• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.27-39
• /
• 2012

This paper presented the strength and environmental characteristics of reclaimed-ground filled with controlled low-strength materials (CLSM) made of coal ash, small amounts of cement, and water in a reclamation site and evaluated the possibility of the use of coal ash on reclamation materials for beneficial use. Three-month period of SPT, CPT, environmental effects evaluation etc. were conducted. N values and cone resistances in ground filled with CLSM were greater than or similar to those in dredging sand. In case of land filled with coal ash except cement these values were lower than those in dredging sand. The results of soil and seawater pollution were lower than test criteria without high pH. Also the values of PH test were measured between pH 5.0~9.0, the criteria of industrial water in the Law for the Underground Water of Korea.

• Journal of Environmental Health Sciences
• /
• v.13 no.1
• /
• pp.35-40
• /
• 1987

Personal computer based measurement and control system was constructed and tested in order to fiexibly apply it to laboratoy experiments in which environmental factors such as temperature, humidity, pH, DO and gases should be measured and controlled. Personal computer FC-80 was successively interfaced to the input-output system made up of PPI, A/D converter, D/A converter, programmable timer and USART boards. To test the system, pH control experiment was executed and the pH of the solution could be measured, expressed on the monitor and controlled at constant value.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.33.1-33.1
• /
• 2018

pH is expressed mathematically as $pH=-{\log}[H^+]$, is a measure of the hydrogen ion concentration, [$H^+$] to specify the acidity or basicity of an aqueous solution. The pH scale usually ranges from 0 to 14. Every aqueous solution can be measured to determine its pH value. The pH values below 7.0 express the acidity, above 7.0 are alkalinity and pH 7.0 is a neutral solution. The solution pH can be determined by indicator or by measurement using pH sensor, which measuring the voltage generated between a glass electrode and a reference electrode according to the Nernst Equation. The pH value of solutions depends on the temperature and the activity of contained ions. In nickel electroless plating process, the controlled pH value in some limited ranges are extremely important to achieve optimal deposition rate, phosphorus content as well as solution stability. Basically, nickel electroless plating solution contains of $Ni^{2+}ions$, reducing agent, buffer and complexing agents. The plating processes are normally carried out at $82-92^{\circ}C$. However, the change of its pH values with temperatures does not follow any rule. Thus, the purpose of study is to understand the relationship between pH and temperature of some based solutions and electroless nickel plating solutions. The change of pH with changing temperatures is explained by view of the thermal dynamic and the practical measurements.

• KSBB Journal
• /
• v.15 no.5
• /
• pp.507-513
• /
• 2000

The biosynthesis of lovastatin, a cholesterol lowering agent formed by the filamentous fungus Aspergillus terreus, was examined in a 2.5 L jar fermenter. In batch bioreactor cultures conducted at various agitation rates, 400 rpm showed the best result in terms of lovastatin production. Notably, the effect of pH on lovastatin biosynthesis was found to be significant: when the pH was controlled at around 5.8 during the whole fermentation period, lovastatin concentration reached 598 mg/L, which is much hihger than the amounts obtained by pH-uncontrolled and pH 7.4-controlled fermentations. In addition, both L-histidine and L-tryptophan were observed to be favorable amino acids for the enhancement of lovastatin production when 6 g/L of the respective amino acids were supplemented at the beginning of the fermentation period. By further optimization of the production media and the physical environment, lovastatin production was increased to 836 mg/L (3.5 mg/L/hr) which is approximately 10 times higher than the productivity of the basic control culture.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.161-169
• /
• 2023

In this study, we prepared naproxen (NP) imprinted biodegradable polymer based multi-layer biomaterials using allbanggae starch (ABS), polyvinyl alcohol (PVA), and alginic acid (SA), and investigated their physicochemical properties and the controlled drug release effects. In addition, the prepared multi-layer biomaterials were characterized by FE-SEM and FT-IR. In order to confirm the controlled drug release effect for the transdermal drug delivery system (TDDS), the NP release properties of NP imprinted multi-layer biomaterials were investigated using various pH buffer solutions and artificial skin at 36.5 ℃. The results of NP release in various pH buffer solutions indicated that the NP release at high pH was about 1.3 times faster than that at low pH. In addition, NP release in multi-layer biomaterials was about 4.0 times slower than that in single-layer biomaterials. It was confirmed that the NP release rate in triple-layer biomaterials was 4.0 times slower than that in single-layer biomaterials while using artificial skin. Also, it could be found that NP in double-layer biomaterials and triple-layer biomaterials was released sustainably for 12 h. The NP release mechanism in pH buffer solutions followed the Fickian diffusion mechanism, but followed the non-Fickian diffusion mechanism with artificial skin.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.404-408
• /
• 2003

In this study, we examined the influences of pH and total concentration on the speciation of heavy metals (Cd, Cu, Zn) in acid mine drainage. Their labile concentrations were analyzed by Anodic Stripping Voltammetry (ASV) at both natural pH and adjusted pHs (from 2 to 8). We obtained regression equations for predicting labile concentrations as a function of the water pH and contamination level (total dissolved metal concentration). Our data show that labile Cu depends on both the total concentration and pH, while labile Cd and Zn concentrations are controlled mainly by their total concentration rather than pH. Therefore, the pH variation of AMD may significantly change the toxicity and bioavailability especially of Cu, owing to its speciation change.

• KSBB Journal
• /
• v.29 no.6
• /
• pp.426-431
• /
• 2014

pH controlled batch reactor and bubble column reactors have been developed in this research. They were used to produce high concentration of GABA and to determine optimal pH for GABA production. Glutamate decarboxylase (GAD) was isolated from recombinant E. coli and used for GABA production from monosodium glutamate (MSG). pH control was inevitable because the pH increased with MSG consumption. GAD showed highest activity at acidic conditions at pH 5.5 but the optimal pH for GABA production was pH 6.0. When 1.5 mole of MSG was used as reactant, the 1.05 mole of GABA was produced after 10 hrs batch reaction. Using bubble column reactors, 80 % of MSG was converted to GABA for 6 hrs reaction and 1.2 mole of GABA was produced.

• YAKHAK HOEJI
• /
• v.33 no.6
• /
• pp.372-376
• /
• 1989

Equilibrium swelling and pH-sensitivity of a polyelectrolyte copolymer hydrogel were controlled by employing copolymers with different hydrophilic-hydrophobic balances. Model pH-sensitive hydrogels, e.g., poly(methacrylic acid), poly(methacrylic acid-co-acrylamide), poly(methacrylic acid-co-2-hydroxyethylmethacrylate), poly(methacrylic acid-co-styrene) were synthesized at various monomer compositions. As hydrophobicity of the copolymer hydrogels increased, the equilibrium swelling decreased while the pH-sensitivity increased. In the case of poly(methacrylic acid-co-acrylamide), polymer-polymer interaction significantly affected the equilibrium swelling and provided a wide range control of pH-sensitivity.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.1
• /
• pp.19-26
• /
• 1993

The purpose of this paper is to explore the possible applicability of alginate beads as an oral controlled release system of polymeric drugs. Cellulase was used as a model polymeric drug. The release of cellulase from alginate beads was moderately affected by the ratio of cellulase to sodium alginate and strongly affected by $CaCl_2$ concentration. However, the release was not particularly affected by the other factors such as sodium alginate concentration and curing time. The drug was not released from alginate beads at pH 1.2, but was released continuously up to 8 hr at pH 6.8. At pH 6.8, the beads were swollen highly up to 3 hr, thereafter, were eroded into the bulk solution up to 6 hr, completely. Drug release from the beads can be caused due to diffusion and erosion of the matrix. Activity of cellulase was reduced when alginate beads containing cellulase were stored in simulated gastric juice. Further investigation would be necessary to improve the acid resistance of the beads. Since the release of cellulase as a model polymeric drug could be controlled by the regulation of the preparation conditions of alginate beads, the alginate beads may be used for a potential oral controlled release system of such polymeric drugs as polypeptide drugs.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3818-3821
• /
• 2010