• 한국식품과학회지
• /
• 제33권5호
• /
• pp.507-513
• /
• 2001

마늘의 이용성 증진과 마늘의 기능성 성분을 효율적으로 추출할 수 있는 최적용매에 대한 기초자료를 얻기 위해 마늘을 5종류의 유기용매와 4종류의 산을 사용하여 추출하고 추출수율과 기능성을 조사하여 최적 용매를 선정하였다. 선정된 용매의 농도를 0, 25, 50, 75, 100%로 조절하여 적정농도를 조사하고 적정용매의 pH 조절, 산 및 염의 첨가 시 추출율 및 아질산염 소거작용, 전자공여효과 및 총 thiosulfinates 함량 측정, 항산화성 등의 생리활성을 조사하였다. 마늘의 기능성 성분의 최적추출조건은 극성이 큰 methanol 의한 추출이 효과적이었다. Citric acid를 비롯하여 유기산 및 무기산 (acetic acid, phosphoric acid, tartaric acid)으로 추출할 때 고형분 수율은 높았으나 기능성에서 methanol 보다 효율성이 낮은 값을 보여 전자공여능은 약 1/2 정도 낮았다. 아질산염 소거능은 완충액의 모든 pH 영역에서 낮게 나타났고, 항산화효과인 과산화물 생성억제도 methanol 추출액이 약간 효과가 더 높았다. Methanol과 ethanol의 기능성 성분의 추출효과는 비슷하므로 식품응용을 고려할 때 ethanol이 보다 효과적임을 알 수 있었다. Ethanol의 농도를 달리하여 추출한 결과 50% ethanol 농도에서 가장 추출이 용이하였고 고형분수율 및 기능성도 가장 효과적이었다. 50% ethanol 용매보다 더 효율적인 추출조건을 찾기 위해 50% ethanol 용액의 pH조절과 NaCl, citric acid, $NaH_2PO_4$, $Na_2HPO_4$를 농도별로 첨가하여 추출하였을 때 고형분수율 및 기능성에서 큰 변화를 보이지 않았다. 따라서 마늘 성분의 추출은 50% ethanol 농도가 마늘의 기능성성분들의 효과적인 추출 방법으로 판단된다. Monascin의 경우 맛살에서 $0.01{\sim}3.31\;g/g$ 혼합어육소시지에서 $0.05{\sim}0.10\;g/g$, 반건조소시지에서 $0.34{\sim}0.35\;g/g$이 각각 검출되었고, 나머지 품목에서는 모두 불검출이었다. 한편, ankaflavin의 경우 맛살에서만 $0.02{\sim}0.89\;g/g$이 검출되었으며, 나머지 품목에서는 모두 불검출이었다.gen synthase의 활성은 P군에 비해 POD군에서 높았고(P<0.05), Px 백서가 Sham 백서에 비해 낮았다(P<0.05). Px 백서의 quadriceps 근육내 중성지방 축적량이 Sham 백서에 비해 높았는데, P에 비해 POD를 공급하였을 때 중성지방의 축적양이 낮아졌다. 결론적으로 POD은 당뇨와 정상 백서에서 인슐린 저항성을 감소시킴을 알 수 있었고 이러한 인슐린 저항성의 감소 현상은 근육에서의 glycogen synthase 활성과 관련이 있을 것으로 생각되었다.로 높은 것으로 밝혀졌지만, 그 이상의 농도에서는 낮은 수치를 나타내었다 이상의 결과로 보아 수용성계에서 뿐 만 아니라, 비수용성계에서도 중금속 이온 존재 하에서의 AsA 자동산화반응에서의 $O_2\bar{{\bullet}}$ 생성이 시사되었다.pm, $230^{\circ}C$에서 5.56 ppm으로 점진적으로 감소하였다. 이는 nonanoic acid, palmitic acid, stearic acid등이 고온가열에 의해 생성되었다가 이들이 열분해로 소실되었기 때문으로 생각된다.평균치는 34점이었으며 여윔에서는 너무 살찜으로 갈수록 사회적 체형불안도가 상승하는 경향을 나타내었다. 후쿠오카 지역의 체형 불안 도가 대구지역보다 유의적으로 높았다. 한 일 여대생의 자기 체형인식 및 체형 불안도에

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권2호
• /
• pp.237-246
• /
• 2014

Two experiments were conducted to evaluate the efficacy of feeding an Escherichia coli (E. coli) derived phytase to pigs fed P deficient, corn-soybean meal diets. In Exp. 1, one hundred and twenty crossbred piglets ($9.53{\pm}0.84$ kg) were allocated to one of five treatments which consisted of four low P diets (0.61% Ca, 0.46% total P and 0.24% non-phytate P) supplemented with 0, 500, 1,000, or 20,000 FTU/kg E. coli phytase as well as a positive control formulated to be adequate in all nutrients (0.77% Ca, 0.62% total P and 0.42% non-phytate P). The treatments were applied to six pens with four pigs per pen for 28 days. In Exp. 2, ten crossbred pigs ($19.66{\pm}1.16$ kg) fitted with ileal T-cannula were used in a nutrient balance study. The pigs were assigned to treatments similar to those used in Exp. 1 in a doubly replicated $5{\pm}4$ incomplete Latin square design (5 diets with 4 periods). Each period consisted of a 5-d adjustment period followed by a 3-d total collection of feces and urine and then a 2-d collection of ileal digesta. Supplementation with phytase linearly increased (p<0.05) weight gain, feed intake, feed efficiency, bone breaking strength and fat-free dry and ash bone weight. There were linear increases (p<0.01) in the apparent ileal digestibility (AID) of DM, GE, CP, Ca, total P, inositol hexaphosphate ($IP_6$) and some AA with increasing dose of E. coli phytase. Pigs fed 20,000 FTU/kg had a greater (p<0.05) AID of IP6 (80% vs 59% or 64%, respectively) than pigs fed diets with 500 or 1,000 FTU/kg phytase. There were linear increases (p<0.05) in the total tract digestibility of Ca, total P, Na, K, Mg, and Zn as well as in the retention of Mg and Zn with increased phytase dose. The retention and utilization of Cu, and the total tract digestibility of CP and Cu quadratic increased (p<0.05) with increased phytase dose. In conclusion, supplementation of 500 FTU of phytase/kg and above effectively hydrolyzed phytate in low-P corn-soybean diets for pigs. In addition, a super dose of phytase (20,000 FTU/kg) hydrolyzed most of the IP6 and consequently further improved mineral use, protein utilization and performance.

• 한국세라믹학회지
• /
• 제55권6호
• /
• pp.597-607
• /
• 2018

In this study, a wet chemical method was used to synthesize nanostructured hydroxyapatite for biomedical applications. Diammonium hydrogen phosphate and calcium nitrate 4-hydrate were used as starting materials with a sodium hydroxide solution as an agent for pH adjustment. Scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, differential thermal analysis, thermal gravimetric analysis, atomic absorption spectroscopy, and ethylenediaminetetraacetic acid (EDTA) titration analysis were used to characterize the synthesized powders. Having been uniaxially pressed, the powders formed a disk-like shape. The sinterability and electrical properties of the samples were examined, and the three-point bending test allowed for the measurement of their mechanical properties. Sedimentation analysis was used to analyze the slurry ability of hydroxyapatite. As in-vitro biological properties of the samples, biocompatibility and cytotoxicity were assessed using osteoblast-like cells and the L929 cell line, respectively. Solubility was assessed by employing a simulated body fluid.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.337-340
• /
• 2007

In the dissertation, a power conversion system for fuel cell is composed of a PWM inverter with LC filter in order to convert fuel cell voltage to a single phase 220[V], In addition, new insulated DC-DC converters are proposed in order that fuel cell voltage is boosted to 380[V]. In this paper, it requires smaller components than existing converters, which makes easy control. The proposed DC-DC converter controls output power by the adjustment of phase-shift width using switch S5 and S6 in the secondary switch, which provides 93-97[%] efficiency in the wide range of output voltage. Fuel cell simulator is implemented to show similar output characteristics to actual fuel cell. Appropriate dead time td enables soft switching to the range where the peak value of excitation current in a high frequency transformer is in accordance with current in the primary circuit. Moreover, appropriate setting to serial inductance La reduces communication loss arisen at light-load generator and serge voltage arisen at a secondary switch and serial diode. Finally, TMS320C31 board and EPLD using PWM switching technique to act a single phase full-bridge inverter which is planed to make alternating current suitable for household.

• 한국자기공명학회논문지
• /
• 제21권3호
• /
• pp.102-108
• /
• 2017

Escherichia coli responds to ever-changing external and internal stresses by rapidly adjusting its physiology for better survival. This adjustment occurs at all levels including metabolites as well as mRNAs and proteins. Although there has been many reports describing E. coli's adaptation to various stresses regarding transcriptomics or proteomics, only a few investigations have been reported regarding this adaptation viewed from metabolites' perspective. We applied four different types of stresses at four different doses as imposed by NaCl, sorbitol, ethanol, and pH to investigate the similarities or differences among the stresses, and which stress causes the largest perturbation of the metabolite composition. We profiled the metabolites under such external stresses by using two-dimensional NMR spectroscopy and identified 39 metabolites including amino acids, sugars, organic acids, and nucleic acids. According to our statistical analysis, the osmotic stress caused by sorbitol differentiated itself from others, while NaCl showed the largest dose dependent metabolic perturbations. We hope this work will form a foundation on which an approach to a successful protein production is systematically provided by a favorable metabolic environment by imposing proper external stresses.

• The Korean Journal of Ecology
• /
• 제17권1호
• /
• pp.59-67
• /
• 1994

팔당호 연안대에서 수심에 따른 줄(Zizania latifolia) 개체군의 저토 환경, 경엽부의 밀도, 높이 및 현존량을 조사하였다. 저토의 pH, 유기물함량, 총질소량, 유호태 인량 및 치환성 칼륨량은 수심에 따른 유의한 차이가 없었으나, 모래 함량은 수심이 깊을수록 적었다. 줄 경엽부의 밀도는 수심이 깊을수록 경엽부의 키가 높았고 경엽무 하나의 건물량과 단위면적당 현존량이 많았다. 경엽무 높이의 빈도분포는 줄이 생장함에 따라서 J자형과 첨두형으로 변하였으며, 높이의 불균등도는 감소하였는데, 그 변화는 수심이 깊은 곳에서 보다 빨리 일어났다. 따라서 줄은 수심이 깊을수록 경엽부의 밀도가 낮아지고, 그 높이와 현존량이 증가하여 수면 위로 경엽부를 돌출시키는 생장전략을 가지는 것으로 해석된다.

• ALGAE
• /
• 제21권1호
• /
• pp.133-139
• /
• 2006

Outdoor cultivation of cyanobacterium Spirulina platensis was carried out for 40 days in a batch mode. A half concentration of the SOT based on the underground water was used as culture medium. Working volume was 5.7 tons with 0.2 m depth. During cultivation, mean water temperature, DO and light intensity were all in proper conditions for the S. platensis growth. The adjustment of pH to over 10 with Na2CO3 and addition of the 1.5% natural salt were very effective to delete contaminant organisms, Chlamydomonas moewusii and Chlorella minutissima occurred one after the other in the culture. The mean productivity of the biomass based on the dry cell weight from 14 to 25 days, after the contaminants were deleted, was 7.8 g ·m–2· d–1, which was relatively high productivity in that a half concentration of the SOT was used for the culture. Underground water used in the culture minimized contaminants invasion and addition of the 1.5% natural salt was effective to delete contaminants as well as acted as mineral supplement in outdoor cultivation of S. platensis. Harvesting using the floating activity of S. platensis was effective from mass floating in day time after overnight without agitation and illumination.

• 상하수도학회지
• /
• 제18권3호
• /
• pp.331-336
• /
• 2004

The correlation between polymeric aluminum species of coagulant and its coagulation efficiency was investigated using several commercial polymeric Al(III) inorganic coagulants (Poly Aluminum Hydroxy Chloro Sulfate 2020 (PAHCS2020), Poly Aluminum Hydroxy Chloro Sulfate 2500 (PAHCS2500) which was introduced in Korean water treatment plants. The poly aluminum chloride (PAC), Poly Aluminum Hydroxide Chloride Silicate (PACS)) and the aluminum salts ($AlCl_3$, Alum ($Al_2(SO_4)_3$)) were used for the purpose of comparison. The comparison of the coagulation efficiency of each coagulant was made by turbidity removal through the standard jar testing procedure and the determination of the hydrolytic Al(III) species was made by the ferron method which can differentiate the monomeric aluminum species from the polymeric aluminum species. Overall, PAHCS2020 and PAHCS2500 showed the better performance in turbidity removal than the aluminum salts. The performance of coagulation was even better without adjustment of pH during the coagulation experiment. The positive correlation between polymeric aluminum species of coagulant and coagulation efficiency was found.

• Wind and Structures
• /
• 제31권4호
• /
• pp.321-334
• /
• 2020

Engineering type tropical cyclone (TC) wind field models are used to estimate TC wind hazard. Some of the models are well-calibrated using observation data, while others are not extensively compared and verified. They are all proxies to the real TC wind fields. The computational effort for their use differs. In the present study, a comparison of the predicted wind fields is presented by considering three commonly used models: the gradient wind field model, slab-resolving model, and a linear height-resolving model. These models essentially predict the horizontal wind speed at a different height. The gradient wind field model and linear height-resolving model are simple to use while the nonlinear slab-resolving model is more compute-intensive. A set of factors is estimated and recommended such that the estimated TC wind hazard by using these models becomes more consistent. The use of the models, including the developed set of factors, for estimating TC wind hazard over-water and over-land is presented by considering the historical tracks for a few sites. It is shown that the annual maximum TC wind speed can be adequately modelled by the generalized extreme value distribution.

• Food Science and Biotechnology
• /
• 제16권1호
• /
• pp.18-22
• /
• 2007

The objective of this study was to develop and assess the performance of an aseptic system for liquid milk contained in plastic bottles, from a small-scale production standpoint. Commercial sterility tests conducted on the bottled milk were utilized in our assessments of the system, via the identification and monitoring of the principal points of the process. Four 150 L batches of milk with pH values of approximately 6.7 were heat-processed at between 137 and $143^{\circ}C$ for 10 see in a plate heat exchanger, and then aseptically transferred to 500 mL high-density polyethylene (HOPE) bottles, in an ISO class 7 clean room. The aseptic condition of the bottles was achieved via 10 see of rinsing with a mixture containing 0.5% peracetic acid and 0.8% hydrogen peroxide at $30^{\circ}C$, followed by another rinse with sterile water. Of the 4 batches processed, 2 were determined to exhibit commercial sterility, on the basis of the physical-chemical and microbiological criteria adopted. It was concluded that some adjustment of the processing line was required in order to achieve full commercial sterility for all processes. The aseptic system developed and assessed in this study was demonstrated to have great potential for the processing and transferring of milk into plastic bottles, from a small-scale production standpoint.