• Journal of Sensor Science and Technology
• /
• v.5 no.5
• /
• pp.21-29
• /
• 1996

A piezoresistive silicon acceleration sensor with 8 beams, utilized by an unique silicon micromachining technique using porous silicon etching method which was fabricated on the selectively diffused (111)-oriented $n/n^{+}/n$ silicon subtrates. The width, length, and thickness of the beam was $100\;{\mu}m$, $500\;{\mu}m$, and $7\;{\mu}m$, respectively, and the diameter of the mass paddle (the region suspended by the eight beams) was 1.4 mm. The seismic mass on the mass paddle was formed about 2 mg so as to measure accelerations of the range of 50g for automotive applications. For the formation of the mass, the solder mass was loaded on the mass paddle by dispensing Pb/Sn/Ag solder paste. After the solder paste is deposited, Heat treatment was carried out on the 3-zone reflow equipment. The decay time of the output signal to impulse excitation of the fabricated sensor was observed for approximately 30 ms. The sensitivity measured through summing circuit was 2.9 mV/g and the nonlinearity of the sensor was less than 2% of the full scale output. The output deviation of each bridge was ${\pm}4%$. The cross-axis sensitivity was within 4% and the resonant frequency was found to be 2.15 KHz from the FEM simulation results.

• Proceedings of the Korea Contents Association Conference
• /
• 2015.05a
• /
• pp.187-188
• /
• 2015

유방촬영은 날로 증가추세에 있으며 압박을통해 영상을 얻는 것이 화질을 향상시키고 피폭선량을 줄이는데 필수적이다. 그러나 압박대 자체의 두께로 인해 산란선과 피폭선량을 증가시킬 수 있으므로 압박대 재질에 대한 고찰이 필요하다. 현재 임상에서 쓰이고 있는 재질은 폴리카보네이트이며 플라스틱 계열이다. 환자의 피폭선량을 줄이기위해 노력한다면 이보다 더 좋은 재질에 대해 고려해볼 필요가 있기에 본 연구에서는 플라스틱 계열 물질 중 비결정 플라스틱에 대한 방사선투과성에 대해 비교해 보고자 한다.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.11a
• /
• pp.183-184
• /
• 2014

유방촬영은 날로 증가추세에 있으며 압박을 통해 영상을 얻는 것이 화질을 향상시키고 피폭선량을 줄이는데 필수적이다. 그러나 압박대 자체의 두께로 인해 산란선과 피폭선량을 증가시킬 수 있으므로 압박대 재질에 대한 고찰이 필요하다. 현재 임상에서 쓰이고 있는 재질은 폴리카보네이트이며 플라스틱 계열이다. 환자의 피폭선량을 줄이기 위해 노력한다면 이보다 더 좋은 재질에 대해 고려해볼 필요가 있기에 본 연구에서는 플라스틱 계열 물질과 탄소계열의 카본의 방사선투과성에 대해 비교해 보고자 한다.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.384-389
• /
• 2008

Three prototype chestnut harvesters were constructed and evaluated their chestnut collection ability and field efficiency. Air-lock paddle system successfully picked up all loose material, and pick up efficiency was about 56 kg/h. Power required to operate this system was evaluated to be 8.7 kW with an air flow rate of $32.6\;m^3/min$. A radial blade type blower with 0.41 m impeller diameter was considered to be a minimum size for this system. For the auger system, air was sucked into the cylinder as the hinged flat cover began to be opened by the material pushed by the auger, and the empty burrs flew back to the container through the space between auger flights and collected in the bottom of the container. It was considered to add a device to prevent air from flowing back or to use the back flowing air for separation of burrs and nuts inside the container. The venturi system could not pick up chestnuts, as they only carried part way up to the suction hose. Consideration was given to an idea that the venturi could be used as a cleaning and separation mechanism for containers filled with both empty burrs and good nuts. A minimum vacuum of 129 mm wg was required to pick up chestnuts, and the corresponding inlet air velocity was 19.3 m/s. 104 mm of vacuum, which was about 81 % of that required for nuts, was enough to pick up burrs with nuts inside. Also, empty burrs with higher moisture content recorded the same pressure as for the burrs with nuts.

• KSBB Journal
• /
• v.14 no.5
• /
• pp.534-538
• /
• 1999

For the optimization of operating conditions for plant cell suspension culture in bioreactors, effects of bioreactor types, various kinds of impellers, and aeration rates were examined using Nicotiana tabacum cells as a model system. Stirred tank bioreactor and airlift bioreactor were used for the comparison of bioreactor type. Growth rates in both bioreactors were lower than in shake flasks. In terms of final cell concentration, stirred tank bioreactor supported a little bit better growth compared to airlift bioreactor. Impeller type did not affect cell growth significantly, but it was apparent that cell size index decreased in the case of using hollowed paddle impeller. When the aeration rate was maintained at 0.3 vvm, cell growth was the best. At above 1.0 vvm, growth inhibition as well a browning was noticed. In addition, it was found that cell size index reduced proportionally to the increased of aeration rate.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.99-104
• /
• 2003

This paper described the general dynamic point for rotor design and the design procedure of low vibration blade. Generally, rotor rotating natural frequencies are determined to minimize hub loads, blade vibration and to suppress ground resonance at rotor design stage. First, through rotor frequency diagram, natural frequencies must be far away from resonance point and rotating loads generated from blade can be transformed to non-rotating load to predict fuselage vibration. Vibration level was predicted at each forward flight condition by calculating cockpit's vertical acceleration transferred from non-rotating hub load assuming a fuselage as a rigid body. This design method is applied to design current Next-generation Rotor System Blade(NRSB) and will be applied to New Rotor which will be developed Further.

• Journal of Korean Neurosurgical Society
• /
• v.54 no.6
• /
• pp.501-506
• /
• 2013

Objective : Spinal cord stimulation (SCS) is an effective means of treatment of chronic neuropathic pain from failed back surgery syndrome (FBSS). Because the success of trial stimulation is an essential part of SCS, we investigated factors associated with success of trial stimulation. Methods : Successful trial stimulation was possible in 26 of 44 patients (63.6%) who underwent insertion of electrodes for the treatment of chronic pain from FBSS. To investigate factors associated with successful trial stimulation, patients were classified into two groups (success and failure in trial). We investigated the following factors : age, sex, predominant pain areas (axial, limb, axial combined with limbs), number of operations, duration of preoperative pain, type of electrode (cylindrical/paddle), predominant type of pain (nociceptive, neuropathic, mixed), degree of sensory loss in painful areas, presence of motor weakness, and preoperative Visual Analogue Scale. Results : There were no significant differences between the two groups in terms of age, degree of pain, number of operations, and duration of pain (p>0.05). Univariate analysis revealed that the type of electrode and presence of severe sensory deficits were significantly associated with the success of trial stimulation (p<0.05). However, the remaining variable, sex, type of pain, main location of pain, degree of pain duration, degree of sensory loss, and presence of motor weakness, were not associated with the trial success of SCS for FBSS. Conclusion : Trial stimulation with paddle leads was more successful. If severe sensory deficits occur in the painful dermatomes in FBSS, trial stimulation were less effective.

• Environmental Analysis Health and Toxicology
• /
• v.29
• /
• pp.2.1-2.7
• /
• 2014

Objectives Heat shock protein 90 (HSP90) is a highly conserved molecular chaperone important in the maturation of a broad spectrum of protein. In this study, an HSP90 gene was isolated from Asian paddle crab, Charybdis japonica, as a bio-indicator to monitor the marine ecosystem. Methods This work reports the responses of C. japonica HSP90 mRNA expression to cellular stress by endocrine disrupting chemicals (EDCs), such as bisphenol A (BPA) and 4-nonylphenol (NP) using real-time. reverse transcription polymerase chain reaction. Results The deduced amino acid sequence of HSP90 from C. japonica shared a high degree of homology with their homologues in other species. In a phylogenetic analysis, C. japonica HSP90 is evolutionally related with an ortholog of the other crustacean species. The expression of HSP90 gene was almost distributed in all the examined tissues of the C. japonica crab but expression levels varied among the different body parts of the crabs. We examined HSP90 mRNA expression pattern in C. japonica crabs exposed to EDCs for various exposure times. The expression of HSP90 transcripts was significantly increased in C. japonica crabs exposed to BPA and NP at different concentrations for 12, 24, 48 and 96 hours. The mRNA expression of HSP90 gene was significantly induced in a concentration- and time-dependent manner after BPA or NP exposures for 96 hours. Conclusions Taken together, expression analysis of Asian paddle crab HSP90 gene provided useful molecular information about crab responses in stress conditions and potential ways to monitor the EDCs stressors in marine environments.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.467-470
• /
• 2011

In this study, two different kind of impeller, commercial hand blender and manual type were used to investigate the most effective mixing method for simulant gel propellant. Ionized Water, Carbopol 941 and NaOH were used to produce the simulant gel for temperature of $25^{\circ}C$ and $50^{\circ}C$. The amount of bubbles produced during mixing of simulant gel at $50^{\circ}C$ were higher than that of simulant gel at $25^{\circ}C$. After 24 hours, bubbles of simulant gel made at $50^{\circ}C$ disappeared rapidly with respect to the bubbles of gel made at $25^{\circ}C$. Bubbles from blender did show notable amount even after 24 hours. Among mixing type, it was found that the pitched paddle impeller was the best candidate for the production of simulant gel.

• Journal of radiological science and technology
• /
• v.22 no.2
• /
• pp.9-15
• /
• 1999

The aim of this study is to measure the application of prone compression study using compression paddle for obese patients in upper gastrointestinal series. Prone compression study using compression paddle was performed in fifty patients, who were not examined completely erect compression study for obesity. The radiographs of stomach were classified into the lower, middle, and high body and then we gave five points included 'very poor', 'poor', 'suspicious', 'good', and 'complete' according to level of detection for area gastrica and mucosal fold. Statistic analysis was performed using T-test and ANOVA, and confidence rate was fixed in 95%(P<0.05) for the significance. The results were as follows : 1. The compression marks on high body was 'poor' grades in erect and prone compression study. The points were 1.64 and 1.86, respectively. 2. The compression marks on middle body was 1.68 in erect compression study, and 'suspicious' in prone compression study. 3. The compression marks on lower body was 'poor' in erect compression study, and 'good' in prone compression study. 4. There was a high statistic signification between the two study on middle and lower body except for high body(P<0.01). 5. The average abdominal thickness of subjects was 23.98 centimeter. There was no statistic signification between the difference of average marks by the abdominal thickness(P>0.05). As these results, the prone compression study in upper gastrointestinal serie seem to be an useful study for obese patients, because it decreases pain and the feeling of uneasiness, and improve compression efficiency remarkably.