분석 사항이다. Lag 종속변수를 가진 Autoregressive 모형을 통해 Dynamic Panel 추정치가 구해졌으며, Da Silva 방법을 사용하여 혼합된 Variance-component moving average error process가 추정되었다. 연구개발투자는 지역의 생산성을 향상시키는 데 매우 중요한 요소이며 효과의 크기는 한국경제 역사에서 기간에 크게 의존한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1994년도 추계학술대회논문집; 한국종합전시장, 18 Nov. 1994
• /
• pp.288-294
• /
• 1994

A study of prediction and qualification techniques for structure borne booming noise is presented in this paper. Result from acoustic normal mode finite element analysis of a 1/2 size vehicle cavity sample model is compared to the that from an experiment. Coupled structural-acoustic analysis is performed on a 1/4 size vehicle cavity sample model surrounded by 2 mm thick normal steel plates. Interior noise levels around passensger's ear position are predicted and reduced by structural modification based on panel participation factor analysis about the sample cavity model. Futhermore, optimization technique in application of anti-vibration pad is studied.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.626-629
• /
• 2003

In order to achieve high-resolution and large-size displays, inspection technology is necessary and important. It is a powerful utility for process and yield improvement for the high valued panel realization. We indicated the challenge of advanced panel manufacturing on inspection ability and throughput. We also investigated the method to judge laser-crystallizing energy by inspection technology. Finally, the total defect number and critical killer defects were classified and discussed in this work.

• Steel and Composite Structures
• /
• 제1권3호
• /
• pp.269-282
• /
• 2001

In this paper the results of an experimental program devoted to the assessment of the cyclic behaviour of full scale, European type, beam-column subassemblages with welded connections are presented. Six tests (five cyclic and one monotonic) have been carried out on three different series of specimens, encompassing a total of eighteen tests. The three specimen series have been designed with the aim of defining the effect of the column size on the connection behaviour, under different applied loading histories. The tests have evidenced the effect of the column size and panel zone design and of the applied loading history on the cyclic behaviour and failure modes of the connections.

• 오토저널
• /
• 제6권4호
• /
• pp.54-61
• /
• 1984

Numerical calculation of the flow field past a passenger car was carried out by using a panel method with a small computer of 5Mbyte memory size. The shape of car body was simplified and reconstructed by 2180 panels on which a constant strength sink (or source) was distributed. The separation of flow from the surface and the wake flow were not considered in the calculation because of the computer memory limitation. All of the results of calculation were presented by using a 3-dimensional computer graphics. In spite of small memory size of computer, generally good agreements were obtained, except the separated region, from the comparison of pressure distribution between numerical analysis and wind tunnel experiment with 1/5 scaled model.

• 조명전기설비학회논문지
• /
• 제28권1호
• /
• pp.36-44
• /
• 2014

The conventional central photo voltaic inverters have several problems. First, shadow problem in each solar panel, and high DC voltage problem from each panel because of concentration to one central inverter. Therefore, module integrated inverter is proposed to solve these problems. The inverter should be small and cost effective. The cost and size in the inverter depend on the inductor. So the switching frequency should be increased to reduce the inductor and total size, but there is a problem in efficiency because of the losses in turn-on and turn-off. In the paper, the critical conduction mode(CRM) switching method is adopted to reduce the switching loss and interleaving method is proposed to increase the efficiency in Flyback converter. Finally, the validity of the proposed scheme is investigated with simulated and experimental results for a prototype system rated at 200W.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.85-86
• /
• 2007

As the manufacturing capacity needs for large size LCD TV shifts very fast into next generation, equipment manufactures face more challenges in development of the systems which can accommodate productivity, reliability and high process quality requirements from the panel makers. AKT committed to continue its contribution to the growth of the LCD market by providing excellent PECVD products. The cost containment and performance improvement are key challenges for large size processing equipment development and this presentation discusses various challenges and AKT's solutions in developing large size PECVD equipment beyond Gen. 8.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.1988-1994
• /
• 2001

The CRT(Cathode-ray Tube) of salvage is a process of separating the panel and funnel to recycle a cathode-ray tube. In this paper, the thermal properties of glass for CRT were studied to improve its recycling ratio. In the salvage process, several patterns of breakage, as called 'comer pull', were easily generated on the sealing surface of panel or funnel glass due to the residual tensile stress, which had correlations with some parameters of the manufacturing process of CRT and the initial material properties of glass. Finite element analyses and experimental approaches on the flit sealing process were carried out to obtain the major characteristic of glass related to the residual stress. From this study, it was identified that the thermal expansion coefficient of glass had much influence on the residual stress of panel glass after frit sealing process. Therefore, the optimal conditions of thermal properties for CRT glass were proposed to achieve an effective salvage process. By using these optimal conditions, the size of comer pull on the panel and funnel glass was reduced to 10% level compared with the original size, and the recycling ratio of CRT was increased in the salvage process.

• 한국멀티미디어학회논문지
• /
• 제10권10호
• /
• pp.1271-1283
• /
• 2007

평판 디스플레이(FPD)의 결함 검출은 패널 영상의 불균일한 휘도 변화로 인해 정확한 결함 검출이 어렵다. 본 논문은 FPD 패널 영상의 휘도변화를 B-스플라인 표면으로 근사화하고, 이로부터 다양한 결함을 검출하는 방법을 제안한다. B-스플라인 표면 근사화시 잡음 및 결함에 해당하는 고주파 부분을 제외하고, 불균일 휘도 변화에 해당하는 배경부분만으로 구성하기 위해, 웨이브릿 변환 후 저주파대역만을 이용한다. 이는 B-스프라인 표면 근사화의 단점인 시간 소모를 획기적으로 줄일 뿐 아니라, 정확성을 향상시키는 결과를 가져온다. 최소의 부대역에서 근사화된 영상은 웨이브릿 합성 과정을 거쳐 원영상의 크기로 재구성되고, 원 영상에서 이를 뺀 차영상이 바로 불균일 휘도의 배경을 보상한 평평한 영상이 된다. 따라서 결과 영상에 단순 문턱치를 이용하여 결함 영역을 쉽게 검출할 수 있으며, 거짓 결함을 제거하기 위해 블랍 해석이 후처리로서 수행된다 또한 인라인 시스템에 적용하기 위해 웨이브릿 변환을 리프팅 기반의 알고리즘으로 구현하여 필름 같은 대용량의 데이터를 고속으로 처리할 수 있게 함으로써, 처리 시간을 크게 감소 시켰다.