• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.121-124
• /
• 1999

In a packet-switched wireless cellular network, a packet destined to a mobile station is queued at a base station and then broadcast over the base station's cell. When an active mobile station leaves a cell, there re-main packets which are destined to the mobile and not yet delivered to it at the cell's base station. For application which are sensitive to packet losses, such back- logged packets must be forwarded to the new base station. Otherwise, an end-to-end retransmission may be required. However, an increase in packet delay is incurred by employing the packet forward scheme, since a packet may be forwarded many times before it is delivered to the destined mobile station. For an enhanced quality-of-service level, it is preferred to reduce tile packet delay time. In this paper, we develop an analytical approximation method for deriving mean packet delay times. Using the approximation and simulation methods, we investigate the effect of network parameters on the packet delay time.

• Journal of Communications and Networks
• /
• 제16권5호
• /
• pp.548-558
• /
• 2014

Load distribution is vital to the performance of multipath transport. The task becomes more challenging in real-time multimedia applications (RTMA), which impose stringent delay requirements. Two key issues to be addressed are: 1) How to minimize end-to-end delay and 2) how to alleviate packet reordering that incurs additional recovery time at the receiver. In this paper, we propose sub-packet based multipath load distribution (SPMLD), a new model that splits traffic at the granularity of sub-packet. Our SPMLD model aims to minimize total packet delay by effectively aggregating multiple parallel paths as a single virtual path. First, we formulate the packet splitting over multiple paths as a constrained optimization problem and derive its solution based on progressive approximation method. Second, in the solution, we analyze queuing delay by introducing D/M/1 model and obtain the expression of dynamic packet splitting ratio for each path. Third, in order to describe SPMLD's scheduling policy, we propose two distributed algorithms respectively implemented in the source and destination nodes. We evaluate the performance of SPMLD through extensive simulations in QualNet using real-time H.264 video streaming. Experimental results demonstrate that: SPMLD outperforms previous flow and packet based load distribution models in terms of video peak signal-to-noise ratio, total packet delay, end-to-end delay, and risk of packet reordering. Besides, SPMLD's extra overhead is tiny compared to the input video streaming.

• 인터넷정보학회논문지
• /
• 제18권6호
• /
• pp.65-73
• /
• 2017

Congestion occurring at wireless sensor networks(WSNs) causes packet delay and packet drop, which directly affects overall QoS(Quality of Service) parameters of network. Network congestion is critical when important data is to be transmitted through network. Thus, it is significantly important to effectively control the congestion. In this paper, new mechanism to guarantee reliable transmission for the important data is proposed by considering the importance of packet, configuring packet priority and utilizing the settings in routing process. Using this mechanism, network condition can be maintained without congestion in a way of making packet routed through various routes. Additionally, congestion control using packet service time, packet inter-arrival time and buffer utilization enables to reduce packet delay and prevent packet drop. Performance for the proposed mechanism was evaluated by simulation. The simulation results indicate that the proposed mechanism results to reduction of packet delay and produces positive influence in terms of packet loss rate and network lifetime. It implies that the proposed mechanism contributes to maintaining the network condition to be efficient.

• 한국통신학회논문지
• /
• 제24권10B호
• /
• pp.1852-1860
• /
• 1999

본 논문에서는 음성 패킷을 전송하기 위해 새로 제시되어 표준화된 AAL2의 성능을 이산 시간 시뮬레이션 모형(discrete-time simulation model)을 통해 분석하였다. 시뮬레이션의 입력 파라메터로는 AAL2 PDU를 만들기 위한 패킷 필 지연 시간(packet fill delay), 여러 AAL2 PDU로부터 ATM 셀을 만들기 위한 셀 생성 지연(guard time), 음성 트래픽의 특성을 정의하는 버스트 정도(burstness), 그리고 사용자 수(number of channels)로 하였으며 이 값의 변화에 따른 음성 패킷의 양종단 지연 시간 변이(end-to-end delay variation)을 계산하여 각각의 파라미터가 음성 패킷의 성능에 미치는 영향을 분석하였다.

• ETRI Journal
• /
• 제28권1호
• /
• pp.31-44
• /
• 2006

In a packet switching network, congestion is unavoidable and affects the quality of real-time traffic with such problems as delay and packet loss. Packet fair queuing (PFQ) algorithms are well-known solutions for quality-of-service (QoS) guarantee by packet scheduling. Our approach is different from previous algorithms in that it uses hardware time achieved by sampling a counter triggered by a periodic clock signal. This clock signal can be provided to all the modules of a routing system to get synchronization. In this architecture, a variant of the PFQ algorithm, called digitized delay queuing (DDQ), can be distributed on many line interface modules. We derive the delay bounds in a single processor system and in a distributed architecture. The definition of traffic contribution improves the simplicity of the mathematical models. The effect of different time between modules in a distributed architecture is the key idea for understanding the delay behavior of a routing system. The number of bins required for the DDQ algorithm is also derived to make the system configuration clear. The analytical models developed in this paper form the basis of improvement and application to a combined input and output queuing (CIOQ) router architecture for a higher speed QoS network.

• 제어로봇시스템학회논문지
• /
• 제13권11호
• /
• pp.1099-1105
• /
• 2007

In this paper, modified two-port time-domain passivity approach is proposed for stable bilateral control of teleoperators under time-varying communication delay. We separate input and output energy at each port of a bilateral controller, and propose a sufficient condition for satisfying the passivity of the bilateral controller including time-delay. Output energy at the master port should be less than the transmitted input energy from the slave port with time-delay, and output energy at the slave port should be less than the transmitted input energy from the master port with time-delay. For satisfying above two conditions, two passivity controllers are attached at each port of the bilateral controller. A packet reflector with wireless internet connection is used to introduce serious time-varying communication delay of teleoperators. Average amount of time-delay was about 190(msec) for round trip, and varying between 175(msec) and 275(msec). Moreover some data packet was lost during the communication due to UDP data communication. Even under the serious time-varying delay and packet loss communication condition, the proposed approach can achieve stable teleoperation in free motion and hard contact as well.

• 정보처리학회논문지C
• /
• 제12C권3호
• /
• pp.437-442
• /
• 2005

인터넷 망의 종단간 혼잡상태를 유추할 수 있는 가장 일반적인 방법은 RTT (Round Trip Time)값을 측정하는 것이며, 이 방법으로 망의 흔잡 정도를 측정할 수 있다. 그러나 RTT는 패킷의 왕복 시간만을 측정하기 때문에 패킷의 송수신시 순방향과 역방향에서 어느 정도의 혼잡과 전송지연이 발생하였는가는 알 수가 없다. 본 논문에서는 패킷이 전송될 때 순방향/역방향 전송 지연을 계산하여, 망의 흔잡 상태를 정확하게 유추할 수 있는 새로운 알고리즘을 제시한다. 본 알고리즘에서는 여러 RTT 값들 중에서 가장 작은 RTT 값을 기준으로 하여 기준이 되는 순방향/역방향 전송 시간을 결정하고, 이 값과 각 패킷이 전송될 때 측정된 전송 시간을 비교하여 순방향/역방향 전송 지연 시간을 계산한다. 본 연구에서는 NS-2에서의 시뮬레이션과 실제 네트워크 상에의 측정을 통하여 제안된 방법의 올바른 동작을 확인하였다.

• 산업기술연구
• /
• 제27권B호
• /
• pp.235-243
• /
• 2007

Sensor network is used to obtain sensing data in various area. The interval to sense the events depends on the type of target application and the amounts of data generated by sensor nodes are not constant. Many applications exploit long sensing interval to enhance the life time of network but there are specific applications that requires very short interval to obtain fine-grained, high-precision sensing data. If the number of nodes in the network is increased and the interval to sense data is shortened, the amounts of generated data are greatly increased and this leads to increased amount of packets to transfer to the network. To transfer large amount of packets fast, it is necessary that the delay between successive packet transmissions should be minimized as possible. In Sensor network, since the Operating Systems are worked on the event driven, the Timer Event is used to transfer packets successively. However, since the transferring time of packet completely is varies very much, it is very hard to set appropriate interval. The longer the interval, the higher the delay and the shorter the delay, the larger the fail of transfer request. In this paper, we propose ESTEO which reduces the delay between successive packet transmissions by using SendDone Event which informs that a packet transmission has been completed.In ESTEO, the delay between successive packet transmissions is shortened very much since the transmission of next packet starts at the time when the transmission of previous packet has completed, irrespective of the transmission timee. Therefore ESTEO could provide high packet transmission rate given large amount of packets.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.40.1-40
• /
• 2001

In this paper, control theoretic approaches are proposed to guarantee QoS (Quality of Series) such as packet delay and packet loss of real-time traffic in high-speed communication network. Characteristics of variable rate real-time traÆc in communication networks are described. The mathematical model describing networks including source and destination nodes are suggested. By a traffic control mechanism, it is shown that worst-case end-to-end transfer delay of traffic can be controlled and packet loss can be prevented. The simulation shows results of delay control and buer level control to raise QoS in realtime traffic.

• 한국통신학회논문지
• /
• 제28권9A호
• /
• pp.684-693
• /
• 2003

본 논문에서는 시변 패킷 기반 무선 링크에서 메시지와 패킷의 전송 지연 시간을 분석하였다. 메시지는 베르누이(Bernoulli) 프로세스에 따라 도착하고 생성되는 메시지의 길이는 지수 분포를 가진다고 가정하였다. 또한 시간 변이성을 가지는 무선 링크의 특성을 반영하기 위하여 2-상태 마코프 모델을 사용하여 해석하였다. 이 마코프 모델로부터, 패킷의 도착율과 패킷 전송 서비스 시간, 무선 링크의 평균 PER(packet error rate)의 항으로 패킷의 평균 전송 지연 시간과 평균 큐 길이를 해석적으로 분석하였고, 이러한 패킷의 성능 지표들로부터 메시지의 전송지연 시간 및 큐 길이를 유도하였다. 수치적 결과로부터 시변 패킷 기반 무선 링크의 안정적 동작과 전송 성능을 보장하기 위해서는 PER에 따라 메시지 도착율 및 길이가 제한되어야 한다는 것을 알 수 있었다. 또한 성능에는 각 상태의 머무는 시간보다 PER의 영향이 큼을 알 수 있었다.