• 한국포장학회지
• /
• 제10권1호
• /
• pp.27-36
• /
• 2004

Software summarized packaging technology related is needed for low cost and high efficiency in production and packaging design of corrugated board, and in development of these softwares, distribution and packaging environment of one's country must be reflected, well. In domestic occasion, software related to corrugated board packaging dont's exist nearly, and in many industrial fields, the more higher role and importance of packaging in various industrial field is, the more higher necessity of that is. In this study, on the base of preceeding studies (Park, 2001; 2003; 2003), software to optimize board combination that is most importance and sensitivity in composition of cost elements in production and packaging design of corrugated board was developed. This software was composed of input module, output module, database and management module, and calculation module, and efficiency of this software was analyzed on the both sides of sensitivity in design result and effectiveness in a case analyse. In the inward design results having same strength, board combination balance, bursting strength, box weight, and cost were greatly different. Therefore, optimum inward design according to user's design specifications is possible, and in a case analysis for actual products, obtained the more profitable results than before design.

• 월간포장계
• /
• 통권291호
• /
• pp.71-76
• /
• 2017

• 월간포장계
• /
• 통권296호
• /
• pp.73-76
• /
• 2017

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2001년도 Bulletin of The 5th Asian Design Conference International Symposium on Design Science
• /
• pp.51.1-51
• /
• 2001

• 마이크로전자및패키징학회지
• /
• 제9권1호
• /
• pp.43-48
• /
• 2002

Semiconductor chip encapsulation process is employed to protect the chip and to achieve optimal performance of the chip. Expert decision-making to obtain the appropriate package design or process conditions with high yields and high productivity is quite difficult. In this paper, an expert system for semiconductor chip encapsulation has been constructed which combines a knowledge-based system with CAE software.

• 한국포장학회지
• /
• 제6권1호
• /
• pp.12-18
• /
• 2000

If optimum design technique is applied in the design of packaging container for bulk materials, merits on the side of not only economic and compression performance but distribution efficiency are expected. In this study, on the ground of the optimum models for required board area and compression strength performance, optimum design program having faculties of outward and inward optimum design and information design was developed. This program was composed of input module, output module, database and management module, and calculation module. Though the packaging specifications ars same, requied board area, board composition and cost of container were greatly different according to exterior packaging conditions. Also, about 12% in weight of container was lighter, and about $13{\sim}17%$ in cost of container was reduced when the program was applied for 2 kinds of bulk materials.

• 한국포장학회지
• /
• 제6권1호
• /
• pp.1-11
• /
• 2000

In optimum design of packaging container for bulk materials, minimum board area, compression performance and distribution efficiency must be considered. In this study, mathematical models for minimum board area (RMA), compression strength (CS) and maximum compression strength per unit board area (MCSA) of container as algorithm for optimum design of packaging conatiner for bulk materials were developed as follows : RMA=f(V,D), ${\alpha}_{RMA}=f(V,D)$, MCSA=f(V,D), and ${\alpha}_{MCSA}=f(V,D)$. In order to develop these models, compression test according to various dimensions of container and response surface analysis for minimum board area, compression strength, and maximum compression strength per unit board area of container were carried out. In developed models, volume and depth of container were principal independent variables. Through the verified results for these models, optimum design of packaging container on the design conditions and limit conditions was possible. These models might be used in developing optimum design software of packaging container for bulk materials.

• 한국포장학회지
• /
• 제16권1호
• /
• pp.9-18
• /
• 2010

For screening test of the non-volatile compounds which migrate from food packaging materials into foodstuffs, the traditional high performance liquid chromatography (HPLC) systems suffer from the lack of universal detector with high sensitivity and universality and high efficiency HPLC separation column which provides complete separation of complex mixtures into all individual substances. In this work, the use possibility of online two-dimensional liquid chromatography (2D-LC) system coupled with a charged aerosol detector (CAD), a universal detector, was reviewed. 2D-LC system permits to improve peak capacity and resolving power for complex mixtures. Charged aerosol detector (CAD) offers a new feasibility for detection of any non-volatile compounds with high sensitivity and constant response factor in a calibration range. The combination of size exclusion chromatography (SEC) and normal phase HPLC (NP-HPLC) is most frequently used for the separation of the natural and synthetic polymers which are mainly used as raw materials for the manufacture of food packaging materials. However, there is no commercial software available for data acquisition and handling and therefore the quantification in 2D-LC analysis is still rare.

• ETRI Journal
• /
• 제25권6호
• /
• pp.423-436
• /
• 2003

This paper describes our design of a contents distribution framework that supports transparent distribution of digital contents on the Internet as well as copyright protection of participants in the contents distribution value chain. Copyright protection must ensure that participants in the distribution channel get the royalties due to them and that purchasers use the contents according to usage rules. It must also prevent illegal draining of digital contents. To design a contents distribution framework satisfying the above requirements, we first present four digital contents distribution models. On the basis of the suggested distribution models, we designed a contract system for distribution of royalties among participants in the contents distribution channel, a license mechanism for enforcement of contents usage to purchasers, and both a packaging mechanism and a secure client system for prevention of illegal draining of digital contents.

• Journal of Biosystems Engineering
• /
• 제24권3호
• /
• pp.267-274
• /
• 1999

An internet and network based software and related interface have been developed, which can remotely control and manage an on-site operating system. Developed software modules were composed of two parts: monitoring/management modules and control/diagnosis modules were developed for the network status, warehouse, production and selling status. Modules of control with diagnosis were developed for the on-site operating system and interface. Each module was integrated and the whole modules have been tested with an automatic mushroom grading/sorting system which was built in a laboratory. Developed software modules worked successfully without any uncommon situations such as system down caused by the software or data transfer error. Each software module was developed independently in order to apply easily to other existing on-site systems such as rice processing centers, fruit and vegetable sorting, packaging and distribution centers scattered over the country.