• 한국세라믹학회지
• /
• 제34권9호
• /
• pp.979-985
• /
• 1997

The three-dimensional particle packing process is simulated using Lahey FORTRAN 90 as a programming language running on a personal computer. Particle clusters constructed with rearrangement which occurs during packing have higher average coordination number and packing density than particle clusters rearranged after packing. Rearranging particles can not completely block other particles from entering pore volume in 3-dimensional packing unlike in 2-dimensional packing. It is found that there is a region of instability where lower packing density results from the destruction of the ordered packing.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1254-1255
• /
• 2006

For precise property control of sintered products, it is important to understand accurately the packing density of the powder. We developed a packing simulation program that could make a packed bed of spherical particles having particle size distribution. In addition, the influence of the particle shape of the actual powder on the packing density was quantitatively analyzed. The predicted packing densities corresponded well to the actual data.

• 한국시뮬레이션학회논문지
• /
• 제11권2호
• /
• pp.67-75
• /
• 2002

This paper proposes a parallel simulation algorithm for bounded Petri nets in a single processor, which exploits the SIMD(Single Instruction Multiple Data)-type parallelism. The proposed algorithm is based on a data packing scheme which packs multiple bytes data in a single register, thereby being manipulated simultaneously. The parallelism can reduce simulation time of bounded Petri nets in a single processor environment. The effectiveness of the algorithm is demonstrated by presenting speed-up of simulation time for two bounded Petri nets.

• 한국농공학회논문집
• /
• 제47권1호
• /
• pp.13-22
• /
• 2005

Despite the variety in sizes and shapes of agricultural products, the unified standardization of packing has been a long time necessity. In this study the stacking efficiency of packing standards for each box using packing Monte Carlo simulation based on the standard pallet is evaluated. As a result of simulation the unified packing standard for agricultural products is suggested by 550$\times$366 mm. With this study it is expected that the unification of the standards can help to increase the utilization of reusable packages and to improve efficiency of agricultural logistics.

• Computers and Concrete
• /
• 제9권2호
• /
• pp.119-131
• /
• 2012

Optimum packing of aggregate is an important aspect of mixture design, since porosity may be reduced and strength improved. It may also cause a reduction in paste content and is thus of economic relevance too. Several mathematic packing models have been developed in the literature for optimization of mixture design. However in this study, numerical simulation will be used as the main tool for this purpose. A basic, simple theoretical model is used for approximate assessment of mixture optimization. Calculation and simulation will start from a bimodal mixture that is based on the mono-sized packing experiences. Tri-modal and multi-sized particle packing will then be discussed to find the optimum mixture. This study will demonstrate that computer simulation is a good alternative for mixture design and optimization when appropriate particle shapes are selected. Although primarily focusing on aggregate, optimization of blends of Portland cement and mineral admixtures could basically be approached in a similar way.

• 한국주조공학회지
• /
• 제42권6호
• /
• pp.347-357
• /
• 2022

본 연구에서는 주조공장의 장입재 충전 거동을 3차원적으로 시각화하고자 하였다. 장입재와 용해로의 실제 조건을 반영하여 시뮬레이션하였다. 3차원 시각화 시뮬레이션이 제조 현장의 장입재 충전 거동을 사실적으로 잘 구현하는지 확인하였다. 3차원 시각화 시뮬레이션에 의한 현실적인 충전 상태를 이상적인 충전 상태와 비교하였다. 어떤 경우에 두 충전 상태의 차이가 발생하는지 분석하였다. 3차원 시각화 시뮬레이션을 제조 공정에 적용할 경우의 특징을 살펴보았고, 주조 분야에서의 여러 활용 방안을 제안하였다.

• 한국정밀공학회지
• /
• 제31권1호
• /
• pp.9-13
• /
• 2014

The molding process can be divided into five separate steps: plastification, injection, holding, cooling, and finally ejection. In the plastic injection molding, the effect factor such as mold temperature, injection speed, packing pressure and inhomogeneous cooling under packing process affects both the article dimension and physical characteristics. Especially, the packing pressure is the most critical factor to affect molded articles quality among the packing parameters. In this paper, the CAE simulation considering the molding condition is performed to predict the faulty cause which appears in the packing process between cavities of injection molding machine. From the results of CAE simulation, the packing phenomena according to the product form and the gate position was investigated to improve the article quality and minimize the various molding defects. The effect of packing pressure and gate number on the injection molding was discussed.

• The Korean Journal of Ceramics
• /
• 제6권1호
• /
• pp.1-5
• /
• 2000

Particle packing properties are important to develop high technology products in the field of cement and concrete. Two types of particle packing models for aggregates with sand and cement were introduced: the loose and the dense aggregate packing. Aggregate packing models with randomly generated sand and cement particles in the interstices of aggregates fit the Furnas model very well. Different aggregate models show different packing properties with the experimental results. Main reason for the difference with the experimental results is due to sand rearrangement in the loose aggregate packing model and to aggregate relaxation in the dense aggregate packing model. In the experimental situation, aggregates seem to be more disordered and have a relaxed packing structure in the dense packing, and sands seem to have a more rearranged packing structure in the loose packing model.

• 한국기계가공학회지
• /
• 제18권4호
• /
• pp.56-61
• /
• 2019

In this country, mackerel landing, sorting, and packing are mostly performed manually, which is time consuming and labor intensive. An unloading automation system saves time and labor by automating the landing, sorting, and packing processes. Casers are devices for manufacturing packing boxes for fish used by unloading automation systems. The caser design in this study is for mackerel packing boxes. This caser makes a packing box based on a press using the caser's slide crank. When the caser makes a packing box, the manufacturing sequence is determined by the caser's production guide and assisting rod. The caser design in this study is simulated using a multi-body dynamics program. The simulation is used to analyze the caser and to visualize the box-making sequence.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.31-45
• /
• 2013

PURPOSES : Determination of particle packing model variables that can be used for formulation of new DEM based particle packing model by examining existing particle packing models METHODS : Existing particle packing models are thoroughly examined by analytical reformulation and sensitivity analysis in order to set up DEM based new particle packing model and to determine its variables. All model equations considered in this examination are represented with consistent expressions and are compared to each others to find mathematical and conceptual similarity in expressions. RESULTS : From the examination of existing models, it is observed that the models are very similar in their shapes although the derivation of the models may be different. As well, it is observed that variables used in some existing models are comprehensive enough to estimate particle packing but not applicable to DEM simulation. CONCLUSIONS : A set of variables that can be used in DEM based particle packing model is determined.