• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.61-69
• /
• 2020

As post-harvest processes of onions are carried by a 20 kg-net package which results in high-cost and low-efficiency, especially, the insufficient drying and physical damage of onions after harvesting leads to a huge second loss in storage, we had developed a low-cost, high-efficiency post-harvest bulk handling machinery system by collecting onions on a farm using ton-bags, drying with forced air circulation, and sorting/packaging. The post-harvest bulk handling machinery system consisted of 6 devices, and this study designed an automatic feed hopper with a feeding rate control device, an inclined belt conveyor with a two-step chute, and an automatic pallet unloading device for feeding onions into the sorting/packing line. This study also analyzed the performance and control of the total system. The device had 1-ton handling capacity, but the operational condition was set to increase the capacity. The three-step filling method of pallet by the velocity control of the inclined belt conveyor was applied in the post-harvest bulk handling machinery system for the prevention of physical damage. If one worker was set to operate the total system, the time required to complete one palletized load was approximately 5 minutes and 5 seconds. The calculated daily handling capacity was approximately 94 tons, when the daily actual working time was 8 hours. When the developed system was applied to the managerial size of 2,000 ton, the processing cost per ton of the system was decreased by 19.5%, compared with the existing 20 kg-net package-based handling. The developed post-harvest bulk handling machinery system would be a good substitute for the rapid decline and aging of rural labor.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.3
• /
• pp.418-429
• /
• 2012

In this study we surveyed the packaging preferences of consumers for Korean rice cakes as current commercial products in Korea. The questionnaire was developed from a preliminary investigation of typical rice cake packaging patterns and sent to 2332 residents in Korea by random sampling mail. The questionnaire contained questions on the preferences of interior design in packaging, opening methods, individually separated types, printing position, packaging methods, and packaging materials such as paper and plastic. There were responses from 304 residents. The collected data was analyzed by an SPSS package program. Most of the packaging used for Korean rice cakes was plastic (58.9%) which was used for packaging materials and stretch wrap (42.9%) as packing methods. The results showed the preference was the perforated line type used by hand for opening a packaging and interior packaging design with 2~3 partitions. Most respondents expressed an interest in using individual packaging and having printing directly on the packaging. Also, the respondents preferred the packaging design that let them see the contents of a package. Based on the results of the questionnaire, this paper suggested that most consumers would prefer to choose a packaging system with a partition design in a plastic container, individually separated products, and a transparent container for Korean rice cakes. The results of packaging preferences could provide important information for suitable packaging development for Korean rice cakes. Further research should be conducted to improve the shelf life of Korean rice cakes with functional packaging systems such as modified atmosphere packaging or anti-microbial packaging.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.1
• /
• pp.11-17
• /
• 2020

This study conducted a case study and a questionnaire analysis in parallel. In the case study, a study was conducted on domestic manufacturer A by analyzing pallet loading efficiency of RRP(Retail Ready Packaging) products and pallet loading efficiency of MWC(Membership Wholesale Club) delivered products. As a result of the pallet loading efficiency simulation of 50 RRP products of Manufacturer A, it was 80.0% based on the T-11 type pallet and 84.3% based on the T-12 type pallet. It was found It refers that the route of producing the product from the manufacturer A and delivering it to the MWC A in the form of RRP resulted in the decrease of the pallet loading efficiency through the change of the loading pattern and the adjustment of the number of loads. As a result of analyzing the questionnaire about whether the overall efficiency of the supply chain will be improved if the operation of the packaging system considering the SCM(Supply Chain Management) aspect is χ² = 178.500, there was a statistically significant difference at the significance level of 0.000. Manufacturers and logistics companies answered "yes" the most, but distributors answered "is average" the most, confirming that the packaging can be constructed with the highest operational efficiency. Therefore, as a result of confirming the impact of packaging design considering the SCM aspect on logistics efficiency, it indicates the importance of closer collaboration between manufacturers and distributors.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.11 no.1
• /
• pp.11-16
• /
• 2005

Fruits are subjected to complex dynamic stresses in the transportation environment. During a long journey form the production area to markets, there is always some degree of vibration present. Vibration inputs are transmitted from the vehicle through the packaging to the fruit. Inside, these cause sustained bouncing of fruits against each other and container wall. These steady state vibration input may cause serious fruit injury, and this damage is particularly severe whenever the fruit inside the package is free to bounce, and is vibrated at its resonance frequency. The determination of the resonant frequencies of the fruit may help the packaging designer to determine the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. The first frequency of the pear in packaged freight be stacked in resonance frequency band of the pear packaged freight was increased from the bottom to the top of the stack but the second frequency of that in resonance frequency band of the pear was decreased. This indicated that the high damage score of the pear in bottom tier in vibration test was due to higher acceleration level in resonance frequency band of the pear.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.79-84
• /
• 2016

A flexible electronic device deformed by external force causes the failure of a semiconductor die. Even without failure, the repeated elastic deformation changes carrier mobility in the channel and increases resistivity in the interconnection, which causes malfunction of the integrated circuits. Therefore it is desirable that a semiconductor die be placed on a neutral line where the mechanical stress is zero. In the present study, we investigated the effects of design factors on the position of neutral line by finite element analysis (FEA), and expected the possible failure behavior in a flexible face-down packaging system assuming flip-chip bonding of a silicon die. The thickness and material of the flexible substrate and the thickness of a silicon die were considered as design factors. The thickness of a flexible substrate was the most important factor for controlling the position of the neutral line. A three-dimensional FEA result showed that the von Mises stress higher than yield stress would be applied to copper bumps between a silicon die and a flexible substrate. Finally, we suggested a designing strategy for reducing the stress of a silicon die and copper bumps of a flexible face-down packaging system.

• Laser Solutions
• /
• v.9 no.3
• /
• pp.15-21
• /
• 2006

A Polypropylene (PP) film was ablated using a femtosecond laser with a center wavelength of 785 nm, a pulse width of 184 fs and a repetition rate of 1 kHz. Increments of both pulse energy and the shot number of pulses lead to co-occurrence of photochemical and thermal effect, demonstrated by the spatial expansion of rim on the surface of PP. The shapes of the laser-ablated PP films were imaged by a scanning electron microscope (SEM) and measured a 3D optical measurement system (NanoFocus). And, the oxygen transmission rate (ORT) of periodically laser-ablated PP film were characterized by oxygen permeability tester for modified atmosphere packaging (MAP) of fresh fruit and vegetable. Our results demonstrate that femtosecond pulsed laser is efficient tools for breathable packaging films in modifying the flow of air and gas into and out of a fresh produce container, where the micropatterns are specifically tailored in size, location and number which are easily controlled by laser pulse energy and pulse patterning system.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.1
• /
• pp.49-54
• /
• 2023

Recently, System in Packaging(SIP) technology needs to meet high frequency (5G and more) communication technology and fine pitch surface treatment. The conventional Electroless Ni/Immersion Au plating(ENIG) is not suitable for high frequency range because of magnetic properties are increasing the transmission loss. Without nickel plating layer, the pattern and pad reliability level must be meet the condition. In this review paper, we investigated research trends on Ni-less surface treatment technology for high-frequency communication and frequency characteristics according to materials.

• Journal of the Korean Society of Floral Art and Design
• /
• no.43
• /
• pp.81-100
• /
• 2020

Since sustainable packaging of flower basket designs that are sold from florist shops is needed for both the seller and the buyer, studying of second packaging of flower basket design has begun. In this study, based on the survey that has been done in 2019, and the analysis of the interview that has been done in 2020, the suggestion of sustainable packaging development is the purpose. The definition of flower basket design was done and surveys of the status of domestic flower basket designs' second packaging were done in accordance with the type of basket which is an object, transportation, and characteristic of a florist shop. For sustainable packaging, based on physical theory, second packaging which depends on the packaging that includes design factor, transportation final destination has to be different. The factors to be considered as sustainable packaging are the quality of opaque paper, the necessity of first packaging, packaging structure that can fix an object, the form of second packaging influenced by types of transportation. Suggestions for packaging development included new materials for first packaging, eco-friendly objects that can be recycled and reused, structural packaging design, standardization and variability of packaging, protection of floristry which is the fundamental purpose of packaging, and brand advertisement effect. Based on the result of this study further designs of packaging will be commercialized. This study is significant for serving the opportunity of new packaging design for futuristic floristry that fit for unmanned system and studying of categories of products.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.2
• /
• pp.59-64
• /
• 2019

In this paper, we introduced a near-infrared multi-channel fluorescence imaging system and analyzed the effects of measurements variables such as exposure time, working distance and intensity of excitation light. Fluorescence signal is increased as exposure time becomes longer, excitation light intensity increases or working distance becomes smaller. Furthermore, the proper composition of optical filters and precise packaging of the imaging modules prevent the increase of background signal. Thus, we confirmed an increase in SBR. Based on the result of this research, we proposed a method to use a multi-channel fluorescence imaging system.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.3
• /
• pp.37-41
• /
• 2014

In this work, we investigated the efficiency improvement of concave mirror based solar daylighting system that does not convert light to electricity. Total efficiency of the system is substantially affected by external environment and focusing position, alignment of reflectors, lenses. As a result of simulation, we obtained the max. efficiency in which depends on convex lens position.