• Title/Summary/Keyword: pH stability

Search Result 2,387, Processing Time 0.03 seconds

Influence of Various Cyclodextrins on the Stability of Hydrocortisone 17-Butyrate in Aqueous Solution

  • Chun, In-Koo;Kim, Bo-Young
    • Archives of Pharmacal Research
    • /
    • v.15 no.2
    • /
    • pp.176-183
    • /
    • 1992
  • The stabilizing effects of $\alpha$-$\beta$-$\gamma$- and dimethyl-$\beta$-cyclodextrins $(\alpha$-, $\beta$-, $\gamma$- and DM-$\beta-$-CyDs) on the degradation of hydrocortisone 17-butyrate (HC-17B) in aqueous solution was investigated. Hc-17B underwent a facile hydroxide ion-catalyzed rearrangement to the less active 21-butyrate ester by the apparent first-order kinetics, and maximum stability of HC-17B was obtained at around pH 4.0. The stability of HC-17B was increased by inclusion complexation with $\alpha$-, $\gamma$- and DM-$\beta$-CyD in the pH range of 2.0-8.0 examined, whereas $\beta$-CyD accelerated the degradation of HC-17B at the pH higher than 5.0. The effects of ionic strength, solvent, temperature and CyD concentration were also investigated. Stability constants and apparent degradation rate constants of HC-17B-$\gamma$-CyD and HC-17B-DM-$\beta$-CyD complexes were determined kinetically on the basis of 1:1 complexation. The results suggested that the inclusion complexation with $\gamma$-CyD or DM-$\beta$-CyD was most useful means to enhance the stability of the steroid.

  • PDF

Surface Modification of Iron Oxide Particle by Silica-contained Materials (실리카계 물질에 의한 산화철 입자의 표면개질)

  • Ryu, Beyong-Hwan;Lee, Jung-Min;Koh, Jae-Cheon
    • Applied Chemistry for Engineering
    • /
    • v.8 no.5
    • /
    • pp.830-836
    • /
    • 1997
  • The surface modification of iron oxide particle produced from steel-pickled acid by sodium-contained materials was studied. The molar ratio of $SiO_2$ to $Na_2O$ of sodium silicate was 1, 2, 3.5, respectively. The dispersion stability of iron oxide suspension as functions of amount of silica and pH was evaluated by surface charge and sedimentation velocity of iron oxide particle. Then the amount of sodium silicate was determined to provide a dispersion stability of iron oxide particle above pH 7. Finally, the surface modification of iron oxide particle with sodium silicate as silica-contained materials was done by wet ball milling. In the results of study, the dispersion stability of silica modified iron oxide particle was largely depended on amount of silica and pH together. The untreated iron oxide was unstable at pH 8, i.e. isoelectric point, but, the surface modified iron oxide particle with 0.8wt% silica was stable above pH 5. The dispersion stability was enhanced with 0.2wt% of anionic polyelectrolyte.

  • PDF

Storage Stability of Anthocyanin Pigment Isolated from a Wasted Grape Peels (거봉(Black Olympia) 포도과피로부터 분리된 Anthocyanin색소지 저장안정성)

  • Hong, Joo-Heon;Chung, Hun-Sik;U, Hong;Youn, Kwang-Sup
    • Food Science and Preservation
    • /
    • v.9 no.3
    • /
    • pp.327-331
    • /
    • 2002
  • To develop the use of natural pigment for food, anthocyanins were isolated from grape peels which were wasted much in korea, and their characteristics were as fellows. pH has a marked influences on the color of the grape peels anthocyanin solution(GPAS). At low pH the color of GPAS was more stable than high pH. With increasing pH the color gradually fades as colorless pseudobases are formed. It showed characteristic bathnochromic shift as the solution increased. Among the sugars tested, glucose showed the most protective effect on the color of GPAS to raise the color stability, while fructose showed an adverse effect. Orgarnic acid such as citric acid prevented the degradation of anthocyanin, but ascorbic acid lowered stability of color considerably. The effect of light on GPAS was found to be very deleterious. The pigment degradation can be minimized by shielding the light from the pigment solution.

Fabrication and Its Biomedical Application of the pH-ISFET Microprobe (pH-ISFET 마이크로프로브의 製作과 그 生醫學的 應用)

  • Lee, Kwang-Man;Sohn, Byung-Ki
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.25 no.11
    • /
    • pp.1335-1341
    • /
    • 1988
  • A pH-ISEFET microprobe for in vivo measurements has been fabricated by combining ISFET (SL-IIS) chip and capillary thin film reference electrode. A two-step TCE oxidation for the gate oxide layer and multilayer encapsulation using silicone rubber and epoxy were specially used for the improvement of the stability and temperature dependence of the ISFET's. The measured sensitivit, response time and temperature dependence of the pH-ISFET microprobes are 50 mV/pH, less than one second, and - 0.01 pH/$^{\circ}$ , respectively. By operating continuously more than 40 days, a long term stability of 0.016 pH/day is obtained. The result of pH monitoring of femoral arterial blood in a rabbit is fairly good agreement with the value of blood gas analysis.

  • PDF

Effect of pH of Precipitation on Physical and Chemical Properties of Hydrous Aluninum Oxide (알루미나수화물(水和物)의 침전(沈澱)pH가 물성(物性)에 미치는 영향(影響))

  • Rhee, Gye-Ju
    • Journal of Pharmaceutical Investigation
    • /
    • v.6 no.2
    • /
    • pp.95-100
    • /
    • 1976
  • A study on the effect of the pH of precipitation on the acid consuming capacity, aging stability, physical and chemical properties of hydrous aluminum oxide prepared by the reaction of aluminum chloride and ammonium hydroxide solution was carried out by means of X-ray diffraction, IR spectra and differential thermal analysis. The results from these experiments are as follows: 1. Hydrous aluminum oxide precipitated at lower pH showed better acid consuming capacity, higher stability and more anion contained in the structure than that prepared at higher pH. 2. The hydrous aluminum oxide prepared at lower pH is amorphous and that prepared at higher pH is crystalline hydrated hydrous aluminum oxide, i.e., Bayerite and these results are conformed to Rhee's hypothesis. 3. The rate of loss of reactivity and the end-point reactivity are related to the pH of precipitation.

  • PDF

Effects of pH and Gamma Irradiation on the Physicochemical Properties of Corn Starch

  • Kang, Il-Jun;Chung, Cha-Kwon;Sohn, Jeong-In
    • Preventive Nutrition and Food Science
    • /
    • v.4 no.3
    • /
    • pp.175-179
    • /
    • 1999
  • To develop a production method for modified starches with less pollution, pH adjustment and gamma irradiation were applied to commerical corn starch. Blue values were significantly decreased , while alkali number, optical transmittance and solubility markedly increased when gamma irradiation was applied to pH 2 adjusted corn starch. Water binding capacity and swelling power at pH 5 were the highest among the samples. Gelatinization viscosity was considerably affected by gamma irradiation and pH of the starch. Gamma irradiation of pH 2 adjusted starch showed the lowest peak viscosity and the best cooling stability among the tested samples . Therefore, the production of modified starch with low viscosity as well as with sufficient viscosity stability seems feasible by controlling the pH of the starch and gamma irrdiation.

  • PDF

Temperature, organic solvent and pH stabilization of the neutral protease from Salinovibrio proteolyticus: significance of the structural calcium

  • Asghari, S. Mohsen;Khajeh, Khosro;Dalfard, Arastoo Badoei;Pazhang, Mohammad;Karbalaei-Heidari, Hamid Reza
    • BMB Reports
    • /
    • v.44 no.10
    • /
    • pp.665-668
    • /
    • 2011
  • In order to clarify the impact of Ca-binding sites (Ca1 and 2) on the conformational stability of neutral proteases (NPs), we have analyzed the thermal, pH and organic solvent stability of a NP variant, V189P/A195E/G203D/A268E (Q-mutant), from Salinovibrio proteolyticus. This mutant has shown to bind calcium more tightly than the wild-type (WT) at Ca1 and to possess Ca2. Q-mutant was resisted against autolysis, thermoinactivation and pH denaturation in a Ca-dependent manner and exhibited better activity in organic solvents compared to the WT enzyme. These results imply that Ca1 and Ca2 are important for the conformational stability of NPs.

Effect of pH on the Stability of Green tea Catechins (녹차 카테킨류의 pH에 대한 안정성 연구)

  • 박영현;원은경;손동주
    • Journal of Food Hygiene and Safety
    • /
    • v.17 no.3
    • /
    • pp.117-123
    • /
    • 2002
  • The five main green tea catechin components such as (+)-catechin, (-)-epicatechin, (-)-epigallocatechin, (-)-epicatechin gallate, and (-)-epigallocatechin gallate were analyzed quantitatively from commercial green tea by HPLC. Amounts of catechins decreased in the following order : (+)-catechin > (-)-epigallocatechin gallate >(-)-epigallocatechin >(-)-epicatechin >(-)-epicatechin gallate. In this study, the stability of the following green tea catechins to pH in the range from 3 to 11 was studied using of ultraviolet spectroscopy : (+)-catechin, (-)-epicatechin, (-)-epicatechin gallate, and (-)-epigallocatechin gallate. This study demonstrated that green tea catechins were not stable at high pH and that the pH-, and time-dependent spectral alternatives were not reversible In conclusion, low pH is important to maintain the efficient utilization of green tea catechins.

Effects of pH and Natural Polysaccharide Gums on the Foam Stability of Soy Protein Isolate (pH와 천연 다당류 고무질이 분리대두단백질의 거품안정성에 미치는 영향)

  • Yang, Seung-Taek;Kim, Mi-Sook;Park, Chun-Og
    • Korean Journal of Food Science and Technology
    • /
    • v.24 no.5
    • /
    • pp.482-491
    • /
    • 1992
  • Experiments were conducted to elucidate the effects of pH change and sodium alginate, gum karaya and gum arabic on the foaming properties of soy protein isolate (SPI). The surface tensions of SPI solution (5%) adding to gums at pH 4.0 and 5.0, near the isoelectric point (pH 4.5) were higher than those at pH 7.0 and 8.0. Specific viscosity of the solutions adding to gums (0.1, 0.2 and 0.3%) at pH 7.0 and 8.0 were $3.6{\sim}51.8$ and $4.0{\sim}51.2$, respectively. In cases of addition of sodium alginates specific viscosity were predominantly increased, while those of gum arabic did not almost increase. Addition of gums reduced the overrun, but it stabilized the foams, especially those of sodium alginates (0.2%) increased the foam stability at pH 5.0, 7.0 and 8.0 by 57, 413 and 315%, respectively. Foaming ability, foam stability and heat stability of the foam were significantly (p<0.05) affected by changing pH. There was a tendency to increase the foaming ability according to the decrease of surface tension. Specific viscosity was also important in foam stability and heat stability.

  • PDF

Stability of the Pigments from Monascus purpuresu CBS 281.34 (Monascus purpureus CBS 281.34가 생성하는 홍국 색소의 안정성)

  • 임성일;곽은정
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.33 no.4
    • /
    • pp.711-715
    • /
    • 2004
  • The stability of 80% ethanol-soluble pigments from Monasus purpureus CBS 281.34 was investigated according to storage temperature, pH and addition of organic acid. Also, the stability of ethanol-soluble pigment in aqueous system was examined after the addition of distilled water in the range of 0∼80% during the storage at 1$0^{\circ}C$ and 2$0^{\circ}C$ for 4 weeks with water soluble pigment. The heat stability was the highest (9.74%) when the 80% ethanol-soluble pigments were stored at 1$0^{\circ}C$ for 4 weeks. However, the 80% ethanol-soluble pigments stored at 6$0^{\circ}C$ and 8$0^{\circ}C$ for 24 h and 12 h greatly decreased by 23.06% and 30.36%, respectively. Although the 80% ethanol-soluble pigments were stable in the range of pH 4∼8, the degradation rate of pigment increased at pH 2 and PH 10.80% ethanol extract was adjusted to PH 4 by adding organic acids. The rate of pigment degradation was not different from control for 4 weeks. Red pigment was stable in the treatment of organic acids. And the stability of ethanol-soluble pigment in aqueous system was gradually decreased as the pigment content and storage time increased. Additionally, the stability of ethanol-soluble pigment was higher at 1$0^{\circ}C$ than at 2$0^{\circ}C$.