• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.1979-1984
• /
• 2014

We have developed an efficient method to generate highly active Pd and PdO nanoparticles (NPs) dispersed on graphene and graphene oxide (GO) by an impregnation method combined with thermal treatments in $H_2$ and $O_2$ gas flows, respectively. The Pd NPs supported on graphene (Pd/G) and the PdO NPs supported on GO (PdO/GO) demonstrated excellent carbon-carbon cross-coupling reactions under a solvent-free, environmentally-friendly condition. The morphological and chemical structures of PdO/GO and Pd/G were fully characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). We found that the remarkable reactivity of the Pd/G and PdO/GO catalysts toward the cross-coupling reaction is attributed to the high degree of dispersion of the Pd and PdO NPs while the oxidative states of Pd and the oxygen functionalities of graphene oxide are not critical for their catalytic performance.

• 공업화학
• /
• 제3권4호
• /
• pp.694-700
• /
• 1992

Palladium 촉매에 의한 CO Insertion Heck reaction을 고분자 중합에 응용하여 가공성이 좋은 고강도 엔지니어링 플라스틱으로 응용 가능한 flexible spacer를 가진 aromatic polyamide와 Polyester를 합성할 수 있었다. 촉매로서 dichlorobis(triphenyl phosphine) palladium(II) $(PdCl_2(PPh_3)_2)$와 Palladium chloride($PdCl_2$)를 사용하였고, 이 중합 시스템은 똑같은 조건에서 polyamide와 polyester를 합성 할 수 있는 장점이 있으므로 그 중합체의 열적성질을 DSC, TGA 등으로 조사하였는데 곁사슬이 있지 않은 aromatic polyamide와 Polyester는 amide와 ester 결합의 차이에도 불구하고 전이온도등이 거의 같았다. Hexyl부터 hexadecyl까지 alkyl 곁사슬을 2,5 위치에 이중으로 가진 phenylene dibromide와 Phenylene diamine으로부터 중합체를 합성하였는데 치환기가 없는 경우에 비하여 전이온도가 감소하였고, alkyl side chain이 hexadecyl인 경우는 뚜렷한 융점을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2771-2775
• /
• 2011

Poly-ethylenedioxypyrrole (PEDOP) coated thiolated multiwall carbon nanotubes palladium nanoparticles (MWCNTs-Pd) modified glassy carbon electrode (GCE) [PEDOP/MWCNTs-Pd/GCE] for the determination of hydroquinone (HQ) and it’s isomer catechol (CA) were synthesized and compared with bare GCE and thiolated multiwall carbon nanotubes (MWCNTs-SH/GCE). The modification could be made by simple processes on a GCE with MWCNTs-Pd covered by PEDOP in a 0.05 M tetrabutylammonium perchlorate (TBAP)/MeCN solution system. A well-defined peak potential evaluation of the oxidation of hydroquinone to quinone at 0.05 V (vs. Ag/AgCl), and electrochemical reduction back to hydroquinone were found by cyclic voltammetry (CV) in phosphate buffered saline (PBS) at pH 7.4. Peak current values increased linearly with increasing hydroquinone contents. The peak separation between the anodic and cathodic peaks at the PEDOP/MWCNTs-Pd/GCE was ${\Delta}Ep$ = 40 mV for HQ and ${\Delta}Ep$ = 70 mV for CA, resulting in a higher electron transfer rate. Moreover, good reproducibility, excellent storage stability, a wide linear range (0.1 ${\mu}M$ - 5 mM for HQ and 0.01 ${\mu}M$ - 6 mM for CA), and low detection limits ($2.9{\times}10^{-8}$ M for HQ and $2.6{\times}10^{-8}$ M for CA; S/N = 3) were determined using differential pulse voltammetry (DPV) and amperometric responses; this makes it a promising candidate as a sensor for determination of HQ and CA.

• 한국환경과학회지
• /
• 제12권2호
• /
• pp.201-205
• /
• 2003

The dechlorination of chlorinated methanes by iron powder and palladium coated iron (Pd/Fe) was studied in batch experiments. Iron powder dechlorinated carbon tetrachloride (CT) with a half-life of 4 days. Three chloromethane was found as major product and less chlorinated daughters. Mass balance found was to be about 93-99%. Pd/Fe showed very enhanced reactivity for CT in comparing with plain iron. The major dechlorination products of CT were also less chlorinated methanes with Pd/Fe. Pd/Fe also degrade the produced less chlorinated compounds. Sequential reactions were occurred on Pd/Fe. As the Pd/Fe content increased, the reaction rate was increased linearly.

• 한국전기전자재료학회논문지
• /
• 제35권5호
• /
• pp.488-493
• /
• 2022

Generally, diamond-like carbon films (a-C:H, DLC) have been shown to have a low coefficient of friction, a high hardness and a low wear rate. Pd-doped C thin film was fabricated using a dual magnetron sputtering with two targets of graphite and palladium. Graphite target RF power was fixed and palladium target RF power was varied. The structural, physical, and surface properties of the deposited thin film were investigated, and the correlation among these properties was examined. The doping ratio of Pd increased as the RF power increased, and the surface roughness of the thin film decreased somewhat as the RF power increased. In addition, the hardness value of the thin film increased, and the adhesive strength was improved. It was confirmed that the value of the contact angle indicating the surface energy increases as the RF power increases. It was concluded that the increase in RF power contributed to the improvement of the physical properties of Pd-doped C thin film.

• 공업화학
• /
• 제25권3호
• /
• pp.249-253
• /
• 2014

다양한 양이온을 가지는 imidazolium hexafluorophosphate를 이용하여 탄소담지 팔라듐 촉매를 제조하여 이를 hexafluoropropylene 수소화 반응에 사용하였다. 팔라듐의 입자형태는 사용된 이온성액체의 양이온에 영향을 받는 것이 관찰되었다. 이온성액체와 팔라듐 입자 사이의 입체적 안정화 영향으로 인하여 양이온 부분의 알킬 길이가 증가할수록 팔라듐입자는 구형에서 원통형으로 변하였다. $500^{\circ}C$에서 소성한 촉매 모두 동일한 결정구조를 형성하였다. 일정한 반응조건에서 양이온에 hexyl기를 가진 이온성액체로 합성한 촉매가 가장우수한 반응성을 보였다.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.424-428
• /
• 2012

Nano Pd spot-coated active carbon powders were synthesized by a hydrothermal-attachment method (HAA) using PVP capped Pd colloid in a high pressure bomb at $250^{\circ}C$, 450 psi, respectively. The PVP capped Pd colloid was synthesized by the precipitation-redispersion method. PVP capped Pd nano particles showed the narrow size distribution and their particle sizes were less than 8nm in diameter. In the case of nano Pd-spot coated active carbon powders, nano-sized Pd particles were adhered in the active carbon powder surface by HAA method. The component of Pd was homogeneously distributed on the active carbon surface.

• Bulletin of the Korean Chemical Society
• /
• 제8권4호
• /
• pp.246-250
• /
• 1987

The reaction of aryl iodides or bromides with olefins in the presence of 1 mol % of $PdCl_2(PPh_3)_2$ and 3 equiv. of $n-Bu_3N\; at\; 100^{\circ}C$ in carbon monoxide atmosphere gave the corresponding aryl vinyl ketones in good yields with small amount of vinylated 1-aryl olefins. But, when the reaction was proceeded under the 10 atm of carbon monoxide, aryl vinyl ${\alpha}$-diketones and aryl vinyl ketones were obtained in moderate to good yields. The reaction was tolerant of a wide variety of functional groups on either the aryl halides or olefin compounds. Reactivity of aryl halide decrease in the order; aryl iodide > aryl bromide ${\gg}$aryl chloride. In general, the reaction proceeded well and gave good yields of aryl vinyl ketones and aryl vinyl ${\alpha}$-diketones when reactants are substituted with electron withdrawing groups.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1195-1198
• /
• 2013

Nickel hexacyanoferrate supported palladium nanoparticles (Pd-NiHCF NPs) were synthesized and studied for oxygen reduction reactions in direct methanol fuel cell. The NiHCF support was readily synthesized by a comixing of $Ni(OCOCH_3)_2$ and equimolar $K_3[Fe(CN)_6]$ solution into DI water under rigorous stirring. After the preparation of NiHCF support, Pd NPs were loaded on NiHCF via L-ascorbic acid reduction method at $80^{\circ}C$. Pd-NiHCF NPs were electrochemically active for oxygen reduction reaction in 0.1 M $HClO_4$ solution. X-ray absorption near edge structure analysis was conducted to measure the white line intensity of Pd-NiHCF to verify the OH adsorption. As a comparison, carbon supported Pd NPs exhibited same white line intensity. This study provides a general synthetic approach to easily load Pd NPs on porous coordination polymers such as NiHCF and can provide further light to load Pd based alloy NPs on NiHCF framework.

• 대한화학회지
• /
• 제46권1호
• /
• pp.57-63
• /
• 2002

CTA(crude terephthalic acid)의 수소화 정제 반응이 고온의 회분식반응기에서 PdRu/CCM(carbon-carbonaceous composite material) 촉매 상에서 수행되었다. 반응 시간에 따른 In(4-CBA; 4-carboxybenzaldehyde)의 의존도가 선형성을 보임에서 수소화 정제는 1차 속도론을 따름을 알 수 있었다. 촉매량에 따른 반응 속도의 선형성에서 조사된 반응 조건은 정제 반응을 잘 대변할 수 있음을 알 수 있었다. 반응 전환율이 증가하면(4-CBA가 감소하면) 고체 및 액체의 p-toluic acid(p-tol)의 농도는 증가하였으나 벤조산(BA)의 농도는 크게 변하지 않았다. 4-CBA 농도가 대략 0.15% 이하일 때에는 PTA의 AT(alkalitransmittance)는 4-CBA농도에 반비례하며 이는 4-CBA의 수소화에 따라 발색물질도 제거 됨을 보여 준다. 4-CBA농도가 약 0.2% 이상이면 AT는 일정하였는데 이는 4-CBA 자체는 발색 효과를 가지지 않음을 보여준다. (0.3%Pd-0.2%Ru)/CCM 촉매는 0.5%Pd/C 상업 촉매에 비해 초기 활성은 낮으나, 상업 공장 반응기에서 사용한 후에는 오히려 큰 잔존 활성을 보였고 PdRu/CCM 촉매는 루테늄 함량이 약 $0.2{\sim}0.35%$ 일 때 활성의 상승효과를 보였다. PdRu/CCM 촉매는 0.5%Pd/C 상업 촉매를 대체할 가능성이 높음을 알 수 있다.