• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.3
• /
• pp.95-102
• /
• 2016

This study investigated the effects of the oxygen permeability of vacuum packaging film and the storage temperature on the quality and shelf life of Hamburg steaks during storage for 14 days. Control samples (C) were packaged in a polyamide/polyethylene (PA/PE) film and stored at $5^{\circ}C$. Treatment samples were either packaged in an ethylene vinyl alcohol/polyethylene (EVOH/PE) copolymer film and stored at $5^{\circ}C$ (T1), and in a PA/PE film and stored at $-18^{\circ}C$ (T2). The initial total plate count (TPC) was 3.6 log cfu/g. In T1 samples, TPC and Brochothrix thermosphacta counts were increased, similar to those in C samples, whereas Pseudomonas spp. counts were significantly lower than those in C samples during storage. Over the storage period, the volatile basic nitrogen values increased most rapidly in C samples, followed by T1 and then T2 samples. The values of thiobarbituric acid reactive substances steadily increased in all samples during storage. The colour parameters were not significantly different among the samples during storage. T1 samples maintained sensory qualities in flavour and off-odour parameters for two days longer than C samples did. At day 12, T2 samples were evaluated as being below the marketability score of 5.0 for texture. In conclusion, using high oxygen barrier films like EVOH/PE copolymer for packaging Hamburg steaks could extend the sensory qualities in view of flavour and off-odour during chilled storage. However, frozen storage at $-18^{\circ}C$ is recommended when the storage period is extended beyond 14 days at $5^{\circ}C$.

• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.605-613
• /
• 2016

The quality and shelf life of sliced root of Platycodon grandiflorum (Doraji) treated by ozon-microbubble-heat shock (OMH) were investigated by combining modified-atmosphere packaging [MAP, ($50%O_2+15%CO_2+35%N_2$)]. The study was based on microbiological (total viable bacteria, fungi, Enterobacteriaceae and coliforms numbers), physicochemical and sensory changes. OMH treatment was effective in reducing microbial populations of the sliced Doraji, especially Enterobacteriaceae and coliforms reduced by 2 log CFU/g. However OMH-MAP treatment remained the aerobe and fungi numbers. Regarding the color, OMH-MAP delayed the change of Hunter $b^*$ and the sliced Doraji by OMH-MAP treatment exhibited lower decrease of flavor and overall acceptability compared to those by polypropylene packaging after tap water treatment (Control). The OMH and $50%O_2+15%CO_2$ MAP treatment gave better sensory quality and extended shelf-life for sliced Doraji (~3 days longer shelf-life than Control). Flavor was significantly related to overall acceptability at both Control and OMH-MAP, whereas total coliforms prevalence was associated with overall acceptability at only OMH-MAP. Therefore microbubble-heat shock treatment may improve microbial safety and sliced Doraji by OMH treatment can stored under $50%O_2+15%CO_2$ treatment for up to 7 days. Thus, OMH and MAP treatment may be used in maintaining the storage quality and marketability of sliced Doraji.

• Journal of Food Hygiene and Safety
• /
• v.33 no.4
• /
• pp.229-239
• /
• 2018

Currently, in Korea, a dry food simulant has not been designated for the migration testing of paper and board, food contact materials (FCMs) being used in dry foods, and foods heated at ultra-high temperature. Considering the diverse usage of FCMs, in order to secure reliable and confident safety evaluation and to overcome the non-trade barrier tariff in worldwide trade, migration testing methods of what should be more clearly defined for securing and overcoming. This article delves into the available literature on the use of $Tenax^{(R)}$ as a simulant for dry foods as well as its suitability and limitations, and examines the feasibility of its introduction into Korean FCMs regulation. Most experimental studies using $Tenax^{(R)}$ showed overestimated migration values when used in real foods, which reflects the potential of $Tenax^{(R)}$ as a dry food simulant in a worst-case scenario. However, more studies are required to optimize migration testing using $Tenax^{(R)}$ by standardizing the solvent type and the extraction method for surrogates of various FCMs and foods, and to resolve the potential drawbacks in the use of $Tenax^{(R)}$.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.85-96
• /
• 2007

In Korea, with a dramatic growth of Super Supermarket (SSM) in the wake of opening up the retail market and diversifying distribution, the consumer's purchase behavior about food and consumer goods changed. In order to investigate this change, this study was carried out through collecting and analyzing questionnaires from 190 men and women consumers at ages between twenties and sixties, living in Ulsan and Pusan. The result suggested that in overall features, men were mainly affected by design factors such as packaging design, color, and product design, whereas women were mainly affected by cost factors such as price and configuration. As for product properties, it was suggested that women put importance on the price concerning ail products, but men didn't. In addition, it was identified that women were impressed by advertisements on TV, and men and women both often purchased the product after confirming its information among the displayed products. Considering these results, we concluded that for a product whose main target is men in particular, the product development should focus on design. Moreover, as the packaging design and display affect on both men and women as important factors, hereafter a complementary study on the effects of the packaging design and display of manufacturers related to the products in this study is to be proceeded with greater interest.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.2
• /
• pp.21-33
• /
• 2013

In these days, agricultural products are regarded as a core income source in tourism villages. Nevertheless, poor packaging of agricultural products has threatened the competitiveness and quality of products. For farmers, it is less likely to employ individual designer for developing and improving their packages due to low accessability to rural villages and budgets. Based on this background, this study conducted 'Charrette' in order to improve agricultural product packaging. The target village was 'Goraday' in Gangwon province. This study consisted of different steps for building and implementing proper 'Charrette' programs. Then, it also conducted empirical investigation about the effectiveness and efficiency of 'Charrette'. 'Charrette' has made progress as follows; first step was concerned with advance preparation for constructing program. Second, implementation of 'Charratte' included data collection and analysis, and development of design. Third, evaluation and feedback stage have given presentation and discussion about suggested design with local residents. Empirical investigation about the effectiveness and efficiency of 'Charrette' has been composed with survey and interview targeting participants. In survey and interviews, designers were asked about their attitudinal changes in relation to knowledge, recognition, function, motivation, and satisfaction toward 'Charrette' and 'agricultural product package design' before and after participating the event. The results showed that knowledge and perception of designers toward 'agricultural product package design' have positively increased. In addition, it revealed that designers were satisfied with collaborations with others and their contribution to rural community business. However, the results also suggested that sufficient preparation time/schedules and opportunity to meet other and farmers before events would be required to have better communication and understanding in relation to their tasks and role distribution. Furthermore, it is also required for designers to hold relationship with local community in order to actualize their packaging design.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.2
• /
• pp.65-74
• /
• 2013

The through-silicon via (TSV) technology is essential for 3-dimensional integrated packaging. TSV technology, however, is still facing several reliability issues including interfacial delamination, crack generation and Cu protrusion. These reliability issues are attributed to themo-mechanical stress mainly caused by a large CTE mismatch between Cu via and surrounding Si. In this study, the thermo-mechanical reliability of copper TSV technology is investigated using numerical analysis. Finite element analysis (FEA) was conducted to analyze three dimensional distribution of the thermal stress and strain near the TSV and the silicon wafer. Several parametric studies were conducted, including the effect of via diameter, via-to-via spacing, and via density on TSV stress. In addition, effects of annealing temperature and via size on Cu protrusion were analyzed. To improve the reliability of the Cu TSV, small diameter via and less via density with proper via-to-via spacing were desirable. To reduce Cu protrusion, smaller via and lower fabrication temperature were recommended. These simulation results will help to understand the thermo-mechanical reliability issues, and provide the design guideline of TSV structure.

• Food Science of Animal Resources
• /
• v.31 no.5
• /
• pp.710-718
• /
• 2011

The effects of organic acids mix (0.4%) and modified atmosphere packaging (MAP) on the storage quality of sliced bacon were investigated. Pork bellies were treated with or without organic acids at the curing stage. The organic acids mix comprised 35% sodium acetate, 25% salt, 15% calcium lactate, 11% trisodium citrate, 7% ascorbate, and 7% citric acid. The cured pork bellies were smoked and packaged with 50% $CO_2$ + 50% $N_2$ (50% $CO_2$-MAP) and 100% $N_2$ (100% $N_2$-MAP), and stored at $5^{\circ}C$ for 14 d. The 50% $CO_2$-MAP showed a higher pH value (p<0.05) up to 10 d, a lower protein deterioration (p<0.05) as measured by volatile basic nitrogen (VBN) from 6 to 14 d, and a higher color value of lightness (CIE $L^*$) compared to 100% $N_2$-MAP. The development of lipid oxidation measured by thiobarbituric acid reactive substance (TBARS) values seemed to be effectively controlled throughout the storage period in both 50% $CO_2$-MAP and 100% $N_2$-MAP regardless of the application of organic acids. The 50% $CO_2$-MAP inhibited the growth of aerobic and anaerobic bacteria (p<0.05) both in non-added and bacon added with organic acids mix. The 50% $CO_2$-MAP alone seemed to be effective in delaying the growth of bacteria since the use of organic acids mix gave no additional effects. The addition of organic acids mix lowered the pH value (p<0.05), effectively retarded the protein deterioration (p<0.05), and showed a higher color value of lightness (CIE $L^*$) value (p<0.05) and lower color value of redness (CIE $a^*$) value (p<0.05). In conclusion, 50% $CO^2$-MAP showed better quality and self-life of sliced bacon during storage. However, the beneficial effect of organic acids mix was not noticed in the concentration used in this experiment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.621-628
• /
• 2002

Effect of the thickness of packaging film on the ripening of mature-green mume (Prunus mume Sieb. et Zucc) fruit was investigated by measuring physicochemical changes of the fruit during storage. Fruits were packaged using low density polyethylene (LDPE) films with thicknesses of 20, 30, and 40$\mu$m and stored at the room temperature. The physicochemical properties such as contents of various pectic substances, molecular weight distribution of soluble pectic substances, and surface image of the fruit were determined during storage of 8 days. In general, regardless of the thickness of the films applied, a content of water-soluble pectin (WSP) in the fruit was increased during storage, but both contents of HCI- soluble pectin (HSP), and Ca and Mg in total alcohol-insoluble solids were decreased. Sephacryl S-300 gel filtration study revealed that fractions of high molecular weight HSP and WSP decomposed into lower molecular weight pectins during storage. The scanning electronic microscope also identified a significant structural change of the fruit skin over the storage time. It could be concluded from the results that fruits packaged with LDPE 30${\mu}{\textrm}{m}$ film maintained the highest physicochemical quality of green mume fruit during storage.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.2
• /
• pp.43-50
• /
• 2009

Although thin PCBs(Printed Circuit Boards) have recently been required for high density interconnection, high electrical performance, and low manufacturing cost, the utilization of thin PCBs is severely limited by warpage and reliability issues. Warpage of the thin PCB leads to failure in solder-joints and chip. The $B^2it$(Buried Bump Interconnection Technology) for PCB has been developed to achieve a competitive manufacturing price. In this study, chip temperature, package warpage, chip stress and solder-joints stress characteristics of the PCB prepared with $B^2it$ process have been calculated using thermo-mechanical coupled analysis by the FEM(Finite Element Method). FEM computation was carried out with the variations in bump shapes and kinds of materials under 1.5W power of chip and constant convection heat transfer. The results show that chip temperature distribution reached more quickly steady-state status with PCB prepared with $B^2it$ process than PCB prepared with conventional via interconnection structure. Although $B^2it$ structures are effective on low package warpage and chip stress, with high strength bump materials arc disadvantage for low stress of solder-joints. Therefore, it is recommended that optimized bump shapes and materials in PCB design should be considered in terms of reliability characteristics in the packaging level.

• Journal of Distribution Science
• /
• v.14 no.2
• /
• pp.47-56
• /
• 2016

Purpose - The purpose of this study is to investigate the difference in the degree of significance and satisfaction perceived by college students and ordinary consumers on the HMR product attributes. Comparison of the difference on HMR product attributes between ordinary consumers and college students who belong to the current and future consumption groups of HMR will provide information for clear marketing strategies and PR on target consumers from the aspects of companies. Also, overall difference on HMR was investigated through IPA(importance-performance analysis) on significance and satisfaction with each product attribute. This result will provide information to food companies that produce or supply HMR products to be supplemented and improved. Finally, IPA was conducted between groups on product attribute to find which difference exists between groups. This result is also expected to provide crucial information to companies as suggested in the first purpose. Research design, data, and methodology - The procedure of analysis is as follows. First, independent sample t-test was conducted on the significance and satisfaction on HMR product attributes. Second, with using IPA, the significance and satisfaction on HMR product attributes of the respondents were checked to investigate marketing strategy direction on overall HRM products. Third, the difference between generations was verified using IPA on the college student and consumer groups. According to this result, the direction of marketing strategy on HRM products was to be proposed to food companies. Results - It was known that consumers consider HMR product attributes statistically and significantly such as nutrient content(nutrition), country of origin, brand, main raw material, packaging, and awareness of manufacturer. They keep after purchase more importantly than college students who considered only volume and price than consumers. In comparison with the difference in satisfaction on HMR product attributes, the college student group was more satisfied than ordinary consumers only in flavor, condition of food additives, and volume. Also, HMR related food companies must maintain taste, cooking method, manufacturing date, expiration date, and safety on current products continuously. Finally, as a result of analysis from the groups, the attributes such as cooking method, manufacturing date, expiration date, and safety were considered significantly with high achievement by the two groups. It was known that college students considered food texture to be important, but consumers considered storage method to be important after purchasing it. Conclusions - There is necessity to differentiate effectiveness of products when releasing HMR products subject to consumers and college students. The result will give great assistance to the improvement of companies, produce or supply HMR products. It will also provide entry strategies on target groups of companies that are planning for entry. The factors that consumers commonly considered not to be significant were brand, package form(appearance), cooking time, and sale(purchase) location, which were found in the comparison with the groups that awareness about manufacturers and storage method after purchase corresponded to college students and that distribution route corresponded to ordinary consumers.