• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.45-50
• /
• 2014

A fully packed capillary electrochromatographic (CEC) microchip with an on-column micro-solid phase extraction (SPE) bed for the preconcentration and separation of organic analytes was prepared. A linear microchannel with monodisperse colloidal silica packing was formed on a cyclic olefinic copolymer microchip with two reservoirs on both ends. Silver-cemented silica packing frit structure was formed at the entrance of the microchannel by electroless plating treatment as a base layer. A gold coating was formed on it by reducing $Au^{3+}$ to gold with hydroxylamine. Finally micro-SPE bed was formed by self-assembly adsorption of 1-dodecanethiol on it. Micro-SPE beds were about 100-150 ${\mu}m$ long. Approximately $10^3$ fold sensitivity enhancements for Sulforhodamine B, and Fluorescein in nM concentration levels were possible with 80 s preconcentration. Basic extraction characteristics were studied.

• Korean Journal of Agricultural Science
• /
• v.22 no.2
• /
• pp.231-243
• /
• 1995

This paper aims to study regional difference in strawberry farming technology and its causal factors based on the survey of controlled strawberry farmers in three major strawberry cultivating regions, which are Nonsan county of Chungnam Province, Damyang County of Junnam Province and Guchang County of Kyungnam Province. There are differences in variety adoption, packaging and grading method which cause the farming income gap among these regions. Farmers of Guchang County, who adopt new variety Yeobong and packing system, raised highest gross receipts but ranked next to Damyang in terms of net income because of high packing cost. Farmers of Nonsan County earned lowest income because of poor quality and low price in spite of adopting packing cost saving method. Therefore, results of this study shows that successful farming technology depend on whether or not farmers adopt market oriented technology. It is suggested that direction of strawberry farming technology should focus on adopting new varieties which can contribute to increasing farmers' paid price and developing technology of reducing cost such as labor saving and packing machine.

• Management Science and Financial Engineering
• /
• v.18 no.2
• /
• pp.19-22
• /
• 2012

In the bin-packing problem, we deal with how to pack the items by using a minimum number of bins. In the inverse bin-packing number problem, IBPN for short, we are given a list of items and a fixed number of bins. The objective is to perturb at the minimum cost the item-size vector so that all items can be packed into the prescribed number of bins. We show that IBPN is NP-hard and provide an approximation algorithm. We also consider a variant of IBPN where the prescribed solution value should be returned by a pre-selected specific approximation algorithm.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.3
• /
• pp.358-367
• /
• 1998

Since the performance of cooling tower is strongly dependent on the thermal performance of the packing, the evaluations of heat transfer rate and fan power from various packing have attracted intense interest. In the present study, two new packings have been devised and their performances have been compared with those of two existing packings to find better shape characteristic. It is found that one of the existing packings, which showed high heat transfer rate and medium fan power due to zig -zag flow passages and highly irregular surfaces, should be adapted.

• Microbiology and Biotechnology Letters
• /
• v.13 no.3
• /
• pp.209-212
• /
• 1985

The cell density and packing characteristics of Escherichia coli immobilized in a dual hollow fiber bioreactor consisting of outer silicone membrane for oxygen transport and three inner isotropic polypropylene hollow fibers for substrate transport were investigated. The cells have grown forming the layer like animal tissue in a nearly 100％ packing density. The dry biomass density was 550g/liter of void volume for cell growth, which was the highest among the biomass densities ever reported.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.293-296
• /
• 2008

Injection molding operation consists of filling, packing, and cooling phase. The highest pressure is involved during the packing phase among the operation phases. Cavity pressure depends upon velocity to pressure switchover time and magnitude of packing pressure. The cavity pressure is directly related to stress concentration in the cavity of mold. Thus the observation and control of cavity pressure is very important to prevent mold cracking. In this study, cavity pressures were observed for operational conditions using the commercial CAE software, Moldflow. Operational conditions were velocity to pressure switchover time and packing pressure. Cavity pressures were also measured directly during injection molding. Simulation and experimental results showed good agreement.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.139-147
• /
• 1999

Rapid Prototyping has made a drastic change in all industries which needs to reduce the time for the development of new products. Orientation and packing in rapid prototyping is considered as the most important factors to maximize the utilization of space in the build chamber and reduce build time. However, the decision of these parameter is mainly dependant on the operators's experience. This paper presents the methodology to find the optimal build layout considering an orientation and packing of multiple parts in SLS processing. Each part is represented as a voxel structure to deal with the inefficiency in a bounding box approach. Test results show that the adapted BL algorithm with a genetic algorithm(GA) can be applicable to a real industry.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.451-453
• /
• 2003

본 논문은 블루투스 MAC 계층에서의 패킷 스케줄링 성능의 개선을 목적으로 한다 현재 대부분의 많은 블루투스 MAC 계층 스케줄링 방식은 라운드로빈(RR)을 사용하고 있는데, 많은 슬롯과 시간을 낭비하게 되고 최적화된 업링크와 다운링크에 적합하지 않다. 한편, 블루투스의 마스터 노드에서 생기는 자원 낭비 문제를 해결하기 위한 몇 가지 MAC 스케줄링 알고리즘이 있다. 본 논문에서는 Bin-packing 과 DRR 을 이용하는 MAC 계층에서의 효과적인 패킷 스케줄링 알고리즘을 제안하고 시뮬레이션을 통해서 그 성능이 기존 방식에 비해 우월함을 보인다.

• Communications of the Korean Mathematical Society
• /
• v.13 no.4
• /
• pp.781-789
• /
• 1998

Let K be a loosely self-similar set. Then a-dimensional packing measure of K is the same as that of a Borel subset K( $r_1^{\alpha}$ㆍㆍㆍ$r_{m}$ $^{\alpha}$/) of K. And packing dimension of K is equal to that of K\K( $r_1^{\alpha}$ㆍㆍㆍ $r_{m}$ $^{\alpha}$/) and K( $r_1^{\alpha}$ㆍㆍㆍ $r_{m}$ $^{\alpha}$/).X> $^{\alpha}$/)).

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.130-137
• /
• 1996

In the present paper the effect of various process conditions on the final weight of injection molded rectangular plates has been investigated in detail. The main parameters involved in the simulations were melt temperature, mold temperature, injection speed and packing pressure. The dimensions of the plate used were 100mm long, 2mm of width and polystyrene was used as a molding material. The shear viscosity of the polymeric material was treated as a function of shear rate, temperature and pressure through the whole processes including packing and cooling stages. By increasing a packing pressure the final weight of sample increased linearly. Furthermore, as the melt temperature, the mold temperature and the injection speed increased, the final weight of the injection molded plate decreased within the molding window.