• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.248-255
• /
• 2013

The objective of this study is to optimize the Metal Injection Molding(MIM) process with design of experiments(DOE) and numerical analysis. To derive the optimal process condition, experiment or numerical analysis was performed under various process conditions. To analyze the interaction among influential factors contributing to the temperature at flow front and response surface in MIM, both central point and axial point were added to the full factorial design with 2 levels and 5 factors and then their impacts on response variable in 43 experimental conditions were analyzed and the significance was evaluated. As a result, sprue, runner, and gate were completely filled in about 0.247 seconds after injection, the front part of the green body was filled in about 0.3344 seconds, the green body except gate, etc changed to almost solid state in about 3.29 seconds, the Packinging pressure was completed in about 6.29 seconds, and the green body inside and outside and sprue, etc became solid in 13.2 seconds. The impact of individual or reciprocal action of factors on the temperature at flow front was analyzed through regular probability, test statistics, main effect, and interaction effect. As a result, of a total of 31 combinations of factors, 9 unit factors and reciprocal actions were significant, and the screening was also possible. A proper regression equation was drawn with regression analysis and response surface design on the response variable of temperature at flow front, and the applicability could be verified.

• 한국연초학회지
• /
• 제28권1호
• /
• pp.43-50
• /
• 2006

The objective of the present study is to induct the regression equation for the hardness prediction of cellulose acetate filter which was manufactured by the domestic cellulose acetate tow manufacturer. As a result of our study, the hardness of filter was increased with increasing the plasticizer content and packing density as major factors affecting to the filter hardness. As a result which was obtained by the three dimensional response surface methodology in STATISTIC A program, the hardness prediction value well fitted with experiment result on the high plasticizer content. To make up for the this equation, the new modified fraction of solid factors which was contained the mono denier factor was introduced to the hardness prediction equation, and this third regression equation which was sufficient for the wide plasticizer content, was obtained by the three dimensional response surface methodology in STATISTICA. This results indicated that the third regression equation which was obtained this study was applicable for the hardness prediction of cellulose acetate filter which was manufactured by the domestic cellulose acetate tow manufacturer.

• 한국산업보건학회지
• /
• 제30권3호
• /
• pp.292-298
• /
• 2020

Objectives: The aim of this research is to establish Similar Exposure Groups (SEGs) for chemical and biological risk factors that occur in farm work involving 24 tasks among 15 crops. Methods: To categorize SEGs, work type, work environment, and similar tasks for each crop were considered. After confirming the chemical risk factors (pesticides, inorganic dust-total dust and PM₁₀, ammonia, and hydrogen sulfide) and biological factors (organic dust-total dust and PM₁₀, and endotoxins) that occur in the crops and tasks, similar crops and tasks were selected as SEGs. Results: Among chemical risk factors, pesticides was selected for the SEGs, which was categorized by open field, greenhouse, fruit, and specialty crops. For inorganic dust, open field (plowing harrowing, seedling, planting, harvest, and sorting and packing) and specialty crops (plowing harrowing, seedling, planting, and harvest) were selected as SEGs. For ammonia and hydrogen sulfide, livestock (preparation of farm, management of nursery bed, feeding, shipment and manure treatment) were selected as SEGs. For biological risk factors such as organic dust (total dust, PM₁₀) and endotoxins, open field (manure application), greenhouse (plowing harrowing, planting, manure application, and harvest), fruit (manure application), specialty crops (manure application, making furrows, mixing mushroom media, harvest, and sorting and packing), and livestock (preparation of farm, maintaining poultry litter, feeding, shipment and manure treatment) were selected as SEGs. Conclusions: To establish similar exposure groups in agriculture, it is important that the characteristics of each hazard factor are categorized by identifying risk factors occurring by tasks.

• 공업화학
• /
• 제10권6호
• /
• pp.949-953
• /
• 1999

반도체 봉지재에 쓰이는 EMC(Epoxy Molding Compound)는 고농도의 충전제를 함유하고 있는데, 이 충전제의 양과 성질에 따라 유동 특성이 크게 달라진다. 본 연구에서는 충전제의 농도, 입자모양, 크기에 따른 EMC(에폭시/실리카)의 점도변화 특성을 조사하였고, 이를 Mooney 식을 사용하여 예측하여 보았다. Mooney 식에 포함되어 있는 최대 충전율과 형상인자 중 최대 충전율은 Ouchiyama의 충전 모델과 Taguchi의 방법을 이용하여 구하였고, 형상인자는 실험자료를 이용하여 구하였다. 구해진 Mooney 식은 EMC의 점도 거동을 잘 예측하였다.

• Applied Biological Chemistry
• /
• 제41권2호
• /
• pp.141-146
• /
• 1998

조생온주의 적정 수확시기를 결정하기 위하여 선과장에서 수집한 시료와 감귤나무에서 시기별로 직접 수확한 시료의 이화학적 품질을 분석하였다. 궁천조생과 흥진조생 모두 10월 중순까지 감귤의 비대가 계속 일어났으며, 이후에도 당도는 계속하여 증가하였다. 나무에 달려 있는 위치에 따라서도 감귤의 크기가 다른 경향을 보였으며, 남쪽 방향의 중간 위치에 달려 있는 감귤이 품질면에서 비교적 우수한 것으로 나타났다. 감귤의 품질에 관여하는 가용성고형물, 경도, 총당, pH, 착색도 등을 종합적으로 볼 때 흥진조생의 경우 11월 하순에, 그리고 궁천조생의 경우 12월 초순에 수확하는 것이 품질면에서 좋을 것으로 보였다. 선과장에서 수집한 시료는 농가에서 관행수확시에 수확한 다음 상온저장 후에 시기별로 출하하기 때문에 정확한 수확시기를 결정하는데는 미흡한 것으로 여겨졌다.

• 폴리머
• /
• 제35권6호
• /
• pp.513-519
• /
• 2011

침투 가능한 구형 모델 유체의 충돌 특성을 고찰하고자 분자 동력학 방법을 이용한 전산 모사를 수행하였다. 이로부터 다양한 범위의 입자 충전 분율 ${\phi}$ 및 척력적 에너지 ${\varepsilon}^*$ 조건에 대한 충돌 빈도수, 평균 자유 행로, 강체형 반사 충돌각 및 연체형 침투 충돌각의 분포도, 유효 충전 분율 등을 계산하였다. 낮은 척력적 에너지 조건에서는 연체형 충돌이 주된 특성이나, 반면 높은 척력적 에너지 조건에서는 강체형 충돌이 주된 요인이었다. 매우 흥미롭게도, 전체 충돌 빈도수에 대한 연체형 충돌비(또는, 강체형 충돌비)는 정준 앙상블의 몬테카를로 전산 모사에서 받아들임 확률(또는, 되돌림 확률)로 표시되는 볼쯔만 인자와 직접적으로 관계되었다. 이와 같은 거동 입자들의 동적 충돌 특성들은 ${\varepsilon}^*{\geqq}3.0$ 및 ${\phi}{\geqq}0.7$ 범위의 높은 척력적 에너지 및 높은 충전 분율 조건에서 제한적이었으며, 이는 침투성 구형 모델에서 나타나는 클러스터 형성 구조를 함축하고 있다.

• 한국재료학회지
• /
• 제30권12호
• /
• pp.650-654
• /
• 2020

A combination of Polycarbonate (PC) material and Polymethylmethacrylate (PMMA), fabricated using an injection molding machine, has been investigated to determine its advantages, as studied in Ref. 1). This paper aims to investigate the optimization of PMMA/PC blend for both tensile yield strength and impact strength. Furthermore, interaction effects of process conditions on mechanical properties including tensile yield strength and impact strength of PMMA/PC blend by injection molding process are interpreted in this study. Tensile and impact specimens are designed following ASTM, type V, and are fabricated by injection molding process. The processing conditions such as melt temperature, mold temperature, packing pressure, and cooling time are applied; each factor has three levels. As a result, in comparison with optimization of separated responses, mechanical properties of PMMA/PC are found to decrease when optimizing both tensile and impact strengths simultaneously. The melt temperature is found to be the most significant interaction parameter with the mold temperature and packing pressure. In addition, there is more interaction between the mold temperature and cooling time. This investigation provides a useful understanding of the control of injection molding processing of polymer blends in optical application.

• 한국환경과학회지
• /
• 제20권7호
• /
• pp.881-890
• /
• 2011

In this study, thermal environment changes for a marathon course of IAAF World Championship, Daegu 2011 were modeled to provide improvements of thermal environment, so that runners could have the maximum condition and citizens pleasant streets. The three biggest size of intersections were selected for the study. Envi-met, 3G microclimate model, were used for a thermal environment analysis and three different cases - present status, planting roadside tree scenario, and roof-garden scenario - were compared. The followings are the results of the study. 1. The highest thermal distribution were shown at 1 p.m., but there was no significant difference between a thermal distribution at 1 p.m. and that at 5 p.m. since a heat flux from buildings affects thermal distributions rather than insolation does. 2. Tree planting or adding environmental friendly factors might lead a temperature drop effect, but the effect was not significant for areas covered with impermeability packing materials such as concrete or asphalt (especally, for Site case 2) 3. The combination of tree planting and adding environmental friendly factors also brought a temperature drop effect (Site 1 and 2) and this case showed even better result if green spaces (especially, parks) were closed.

• 한국식품과학회지
• /
• 제12권1호
• /
• pp.53-58
• /
• 1980

건조(乾燥) 고추의 변색(變色) 요인(要因)을 구명(究明)키 위(爲)하여 수분(水分) 활성(活性), 광선(光線), 산소(酸素) 및 온도(溫度)를 달리 했을 때의 capsanthin의 소장(消長)과 또 몇가지 구장재(句裝材)로 가루, 원형(原形) 및 원형(原形) 압축(壓縮) 상태(狀態)로 포장(包裝)하여 capsanthin 양(量)과 색도(色度)에 관한 시험(試驗) 결과(結果)는 다음과 같다. 1. 고추의 capsanthin에 미치는 상온하(常溫下)($25^{\circ}C$)의 한계(限界) 수분(水分) 활성(活性)은 0.75이었다. 2. Capsanthin의 감소(減少)는 적외선(赤外線), 백열등(白熱燈) 하(下)에서 보다 자외선(紫外線) 이 심했다. 3. Capsanthin의 질산(窒素) 가스 내(內)에서는 거의 감소(減少)가 없었고 공기(空氣) 내(內)에서 심함 감소(減少)가 있는 것으로 보아 고추의 변색(變色)은 주(主)로 산화(酸化) 작용(作用)에 기인(基因)하는 것으로 본다. 4. $9{\sim}11$월(月)의 상온(常溫)과 저온(低溫) 저장(貯藏) 시(時)에는 포장(包裝)된 고추의 capsanthin의 변화(變化)는 별로 차이(差異)가 없었다. 5. 형태(形態) 별(別) 3개월(個月) 저장(貯藏) 시험(試驗) 결과(結果)는 capsanthin 양(量)과 색도(色度)는 가루 저장(貯藏)이 가장 높았다. 6. 포장(包裝) 재료(材料) 별(別) 밀봉(密封) 저장(貯藏) 시험(試驗) 결과(結果)는 투수성(透水性)과 투기성(透氣性)이 없는 재료(材料)가 P.E.보다 capsanthin 양(量)과 색도(色度)가 높았다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.823-828
• /
• 2002

Concrete used up to date semipermanent architecture material but now day concrete early deterioration emboss social issue because of construction structure and environmental factor. so, many study of deterioration concrete construction improve durability used impregnation alkalization agent. Impregnation alkalization agent deterioration concrete construction spray infiltration or diffusion improve alkali and filler inter minuteness void elaborateness constitution concrete. but many study of harding concrete change inter minuteness void that Is insufficiency also, To study of method recover shape impregnation alkalization agent apply deterioration concrete construction. impregnation alkalization agent infiltration according to test of porosity, premeameter, absorption.