• 비파괴검사학회지
• /
• 제24권1호
• /
• pp.1-7
• /
• 2004

[ $1.71{\mu}m$ ] 범위의 표면 거칠기를 가진 철 시편에 대해 물속에서 후방산란된 초음파의 입사각 의존성(프로파일)이 측정되었다. 거칠기가 도색에 의해 숨겨졌을 때 수직 프로파일은 거칠기에 대한 분별력이 사라졌으나 레일리 각 근처에서의 후방산란 프로파일은 거칠기 의존성을 여전히 보여주었다. 레일리 각에서 직접 복사된 프로파일 세기는 거칠기와 비례하였고 코너에서 반사되어 되돌아오는 표면파로부터의 후방복사의 세기는 거칠기와 반비례하였다. 도색 처리된 시편에서 0.03 파장 이하의 직접 후방복사에서도 선형성이 관찰되었고 주기적 거칠기에 의해 발생한 비정상 저면 다중반사 현상이 사라졌다.

• KSTLE International Journal
• /
• 제2권2호
• /
• pp.133-137
• /
• 2001

This paper investigates the correlation between strip surface roughness and the surface of the work roll. As the actual temper mill(TM) is used, this data will be adopted to another actual temper mill for the application and operation of this experiment. Conclusions are as follows: Electro-discharge texturing(EDT) roll has homogeneous roughness distribution and shape, and also a sinuous peak surface and the life is 2 times longer than that of shot blast texturing(SBT) method. And the higher surface roughness of work roll, the more time is necessary at the EDT method. In the SBT method without the correlation of roughness, but impeller rotation speed with an uncontrollable peak count. The roughness of SBT roll is irregularity compared to that of EDT roll because the work roll roughness is transferred to the strip which was temper rolled, and produces a more desirable image and greater clarity to the color painted steel sheet.

• Corrosion Science and Technology
• /
• 제9권1호
• /
• pp.29-33
• /
• 2010

Laser machining technique, which is used focusing pulse YAG laser beam irradiation was applied to form area ratio controlled model cut-edge on pre painted Zn coated steels. A corrosion behavior of formed model cut-edge was investigated by rest potential measurement in 1 mol $m^{-3}$ NaCl with and without 0.5 kmol $m^{-3}$ $H_3BO_4$/0.05kmol$m^{-3}$ $Na_2B_4O_7$. The rest potential showed almost constant value with fluctuations. The amplitude of fluctuations increased with exposed area of steel surface. White corrosion products of zinc oxide and simonkollite was formed after the experiments at the formed model cut-edge.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권6호
• /
• pp.135-146
• /
• 2011

강구조물은 주로 도장에 의해 방식처리 되고 있지만, 장기간 사용함에 따라 강재표면에 부식손상이 발생하게 된다. 이러한 부식손상은 단면감소와 이로 인한 좌굴내하력을 저하시킬 우려가 있다. 현재 다양한 등단면형상과 지지조건에 대한 좌굴강도 추정식 및 설계식이 제안되어 있으나, 부식손상으로 인한 불규칙한 변단면 강부재의 축압축 좌굴강도 평가법은 아직 확립되어 있지 않다. 본 연구에서는 부식 손상된 가시설 강부재에서 절취한 강재시편의 축압축 좌굴실험을 실시하여, 부식강재의 좌굴강도 평가에 대한 기초적 연구를 수행하였다. 본 실험에서는 먼저 가시설 주형보의 웨브로부터 시편 지지길이를 200, 300, 400, 500, 600mm로 달리한 5종류 시편을 각각 2개씩 총 10개의 강재시편을 절취하고, 화학적 방법에 의해 녹을 제거하였다. 그리고 3차원 광학 스캐너를 이용하여 $1{\times}1mm$ 간격으로 표면형상을 측정하여, 각 시편의 잔존두께를 산출하였다. 그리고 10개의 부식 손상된 시편과 부식 손상되지 않은 무부식 시편 12개를 양단 완전고정지지 조건하에서 축압축 좌굴실험을 실시하여, 부식두께감소량 및 시편의 표면형상과 축압축 좌굴강도와의 상관관계를 분석하였다. 그 결과, 부식 손상정도에 상관없는 무부식 등단면 강재와 동일하게 좌굴강도를 평가할 수 있는 불규칙 변단면 부식강재의 폭방향평균 최소두께 또는 평균잔존두께와 표준편차의 차로 계산되는 유효두께를 적용하여 축압축 좌굴강도을 추정할 수 있음을 제안하였다. 또한 이러한 결과를 실무에도 적용할 수 있도록 실용적인 부식강재의 잔존두께 측정간격도 제시하였다.

• 한국강구조학회 논문집
• /
• 제16권6호통권73호
• /
• pp.737-745
• /
• 2004

최근 구조물의 정확한 해석을 위하여 접합부의 강성에 반강접 개념이 도입되고 있다. 우리나라의 경우 반강접 접합부의 실험과 이론해석에 대한 연구가 산발적으로 진행되고 있으며, 체계적인 강구조설계를 진행할 정도의 연구성과를 내지는 못 한 상태이다. 그래서 스플릿-티(Split-Tee)를 이용한 접합부의 설계는 국내의 강종과 하중특성을 고려되지 못한 선진국의 연구자료에 의존하고 있는 실정이다. 본 논문은 F10T 고력볼트를 사용한 스플릿-티 접합부의 반강접 특성을 파악하고자, 기둥-보 접합부에 대한 반강접 연구 이전 단계로서 스플릿-티 인장접합부의 구조성능과 변형특성에 대해 실험을 통하여 규명하고자 한다. 플랜지 두께, 도장, 초기도입축력 및 하중가력패턴을 실험변수로 하였으며, 총 20개의 실험체를 제작하여 300ton UTM으로 인장실험을 수행하였다. 각 변수에 따른 스플릿-티 인장 접합부의 구조성능과 거동을 평가하였다.

• Structural Engineering and Mechanics
• /
• 제32권4호
• /
• pp.477-488
• /
• 2009

A slip critical joint has various values to adopt the proper slip coefficient in various conditions of faying surfaces in the following codes: AISC, AIJ and Eurocode 3. However, the Korean Building Code still regulates the unique slip coefficient, 0.45, regardless of the diverse faying conditions. In this study, the slip resistance test, including five kinds of surface treatments were conducted to obtain the proper slip coefficients available to steel plate KS SM490A. The faying surfaces were comprised of a clean mill, rust, red lead paint, zinc primer, and shot blast treatment. The candidates for high strength bolts were torque-shear bolts, torque-shear bolts with zinc coating, and ASTM A490 bolts. Based on the test results, the specimens with a shot blasted surface and rusted surface exhibited $k_s$, 0.61, and 0.5, respectively. It is recommended that the specimens with zinc primer exhibit $k_s{\geq}0.40$. The clean mill treated surface had prominently lower values, 0.27. For red lead painted treatment, the thickness of the coating affects the determinant of slip coefficient, so it is necessary to establish a minimum $k_s$ of 0.2, with a coating thickness of 65 ${\mu}m$. During 1,000 hours of relaxation, the uncoated surfaces exhibited the loss of clamping force behind 3%, while the coated surfaces within a certain limited thickness exhibited the loss of clamping within a range of 4.71% and 8.37%.

• 한국실내디자인학회논문집
• /
• 제13권5호
• /
• pp.21-31
• /
• 2004

There are probably no architects of the 20th Century who had more influence on modern architecture than Mies van der Rohe and Le Corbusier. Although the two architects share one thing in common, namely, both are master of modernism, each has developed unique architecture of his own. The objective of this study is to investigate the characteristics of their works through a comparison analysis of the Ideas, design principles and architectural language reflected in the works, focusing on the houses. this study will also aim to provide a foundation for a new design that harmonizes the design principles and architectural language of the two. Through the study the following common points and differences were found between the houses of the two. A) Common points: Both architects avoided ornamentation In houses while placing weight on the functions of houses and they tried to plan rational floor plans by separating the wall from the structure. B) Differences: \circled1 The houses of Mies express the structure in a straight forward manner, while those of Corbusier are formative houses focusing more on shapes. \circled2 The shapes of the houses of Mies are limited to basic shapes, quadrangle while those of Corbusier employ various geometric curves. \circled3 Using steel and glass, the houses of Mies are light and transparent. On the contrary, using concrete, the houses of Corbusier are somewhat bulky with Three-dimensional changes. \circled4 The houses of Mies show the value of moderation based upon the classical principles of design, while the houses of Corbusier show the value of moderation based upon geometry. \circled5 The houses of Mies feature horizontal intoners with flexibility. However, Corbusier's houses have vertical interiors with some changes in the cross sections. \circled6 In terms of material, the interiors of Mies' houses employ materials with various tones and textures, while interiors of Corbusier's houses are painted in simple white. Summing up these characteristics, it could be said that the houses of Mies have logical and rational beauty, whereas the houses of Corbusier have more emotional beauty.

• Corrosion Science and Technology
• /
• 제11권2호
• /
• pp.48-55
• /
• 2012

Clamping force of a high strength bolt is reduced by a certain period of time after the initial set-up. In case of special treatments on faying surfaces such as protective coating, clamping force is relaxed more severely. Tests for slip critical joints subject to various faying surface parameters were conducted. Five different surface treatments were tested including mill scale surface, blast surface, rust surface and coated surfaces. Each specimen was composed of F10T M20 of high strength bolts and steel plates. Based on the result of slip coefficient test, blast treatment surface showed 0.59, rust treatment surface showed 0.54 and inorganic zinc treatment surface exhibited 0.44. Clean mill treatment surface and red lead paint treatment surface were 0.23, 0.21 respectively. It is identified that the slip coefficient in Korean structural design guide should be determined for various surface conditions. Subsequently from long term relaxation test of ASTM A 490 high strength bolts, relaxation of no-coated surfaces such as blast, clean mill, rust treatment, the loss of initial clamping load was 10.5%, 13.6% and 7.9% for 1,000 hours, while the loss of initial clamping force was reached as 15.0%, 18.7% more than the required redundancy 10% in case of inorganic zinc and red lead painted treatment. It is required that the limit of relaxation on coated faying surface should be established separately for various surfaces.

• 한국해양공학회지
• /
• 제23권4호
• /
• pp.64-68
• /
• 2009

It has been observed that coated steel structures deteriorate more rapidly than the designed lifetime due to acid rain caused by air pollution, etc. Therefore, improving the corrosion resistance of anti-corrosive paint is very important in terms of safety and the economic point of view. In this study, the corrosion resistance of five kinds of anti-corrosive paints, including the Acryl, Fluorine, and Epoxy resin series, were investigated with electrochemical methods, such as corrosion potential measurements, polarization curves, diffusion limiting current density, etc. As a result, the corrosion resistance of the F101 specimen with the fluorine resin series was found to be superior to the other specimens, while E100 with the epoxy resin series also showed a somewhat good corrosion resistance. Furthermore, it was observed that the amount of water and oxygen entering the inner side of a painted film increased with an increase in immersion time, irrespective of the kind of resin series. However, the oxygen diffusion limiting current density of a specimen with good corrosion resistance was relatively decreased compared to other specimens, because of the difficulty of oxygen diffusion penetrating to the inner side of the film. Consequently it is suggested that we can qualitatively evaluate the corrosion resistance of an anti-corrosive paint by measuring the diffusion limiting current density as an electrochemical method.

• 농업과학연구
• /
• 제9권1호
• /
• pp.357-370
• /
• 1982

태양열(太陽熱)을 이용(利用)한 곡물(穀物)의 건조(乾燥)와 저장(貯藏)을 겸할 수 있는 농가용(農家用) 태양열(太陽熱) 저장고(貯藏庫)의 개발(開發)에 필요(必要)한 기초자료(基礎資料)를 얻기 위(爲)하여 구조(構造)가 간단(簡單)하고 가격(價格)이 저렴한 콘크리트 벽체의 저장고(貯藏庫)와 그 지붕을 대신(代身)한 태양열집열기(太陽熱集熱器)를 설계(設計) 제작(製作)하여 집열기(集熱器)의 성능(性能)을 실험(實驗)에 의(依)하여 구(求)하였으며 집열기(集熱器)에서 가열(加熱)된 공기(空氣)와 상온통풍(常溫通風)에 의(依)한 벼의 건조특성(乾操特性)을 비교(比較) 분석(分析)하였다. 건조(乾操)된 곡물(穀物)의 저장시(貯藏時)에 그 온도(溫度)를 예측(豫測)할 수 있는 simulation model을 개발(開發)하여 그 적합성(適合性)을 검정(檢定)하고 저장곡물(貯藏殺物)의 각(各) 부위(部位)에 대(對)한 온도(溫度)의 변화(變化)를 분석(分析)한 결과(結果)들을 요약(要約)하면 다음과 같다. 1. 본(本) 실험(實驗)에 설계(設計) 제작(製作)된 태양열집열기(太陽熱集熱器)의 효율(效率)은 평균(平均) 26%였으며 총열전달계수(總熱傳達係數)는 약(約) $25kJ/hr.m^2\;^{\circ}K$였다. 2. 태양열(太陽熱)을 이용(利用)한 건조(乾燥)에서는 공시(供試)벼의 함수율(含水率) 23.5%에서 15.0%까지 건조(乾燥)시키는데 7일(日)이 소요(所要)되었으며 상온통풍건조(常溫通風乾燥)에서는 함수율(含水率) 20.0%에서 15.5%까지 건조(乾燥)시키는데 12일(日)이 소요(所要)되었다. 3. 건조소요시간(乾燥所要時間)은 태양열(太陽熱)을 이용(利用)한 건조(乾燥)가 배(倍) 정도(程度) 빠르나 하층부(下層部)의 곡물(穀物)의 과건현상(過乾現象)의 방지책(防止策)이 철저히 구명(究明)되어야 할 것이다. 4. 저장곡물(貯藏殺物)의 온도(溫度)를 예측(豫測)할 수 있는 simulation model을 finite difference method에 의(依)해 개발(開發)하였으며 검정(檢定) 결과(結果) 실측치(實測値)와 잘 일치(一致)되었다. 5. 저장곡물(貯藏殺物)의 온도(溫度) 변화(變化)는 벽체와 접촉(接觸)하고 있는 부위(部位)에서 컸으며 곡물(穀物)의 손상(損傷)도 이곳에서 심(甚)할 것으로 사료(思料)된다.