1 |
Architectural Institute of Japan (1993), Recommendations for the Design Fabrication of High Strength Bolted Joints, AIJ
|
2 |
Architectural Institute of Japan (2003), Guidebook on Design and Fabrication of High Strength Bolted Connections, AIJ
|
3 |
ASTM F2280 (2006), "Twist off" type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength, ASTM committee
|
4 |
Carl J. Lehmen (2002), Direct Tension Indicators, Practical Periodical on Structural Design and Construction, May, 48-51
|
5 |
Charles J. Oswald, Robert J. Dexter, and Steven K. Brauer (1996), "Field study of pretension in large diameter A490 bolts", J. Bridge Eng., Aug. 121-126
DOI
|
6 |
Drean, M., Habraken, A., Boucher, A. and Muzeau, J.P. (2002), "Swaged bolts: Modeling of the installation process and numerical analysis of the mechanical behavior", J. Comput. Struct., 80, 2361-2373
DOI
ScienceOn
|
7 |
Fukuoka, T. and Takaki, T. (2004), Evaluations of the Tightening Process of Bolted Joint with Elastic Angle Control Method, Analysis of Bolted Joints, July, PVP. 478, 11-18
DOI
|
8 |
Geoffrey L. Kulak and Scott T. Undershutte (1998), "Tension control bolts: strength and installation", J. Bridge Eng., Feb., 15-20
DOI
ScienceOn
|
9 |
Geoffrey L. Kulak, John W. Fisher, John H.A. Struik (2001), Guide to Design Criteria for Bolted and Riveted Joints, Edition, AISC, Inc
|
10 |
John H. Bickford (1990), An Introduction to the Design and Behavior of Bolted Joints, Marcel Dekker Inc., Madison Avenue, New York, NJ
|
11 |
John H. Bickford and Sayed Nassar (1998), "Handbook of bolts and bolted joints", Marcel Dekker Inc., Madison Avenue, New York, NJ
|
12 |
Jun Yang and John DeWolf (1999), "Mathematical model for relaxation in high strength bolted connections", J. Struct. Eng., Aug., 803-808
DOI
|
13 |
Jun Yang and John DeWolf (2000), "Relaxation in high strength bolted connections using galvanized steel", J. Bridge Eng., May, 99-106
DOI
|
14 |
Kim, J.H. (2001), "An experimental study on the structural behavior in friction type bolted joints clamping by F13T grade high strength bolt", J. Architect. Inst. Korea, 17(12)
|
15 |
Kim, J.H. and Choi, S.M. (2001), "An experimental study on the structural behavior in friction type bolted joint under cyclic loading", J. Architect. Inst. Korea, 17(1)
|
16 |
Kim, J.H., Woo, H.S. and Choi, S.M. (2003), "Design code and resistance capacity for slip critical connections of high strength bolts", J. Architect. Inst. Korea, 19(4), 27-35
|
17 |
Turvey, G.J. and Wang, P. (2005), "Failure of Pultruded GRP Single Bolt Tension Joints under Hot-wet Conditions", J. Compos. Struct., Aug., 1-7
|
18 |
Nah, H.S., Kim, K.S., Lee, H.J. and Kim, W.B. (2008), "Evaluation on clamping force of high strength bolts by temperature parameter", J. Architect. Inst. Korea, 20(3), 399-407
|
19 |
Park, Y.M. and Song, T.R. (2000), "Experimental evaluation of slip coefficients of friction type bolted connections with weathering steel", J. Korean Steel Struct., 12(2), 167-175
|
20 |
RCSC Committee A.1, American Institute of Steel Construction, Inc. (2000), "Specification for structural joints using ASTM A325 or A490 bolts", Jun. AISC, Inc
|