• Archives of design research
• /
• v.20
• /
• pp.13-22
• /
• 1997

The formation of design in Korea and the consensus on it's necessity began in 1960's. Industrial design started to be realistically recognized and formed with the establishment of The Korea Industrial & Packaging Design Center. Later on, the industrialization in 1970s has contributed to industrial design campaigns. Now industrial design in Korea shows almost 50-year-long history respectively, and the nation's GNP soars over $ 10, 000. This study focuses on the promotion of effective advances in graphic design, which is said to be most essential in the industry. For this, graphic designer's view on their occupation and the world with their anticipation towards further development of graphic design has been discussed.

• Journal of the Optical Society of Korea
• /
• v.12 no.1
• /
• pp.38-41
• /
• 2008

Precise micropatterning of polypropylene film, which is highly transparent in the wavelength range over 250 nm has been demonstrated by 355 nm nano/picosecond laser and 785 nm femtosecond laser. Increments of both the pulse energy and the shot number of pulses lead to cooccurrence of photochemical and thermal effects, demonstrated by the spatial expansion of rim on the surface of PP. The shapes of the laser-ablated polypropylene films were imaged by optical microscope and measured by a 3D optical measurement system. And, the ablation depth and width of polypropylene film ablated by femtosecond laser at various pulse energy and pulse number were characterized. Our results demonstrate that a femtosecond pulsed laser is an efficient tool for fabricating micropatterns of polypropylene films, where the micropatterns are specifically tailored in size, location and number easily controlled by laser processing conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.816-822
• /
• 2001

The thermoforming process is widely used in the plastics industry to produce articles for the packaging, automotive, domestic construction and leisure industries. The microcellular foaming process appeared at M.I.T. in 1980s to save a quantity of polymer materials and increase their mechanical properties. The glass transition temperature of polymer materials is one of many important process variables in appling the microcellular foaming process to the conventional thermoforming process. The goal of this research is to evaluate the relation between gas absorption and glass transition temperature in batch process using microcellular foaming process. The weight gain ratio of polymer materials has a conception of gas absorption. Polymers such as acrylonitrile-butadiene-styrene(ABS), polystyrene(PS) have been used in this experiment. According to conventional Chows model and Cha-Yoon model, it was estimated with real experimental result to predict a change of glass transition temperature as a function of the weight gain ratio of polymer materials in batch process to gain microcellular foamed plastic products.

• Journal of Distribution Science
• /
• v.17 no.9
• /
• pp.25-33
• /
• 2019

Purpose - The purpose of the study was to seek to find out what factors having differences between paid membership customers (Costco membership) and general customers in retail industry. Since Costco operates differently from other conventional retailers, which is expected to have a substantial impact on consumers' preference of retail stores. Research design, data, and methodology - The survey conducted covered 1,000 adults in their 30s~50s living in Goyang and Gwangmyeong where Costco runs stores to determine the effects of Costco's local market-entry from consumer perspectives. 500 respondents were surveyed in each region and those working in the retail sector were excluded to ensure the objectivity of the answers. Results - Costco members in Goyang considered the price, bulk purchasing, and membership benefits as important criteria when choosing their retail store. On the other hand, as for Gwangmyeong, the non-member group's prominent characteristic was that they considered accessibility including travel distance and location and in-store amenities including food court services as important criteria for decision-making. Conclusion - Unique business model of Costco shows a statistically significant difference in terms of consumer awareness. the feature of Costco served as an critical criteria for consumers in their purchasing decision. Moreover, Bulk packaging purchases at Costco results in a strong supplementary relationship with neighborhood supermarkets.

• Journal of Welding and Joining
• /
• v.31 no.3
• /
• pp.84-88
• /
• 2013

These days embedded technology may be the most significant development in the electronics industry. The study focused on the development of active device embedding using flexible printed circuit in view of process and materials. The authors fabricated 30um thickness Si chip without any crack, chipping defects with a dicing before grinding process. In order to embed chips into flexible PCB, the chip pads on a chip are connected to bonding pad on flexible PCB using an ACF film. After packaging, all sample were tested by the O/S test and carried out the reliability test. All samples passed environmental reliability test. In the future, this technology will be applied to the wearable electronics and flexible display in the variety of electronics product.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.2
• /
• pp.308-312
• /
• 2018

Even though chlorine dioxide ($ClO_2$) is utilized in a pre-treatment due to its effective sterilizing activity for microorganisms and its safety for food, it has a limitation in maintaining freshness of the food product. In this study, a low-concentration $ClO_2$ gas was produced in a packaging form of air-permeable gel pack so that it could be released continuously over several days. The amount of $ClO_2$ gas emission and microbial inactivation effect against foodborne pathogens were measured during the release of $ClO_2$ gas. As a result of measuring the change of color in order to confirm whether the chlorine dioxide gas was eluted in the form of a sustained release, the yellowness was significantly higher at higher gel pack concentration and higher value during storage periods. The slow-released $ClO_2$ gel-pack showed clear inactivation effect against Escherichia coli and Staphylococcus aureus with 99.9% inactivation efficiency. As a result of measuring the sterilization effect of Listeria monocytogenes by the concentration of chlorine dioxide gas, the sterilization effect was increased as the concentration was increased. Therefore, the slow-released $ClO_2$ gel-pack is feasible to apply for industry usages.

• Smart Structures and Systems
• /
• v.6 no.3
• /
• pp.309-333
• /
• 2010

Civil infrastructure, in both its construction and maintenance, represents the largest societal investment in this country, outside of the health care industry. Despite being the lifeline of US commerce, civil infrastructure has scarcely benefited from the latest sensor technological advances. Our future should focus on harnessing these technologies to enhance the robustness, longevity and economic viability of this vast, societal investment, in light of inherent uncertainties and their exposure to service and even extreme loadings. One of the principal means of insuring the robustness and longevity of infrastructure is to strategically deploy smart sensors in them. Therefore, the objective is to develop novel, durable, smart sensors that are especially applicable to major infrastructure and the facilities to validate their reliability and long-term functionality. In some cases, this implies the development of new sensing elements themselves, while in other cases involves innovative packaging and use of existing sensor technologies. In either case, a parallel focus will be the integration and networking of these smart sensing elements for reliable data acquisition, transmission, and fusion, within a decision-making framework targeting efficient management and maintenance of infrastructure systems. In this paper, prudent and viable sensor and health monitoring technologies have been developed and used in several large structural systems. Discussion will also include several practical bridge health monitoring applications including their design, construction, and operation of the systems.

• Korean Journal of Materials Research
• /
• v.19 no.3
• /
• pp.119-124
• /
• 2009

In the microelectronics packaging industry, the adhesion strength between Cu and polyimide and the thermal stability are very important factors, as they influence the performance and reliability of the device. The three different buffer layers of Cr, 50%Cr-50%Ni, and Ni were adopted in a Cu/buffer layer/polyimide system and compared in terms of their adhesion strength and thermal stability at a temperature of $300^{\circ}C$ for 24hrs. A 90-degree peel test and XPS analysis revealed that both the peel strength and thermal stability decreased in the order of the Cr, 50%Cr-50%Ni and Ni buffer layer. The XPS analysis revealed that Cu can diffuse through the thin Ni buffer layer ($200{\AA}$), resulting in a decrease in the adhesion strength when the Cu/buffer layer/polyimide multilayer is heat-treated at a temperature of $300^{\circ}C$ for 24hrs. In contrast, Cu did not diffuse through the Cr buffer layer under the same heat-treatment conditions.

• Journal of Fisheries and Marine Sciences Education
• /
• v.16 no.2
• /
• pp.210-217
• /
• 2004

Cooling technology has been a vital prerequisite for the rapid, if not explosive, growth of the electronic equipment industry. This has been especially true during the last 20 years with the advent of intergrated circuit chips and their applications in computers and related electronic products. The purpose of this study is to develop a telecommunication equipment cooling system using a thermoelectric module combined with cooling fan. Thermoelectric module is a device that can perform cooling only by input of electric power. In the present study, the cooling package using the thermoeletric module has been developed to improve the thermal performance. The cooling characteristics of the electronic chip was placed into the subrack and it can be rapidly assembled or disassembled in the equipment rack. As a preliminary experiment, the cooling performances between a conventional way using a cooling fin and a proposed method applying the thermoelectric module was comosed and analyzyed. The cooling performance at a simulated electronic component packaging a thermomodule operated well.

• YAKHAK HOEJI
• /
• v.44 no.5
• /
• pp.416-423
• /
• 2000

There is a growing concern that a wide variety of chemicals released into the environment can disrupt the endocrine system of fish, wildlife and humans. Endocrine disrupting chemicals (EDCs) include pesticides such as DDT lindane and atrazine, the food packaging chemicals, phthalates and bisphenol A, alkylphenol ethoxylate detergents and the chemical industry by-products, dioxins. Xenoestrogens in the environment have been argued about health risk, because of estrogen mimetic chemicals are exposed only small amounts to human. A number of in vivo and in vitro assays are now in use to assess the activity of xenoestrogens in the environment. A human breast cancer cell line (MCF-7) was used to develop in vitro screening assay for the detection of xenoestrogenic environmental pollutants. The E-SCREEN (MCF7-BUS) assay is proposed as a reliable, easy and rapid-to-perform method. To optimize and validate this method before it can be used routinely, several phenol compounds and pesticides suspected to be estrogenic were tested using I-SCREEN assay. The results showed that this method is a valuable tool for screening potential estrogen-mimicking environmental pollutants and quantitative determination of estrogeniciy.