• Title/Summary/Keyword: pH agent

Search Result 1,342, Processing Time 0.026 seconds

Protective effect of Ginseng Petroleum Ether Extract Against Lipid Peroxidation and Oxidative DNA Damage (인삼지용성성분의 지질과산화 및 산화적 DNA손상에 대한 억제효과)

  • 허문영
    • Journal of Food Hygiene and Safety
    • /
    • v.12 no.4
    • /
    • pp.315-320
    • /
    • 1997
  • Panax ginseng C.A. Meyer has been extensively used in the traditional oriental medicine as a restorative, tonic and prophylatic agent. This study was devised to develop a chemopreventive agent from panax ginseng to be able to suppress the genotoxicity and oxidative damage by ractive oxygen species, which are involved with cancer or aging. Ginseng petroleum ether extract (GPE) and one of its fraction, P2, showed an antioxidative effect on the lipid peroxidiphenyl-2-picryl hydrazil (DppH) radical generation. They also showed the suppressive effect of H2O2 or KO2 induced DNA damage by single cell gel electrophoresis (SCGE). Results from our study indicate that GPE and P2 are capable of protecting lipid peroxidation, and oxidative DNA damage. Therefore, GPE and P2 may be useful chempreventive agents which are involved with cancer and aging.

  • PDF

Anti-Foaming Properties of Polypropylene Glycol Oleates (올레산 폴리프로필렌글리콜 에스테르류의 소포특성)

  • Li, Hai-Yan;Choi, Hyoung-Chul;Jeong, Noh-Hee
    • Journal of the Korean Applied Science and Technology
    • /
    • v.28 no.2
    • /
    • pp.146-151
    • /
    • 2011
  • In this study, by using oleic acid and polypropylene glycol, good natured antifoaming agent for suitable electronics process under the alkaline conditions were synthesized. For the synthesized mono and diesters, acid value, hydroxyl value was measured, and identified by FT-IR and $^1H-NMR$ spectroscopy. Surface properties such as surface tension, critical micelle concentration(cmc) for diluted aqueous solution was measured, and tested the antifoaming properties according to the difference of alkyl chain length, various concentration, temperature and pH. The surface tension of synthesized antifoaming agent, PPMO(Polypropylene glycol monooleate) was 24.3 dyne/cm, PPDO(Polypropylene glycol dioleate) was 23.7 dyne/cm. By increasing of the alkyl chain length, surface tension was decreased slightly, and showed good antifoaming properties at 0.06 wt% concentration and $50^{\circ}C$, pH 11. These synthesized compounds are expected to apply as a suitable antifoaming agents in the semiconductor and the PCB(Printed Circuit Board) manufacturing process.

Studies on the Stabilities of Insectcides Combined with some Stabilizers (살충제제(殺蟲製劑)의 안정성(安定性)에 관(關)한 연구(硏究))

  • Woo, Chong-Hak;Kim, Jae-Wan
    • Journal of Pharmaceutical Investigation
    • /
    • v.1 no.1
    • /
    • pp.101-108
    • /
    • 1971
  • The stability and toxicity test for p.p'-DDT, DDVP and dipterex that put to used sample in this study effects is follows A. about p.p'-DDT (1) In elevating the stability of p.p'-DDT, best stabilizing solvent was benzene. (2) The stability-agent has no difficulty as long as it not contain metal ion for instance $Z_n^{2+}$,$C_r^{3+}$,$Al^{3+}$,and $Fe^{2+or3+}$ but in case of contain $F_e^{3+}$, the combination of salicylaminoguanidine is best effective. (3) Using this product for water-suspension, We must use span 40 for stability agent and adding it at the same time. (4) We must use container which does not week alkali and metal ion but it is to preserved in tight light-resistant container. (5) The stopper of container is adapted with above-mentioned condition of container, but it is better not to use metal material. (6) This product needs opening ventilation more than 30 minutes after diffusion or spray and in the room we remove cause of remained poison by cleaning the bottom. B. about DDVP and Dipterex (1) Benzene or toluene in best solvent to preserve stability of DDVP and Dipterex. (2) Span 40 is superior for stability agent of this product and second is span 80. (3) The pH of solution is very stable in pH 5-6 and comparative stable in alkali more than p,p'-DDT. (4) Container is to preserved in tight, lightresistant container and especially be careful of outflow and inflow of water. (5) Because this product is centeral stimulant poison, we must pay attention to prevent cause of contact diadermic toxicity after use.

  • PDF

Engineering characteristics and field demonstrations of solidified sludges (고형화 슬러지의 공학적 특성 및 현장적용성 분석)

  • 고용국
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2003.03a
    • /
    • pp.593-596
    • /
    • 2003
  • The special amendment agent used in this study is mainly composed of inorganic metal salts such as sodium chloride, magnesium chloride, potassium chloride, calcium chloride, thus is friendly to the environment, and has a function of soil-cement-agent solidification. In this study, a series of laboratory and field experiments including unconfined compressive strength, permeability, pH test, constituent analysis, leaching test were carried out to analyse engineering and environmental characteristics of solidified sludge. The results of this research showed that the solidified sludge could be efficiently used in covering, filling, and planting materials.

  • PDF

Characterization of Endolysin LysECP26 Derived from rV5-Like Phage vB_EcoM-ECP26 for Inactivation of Escherichia coli O157:H7

  • Park, Do-Won;Park, Jong-Hyun
    • Journal of Microbiology and Biotechnology
    • /
    • v.30 no.10
    • /
    • pp.1552-1558
    • /
    • 2020
  • With an increase in the consumption of non-heated fresh food, foodborne shiga toxin-producing Escherichia coli (STEC) has emerged as one of the most problematic pathogens worldwide. Endolysin, a bacteriophage-derived lysis protein, is able to lyse the target bacteria without any special resistance, and thus has been garnering interest as a powerful antimicrobial agent. In this study, rV5-like phage endolysin targeting E. coli O157:H7, named as LysECP26, was identified and purified. This endolysin had a lysozyme-like catalytic domain, but differed markedly from the sequence of lambda phage endolysin. LysECP26 exhibited strong activity with a broad lytic spectrum against various gram-negative strains (29/29) and was relatively stable at a broad temperature range (4℃-55℃). The optimum temperature and pH ranges of LysECP26 were identified at 37℃-42℃ and pH 7-8, respectively. NaCl supplementation did not affect the lytic activity. Although LysECP26 was limited in that it could not pass the outer membrane, E. coli O157: H7 could be effectively controlled by adding ethylenediaminetetraacetic acid (EDTA) and citric acid (1.44 and 1.14 log CFU/ml) within 30 min. Therefore, LysECP26 may serve as an effective biocontrol agent for gram-negative pathogens, including E. coli O157:H7.

콘크리트 재생 골재를 이용한 산성광산배수 중화처리

  • 김종범;오재일;정시열
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2001.09a
    • /
    • pp.71-74
    • /
    • 2001
  • AMB(Acid Mine Drainage), characterized as high concentration of metal & sulfate ions and low pH(2.0~4.0), is the world-wide problem wherever there is or has been mining activities. Though limestone has been generally used to neutralize AMD, There are metal hydroxide precipitation on the surface of limestone and excessive alkalinity formation which exceeds the regulation. In this research, concrete-recycled fine aggregate is selected for alternative neutralizing agent. Because fine recycled aggregate had more ANP than others in the preliminary research, the purpose of this research is to apply fine aggregate for AMD neutralization. Three columns packed with fine aggregates(2.5mm$O_3$) of it is calculated as 0.09(C-1), approximated 10% purity of limestone. Comparing with values of other columns(C-2: 0.01 and C-3: 0.01), there is variation of porosity and residence time induced from the precipitation of metal hydroxide. Consequently, 8 hours of HRT is enough to create adequate alkalinity and the function which could expect the variation of porosity(n) and residence time( $t_{R}$) should be applied to develop design function.lied to develop design function.

  • PDF

Electroless Plating of Co-P Magnetic Films from Pyrophosphate Bath (피로인산염욕으로부터 Co-P자성막의 무전해 도금)

  • Jo Jung-San;Koh, Suck-Soo;Lee, Ju-Seong
    • Journal of the Korean institute of surface engineering
    • /
    • v.19 no.4
    • /
    • pp.140-148
    • /
    • 1986
  • Using sodium pyrophoshate as complexing agent, the characteristics and the magnetic properties of the films deposited from electroless cobalt plating bath have been studied. The result obtained are as following; 1. It was found that the optimum bath compositions consisted of 0.1M cobalt sulfate, 0.2M sodium hypophosphite as reducing agent, 0.4M sodium pyrophosphate as complexing agent and 0.5M ammonium sulfate as buffer agent, whereas good operating conditions were the bath of pH 10.5 adjusted with ammonia and 70$^{\circ}C$ of bath temperature, respectively. 2. The coercive force and the squareness of magnetic films were increased with deposition from the low temperature bath. 3. The phosphorous content in Co-P films deposited from these bath was relatively higher than that from Brenner bath. It was assumed to be due to codeposition of phosphorous from the pyrophosphate anion in the solution.

  • PDF

Stability of Oxidizer $H_2O_2$ for Copper CMP Slurry (구리 CMP 슬러리를 위한 산화제 $H_2O_2$의 안정성)

  • Lee, Do-Won;Kim, In-Pyo;Kim, Nam-Hoon;Kim, Sang-Yong;Seo, Yong-Jin;Chang, Eui-Goo
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2003.07a
    • /
    • pp.382-385
    • /
    • 2003
  • Chemical mechanical polishing(CMP) is an essential process in the production of copper-based chips. On this work, the stability of Hydrogen Peroxide($H_2O_2$) as oxidizer of Cu CMP slurry has been investigated. $H_2O_2$ is known as the most common oxidizer in Cu CMP slurry. Copper slowly dissolves in $H_2O_2$ solutions and the interaction of $H_2O_2$ with copper surface had been studied in the literature. Because hydrogen peroxide is a weak acid in aqueous solutions, a passivation-type slurry chemistry could be achieved only with pH buffered solution.[1] Moreover, $H_2O_2$ is so unstable that its stabilization is needed using as oxidizer. As adding KOH as pH buffering agent, stability of $H_2O_2$ decreased. However, stability went up with putting in small amount of BTA as film forming agent. There was no difference of $H_2O_2$ stability between KOH and TMAH at same pH. On the other hand, $H_2O_2$ dispersion of TMAH is lower than that of KOH. Furthermore, adding $H_2O_2$ in slurry in advance of bead milling lead to better stability than adding after bead milling. Generally, various solutions of phosphoric acids result in a higher stability. Using Alumina C as abrasive was good at stabilizing for $H_2O_2$; moreover, better stability was gotten by adding $H_3PO_4$.

  • PDF

Antigenotoxicity of Galangin and its Action Mechanism (Galangin의 유전독성 억제효과와 작용기전)

  • 허문영;류재천
    • Environmental Mutagens and Carcinogens
    • /
    • v.18 no.2
    • /
    • pp.77-82
    • /
    • 1998
  • In order to compare the suppressive effect of galangin on the genotoxicity by N-methyl-N-nitrosourea (MNU) or benzo[a]pyrene B(a)P, in vivo micronycleus test using mouse peripheral blood and in vitro sister chromatid exchange(SCE) test using mouse spleen lymphocytes were performed. MNU or B(a)P-induced micronucleated reticulocytes in vivo was decreased by the simultaneous treatment of galangin. MNU or B(a)P-induced SCEs in vitro was also decreased by the simultaneous treatment of galangin. On the other hand, the determinations of [$^3$H]MNU-induced total DNA binding and methylated DNA were performed to find out the mechanism of action. [$^3$H]MNU-induced total DNA binding was inhibited by the treatment of galangin in calf thymus DNA. HPLC analysis of DNA hydrolysates showed that galangin caused a decrease of 7-methyl guanine and $O^{6}$-methyl guanine in calf thymus DNA. To elucidate the action mechanism of galangin against B(a)P, alteration of B(a)P metabolism was studied. Galangin inhibited B(a)P metabolism in the presence of S-9 mix and decreased B(a)P-DNA binding in calf thymus DNA with S-9 mix.

  • PDF

Effect of Plating Condition and Plating Rate on the Magnetic Properties of Electroless Co-Cu-P Deposits (무전해 Co-Cu-P 도금층의 자성에 미치는 도금조건과 도금속도의 영향)

  • Oh, I.S.;Park, S.D.
    • Journal of Power System Engineering
    • /
    • v.8 no.3
    • /
    • pp.36-43
    • /
    • 2004
  • The effect of bath composition, plating condition and plating rate on the magnetic property of electroless Co-Cu-P deposits were investigated. With increasing $CuCl_2$ concentration in the bath, plating rate increased, while the Br value of deposit decreased sharply. Deposited surface were inferiority by the increase pH above 10.5, bath temperature higher than $80^{\circ}C$. Plating reaction had been ceased by the increase of pH above 11, bath temperature higher than $90^{\circ}C$ and under $40^{\circ}C$. The Br value of deposit was uniform with various concentration of complexing agent(sodium citrate) in the bath. The Br value of deposit was almost equal to that found by the addition of stabilizer (thiourea) and accelerator(NaF). The Br value of deposit was uniform in plating time(20min) and heat treatment temperature(below $200^{\circ}C$), and were confirmed to have adequate bath stability for practical use.

  • PDF