• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.1 s.34
• /
• pp.77-85
• /
• 2005

Impedance spectroscopy was applied to low temperature polycrystalline Si in order to investigate the electrical/dielectric information in polycrystalline Si. By combined microstructure and impedance spectroscopy works, it was shown that the electrical information is sensitive to the corresponding microstructure, i.e., the grain size and distribution, judged from the capacitance vs. grain size relationship. At $360 mJ/cm^2$, the maximum in capacitance and the minimum in resistance correspond to the largest grain sizes of unimodal distribution in polycrystalline Si. The electrical/dielectric characterization is compared with Raman spectroscopic characterizations in terms of microstructure.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.219-226
• /
• 2005

When a ferroelectric film has an inhomogeneous distribution of charged defects, a voltage shift in the polarization curve is induced by the internal field generated in the film. The direction and the magnitude of voltage shift in the P-V hysteresis curves obtained by the Sawyer-Tower method are different from those obtained by the virtual ground method. In this study, the asymmetric behavior in the P-V hysteresis curves of inhomogeneous ferroelectric films was investigated with a physical model and the polarization curves obtained by the Sawyer-Tower and the virtual ground methods are compared.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.270-277
• /
• 2003

Thermal performance of flip chip bonding with Sn-3.5Ag solder ball was studied. The temperature distribution was measured with IR(InfraRed) camera of 25 urn resolution. The measurement shows that most of the samples had much higher maximum temperature than average temperature. With central heater and 2.5 (W), the difference between maximum and average temperature is over $80^{\circ}C$. The distribution was influenced by the location of heater, the distance from heater to flip chip bonding, and the passivation opening of solder bumps. To reduce the maximum temperature, the bigger passivation opening, the smaller chip size, and the closer location of heater to flip chip bumps are preferrable.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.198-202
• /
• 2002

$HfO_2$films were grown on Si substrate in the temperature range $250~550^{\circ}C$ using metal organic chemical vapor deposition (MOCVD) technique for a gate dielectric. Hafnium tart-butoxide and Oxygen gas were used as precursors and N2 was used as carrier gas. Impurity distribution and film structure(including interfacial layer) were studied at the deposition temperature range between 25$0^{\circ}C$ and $550^{\circ}C$. The growth rate and impurty distribution decreased with increasing temperature. The electrical properties of $HfO_2$were investigated with C-V, 1-V method and showed it has a good properties as a gate dielectric.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.1
• /
• pp.47-53
• /
• 2017

In this study we surveyed the preferences of consumer packaging for mini pot flower plants to improve the flower market application in Korea. The surveys were consisted of the consumers residing in Seoul metropolitan (221), Gyeonsang (70), Jeonla (29), Chungceong (19), Gangwon (7), other provinces (3). A total of 349 eligible respondents (male 173, female 176) were surveyed with a self-administered questionnaire asking on the general characteristics for residents, packaging material, packaging design, type of flower pot, degree of transparency, convenience, consumer's demand for packaging development, a significant point when purchasing the flower pot product. The collected date was analyzed using a chi-square (${\chi}^2$) statistical test in SPSS program. Most residents prefer for mini pot flower plants packed with packaging characteristics of plastic material (56.4%), packaging design of separated type (76.2%), angled type (62.5%), and transparency (48.6%). The other question results showed that major consumer's demand for mini pot flower plants is maintaining the freshness quality and stability structure for them. Transparency of packaging can also affect directly the preferences for purchasing the mini pot flower plants. The packaging structure with a proper shape design may protect the fresh mini pot flower plants from shock or any other damage during distribution. The results of this study help to provide consumer's demand for packaging development and to give the greatest advantages in terms of production and marketability of mini pot flower plants.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.985-996
• /
• 2021

While green packaging related concerns are mainly studied in developed countries, there is a lack of knowledge to observe purchase behavior toward green packaging in developing countries, especially in Vietnam. Buying green packaged products in FMCG is not required to trade-off between sustainability and product performance. Hence, this present research aims to understand the gap attitude - behavior existing on FMCG green packaged products among Vietnamese young consumers with psychosocial factors (environmental concern, environmental knowledge of green packaging and green trust) and contextual factors (availability of desired green packaging and product attributes). With a sample size of 396 respondents, data was collected by convenient sampling method and then was analyzed using structural equation modeling. The results reveal that all psychosocial factors are positive related to attitudes while purchase behavior is positively influenced. The findings also report that contextual factors have positive impacts on purchase behavior, which proves the important role of contextual factors in influencing consumer choices. It suggests that green packaging is receptive to Vietnamese young consumers but it should be considered within product-related context to enhance the difference in sustainability among similar FMCG products. Practical implications for marketers and future researches have also been discussed at the end of study.

• The Journal of Asian Finance, Economics and Business
• /
• v.10 no.2
• /
• pp.281-300
• /
• 2023

Recently, the call for better accountability and social responsibility from corporations has been regularly voiced, both in the academic literature and in public discussions. This poses a challenge to the existing literature in understanding consumption behaviors to direct them toward sustainable development. This study investigates the purchase intention of Gen Z consumers in Vietnam with green packaging products. Data were collected from 914 respondents by online questionnaire and then analyzed using OLS. The results suggest the significant influence of customers' income and packaging in driving customers' intention to use environmentally-friendly products. Specifically, consumers in a higher income class participate more actively in green purchases. However, problems associated with inadequate packaging are also illustrated, resulting in the poor perception of green messages and poor practice of ecological actions. Besides, subjective norms and green trust are found to be adversely related to green consumer intention. In addition, gender disparity in green behavior is reported, where female consumers show a higher tendency to ecological consumption than their male counterparts. Other demographic factors are also included in the model as control variables, which are age, education, price, environmental literacy, environmental concern, and psychological awareness, but they do not have a significant impact on green purchase intention.

• ETRI Journal
• /
• v.25 no.6
• /
• pp.423-436
• /
• 2003

This paper describes our design of a contents distribution framework that supports transparent distribution of digital contents on the Internet as well as copyright protection of participants in the contents distribution value chain. Copyright protection must ensure that participants in the distribution channel get the royalties due to them and that purchasers use the contents according to usage rules. It must also prevent illegal draining of digital contents. To design a contents distribution framework satisfying the above requirements, we first present four digital contents distribution models. On the basis of the suggested distribution models, we designed a contract system for distribution of royalties among participants in the contents distribution channel, a license mechanism for enforcement of contents usage to purchasers, and both a packaging mechanism and a secure client system for prevention of illegal draining of digital contents.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.6
• /
• pp.923-931
• /
• 2013

RFID (Radio Frequency Identification), which is a kind of the electronic tag, is a wireless access device using the radio frequency for recognizing the ID information. It has a variety of application such as the bus card, gate access card, distribution industry, and management of construction materials. The performance and size of RFID depend on the penetrability, recognition ratio, memory size, multi tag recognition, external pollution dust, and exterior impact, and RFID requires the packaging to protect itself considered above factors. Recently, RFID is diversely employed to effectively manage construction materials and the RFID packaging, which is robust to the external impact, is required to attach RFID on construction materials. In this paper, we propose the construction material RFID packaging designed to be robust for the external impact and to be practicable for change of the broken RFID. For the change of RFID, we separate the cast and body of the packaging. Also, we present the detail drawing for the proposed construction material RFID packaging and implement the performance evaluation of the packaging manufactured using 3D printer.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.13 no.1
• /
• pp.19-23
• /
• 2007

Shock and vibration inputs are transmitted from the transporting vehicle through the packaging to the fruit. The vibration causes sustained bouncing of fruits against each other and the container wall. The steady state vibration input may cause serous fruit injury, and the damage is particularly severe if the fruits are bounced at its resonance frequency. The determination of the resonance frequencies of the fruits and vegetables may help the packaging designer to determine the proper packaging system providing adequate protection for the fruits, and to understand the complex interaction between the components of the fruits when they relate to expected transportation vibration inputs. To analyze the vibration properties of the apples for optimum packaging design during transportation, random vibration tests were carried out. In the random vibration test, the resonance frequency and PSD of the packaged freight of apples in the test were in the range of 82 to 97 Hz and 0.0013 to $0.0021G^2/Hz$ respectively and the resonance frequency and PSD of the packaged apples in the test were in the range of 13 to 71 Hz and 0.0143 to $0.0923G^2/Hz$.