• Journal of the Korean Chemical Society
• /
• v.51 no.4
• /
• pp.324-330
• /
• 2007

A new ion selective PVC membrane electrode is developed as a sensor for mercury(II) ions based on bis(benzoylacetone) propylenediimine (H2(BA)2PD) as an ionophore. The electrode shows good response characteristics and displays, a linear Emf vs. log[Hg2+] response over the concentration range of 1.0×10-6 to 1.0×10-1 M Hg(II) with a Nernstian slope of 29.8±0.75 mV per decade and with a detection limit of 2.2×10-7 M Hg(II) over the pH range of 2.5-11.5. Selectivity concentrations for Hg(II) relative to a number of potential interfering ions were also investigated. The sensor is highly selective for Hg(II) ions over a large number of cations with different charge. The sensor has been found to be chemically inert showing a fast response time of 60 s and was used over a period of 3 months with a good reproducibility (S = 0.27 mV). The electrode was successfully applied to determine mercury(II) in real samples with satisfactory results.

• Journal of Sensor Science and Technology
• /
• v.9 no.6
• /
• pp.430-439
• /
• 2000

$In_2O_3$-based thin film sensor with 500-600 nm thick was fabricated for the detection of CO gas by rf magnetron sputtering. In order to improve both sensitivity to CO gas and selectivity to hydrogen gas containing -CH, ultra-thin transition metal Co catalyst was sputtered over $In_2O_3$ thin film and annealed at $500^{\circ}C$. Sensitivity to CO was maximum at the thickness of Co 2.1 nm and $300^{\circ}C$, and that to $C_3H_8$ was at the thickness of Co 1.4 nm and $350-400^{\circ}C$. From the x-ray photoelectron spectroscopy (XPS) result, ultra-thin Co was existed into CoO covered with $Co_2O_3$ on $In_2O_3$ particles, and thus p-n junction of $In_2O_3(n-type)$-CoO(p-type) was thought to be formed. In this p-n junction type sensors, sensing mechanism with reducing gases can be explained by the variation of depletion layer thickness formed in the interface.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.207-209
• /
• 2006

We fabricated a capacitive-type humidity sensor using poly (p-phenylene ether sulfone: PES) as a humidity sensitive layer. The PES was dissolved in m-cresol $(CH_3C_6H_4OH)$ and spin-coated on ITO-coated glass substrate. Gold was deposited by sputtering as a water-permeable upper electrode. The capacitance of the sensor was inversely proportional to sensing film thicknesses and showed an excellent linearity of less than 1% in the humidity range of 20 to 90%. The sensor haying a $1.4{\mu}m$ sensing layer showed a hysteresis of 1.3% and a good sensitivity of 1.14 at 20 kHz.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.66-66
• /
• 2010

$SnO_2$ 나노선은 n-type 반도체 특성을 띄며 트랜지스터, 가스 센서, pH 센서 등 여러 분야에 걸쳐 다양하게 사용되고 있다. $SnO_2$ 나노선은 그 자체만으로 시계방향의 전기적 히스테리시스를 보이며 이것은 나노선 표면에 흡착된 물이나 산소가 발생시키는 전자 갇힘 현상이 가장 큰 원인으로 작용한다. 특히 고분자를 게이트 절연막으로 사용할 경우 게이트 절연막의 전기적 히스테리시스가 소자 특성에 영향을 미치게 되며, 고분자 절연막의 히스테리시스는 $SnO_2$ 나노선의 히스테리시스와 반대인 반시계 방향의 특성을 보인다. 고분자 내에서 발생하는 히스테리시스는 고분자 사이에 흡착된 물 분자나 고분자의 높은 극성을 가지는 작용기 등이 원인으로 작용한다. 전기적 히스테리시스는 FET소자를 구동하는데 있어 부적절한 특성으로, 이것의 원인을 이해하는 것은 중요하며 히스테리시스의 방향과 크기를 조절할 수 있는 기술 또한 중요하다. 본 연구에서는 폴리이미드(PMDA-ODA)를 게이트 절연막으로 사용하여 플렉시블 기판을 만들고 그 위에 $SnO_2$ 나노선을 슬라이딩 전이 방식으로 정렬하여 플렉시블 FET를 제작하였다. 제작된 소자는 $0.7cm\;{\times}\;0.7cm$ 넓이 안에 300개의 FET가 존재하며 SEM 이미지를 통해 넓이 $50{\mu}m$, 길이 $5{\mu}m$의 FET채널에 약 150개의 나노선이 연결되어 있는 것을 확인했다. 이 소자의 히스테리시스는 폴리이미드의 교차결합 정도에 따라, 그리고 폴리이미드 절연막을 제작할 때의 습도에 따라 변하게 된다. 교차결합이 많아지고 습도가 낮아질수록 폴리이미드 절연막 내부에 흡착되는 물분자가 줄어들게 되고 절연막의 히스테리시스가 사라지며 시계방향의 나노선 히스테리시스가 지배적이 된다. 반대로 교차결합이 줄어들고 습도가 높아질수록 폴리이미드 절연막 내부에 물분자가 늘어 나면서 시계반대방향의 폴리이미드 히스테리시스가 FET의 전기적 특성에서 눈에 띄게 나타난다. 이 실험을 통해 고분자 절연막을 사용한 $SnO_2$ 나노선 FET의 전기적 히스테리시스를 조절할 수 있었으며, 소자의 히스테리시스를 없앨 수 있는 가능성에 대해서 논하고자 한다.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.222-227
• /
• 2008

In this work we have studied the antifouling properties of the hydrophobic sol-gel modified sensing membrane and its optical properties for sensor application. E. coli JM109, B. cereus 318 and P. pastoris X-33 were cultivated in confocal cultivation dishes with glass surface, respectively. The glass surface was coated with the hydrophobic sol-gels prepared by the dimethoxy-dimethyl-silane (DiMe-DMOS) and tetramethyl-orthosilicate (TMOS). After cultivation, microorganisms adhered on the surface coated with sol-gels and glass surface were dyed by gram-staining method and the numbers of microorganisms were analyzed based on the image data of the scanning electronic microscope (SEM). A great number of microorganisms, about $2{\sim}3{\times}10^4/mm^2$, was adhered on the glass surfaces which no hydrophobic sol-gels were coated. However, the antifouling effect of the hydrophobic sol-gels was large, that microorganisms of less than $200{\sim}300/mm^2$ were adhered on the coated glass surface. The performance of the sensing membranes for detection of pH and dissolved oxygen was enhanced by recoating the light insulation layer prepared with the mixture of the hydrophobic sol-gel and graphite particles.

• Journal of Sensor Science and Technology
• /
• v.22 no.3
• /
• pp.233-237
• /
• 2013

We fabricated electrolyte-insulator-semiconductor (EIS) devices using a solution process and measured the sensing properties of EIS devices according to the thicknesses of sensing membrane. For high pH sensitivity and better stability properties, we used $SiO_2/HfO_x$ (OH) layer as a sensing membrane. In this work, $HfO_x$ sensing membranes were deposited on 5 nm thick $SiO_2$ buffer layer by spin coater with thicknesses of 15, 31, 42, 55 nm, respectively. As a result, we founded that the thickness of $HfO_x$ sensing membrane affects to sensitivity and chemical stability of EIS device. Especially, the EIS device with 42 nm thick $HfO_x$ membrane showed superior sensing ability in terms of pH-sensitivity, linearity, hysteresis voltage and drift rate characteristics than the other devices. In conclusion, we confirmed that it is possible to improve the sensing ability and the chemical stability properties using optimized thickness of sensing membrane and proper annealing process.

• Journal of the Korean Chemical Society
• /
• v.46 no.5
• /
• pp.407-411
• /
• 2002

A method to determine lead ion in aqueous media using an optical sensor loaded on a fluorescent optode membrane incoporating a metal ion-selective ionophore, a proton-selective chromoionophore and lipophilic anionic sites has been studied. The effects of pH and thickness of membrane on the fluorescence intensity were investigated. The effects of foreign ions such as $Na^+$, $K^+$, $Mn^{2+}$ and $Zn^{2+}$ on the determination of lead ion were also studied. The linear range in the calibration curve for the determination of lead ion was found to be 5.0${\times}10^-7$ to 5.0${\times}$$10^-3$M and the correlation coefficient in this range was -0.99107 under the optimal experimental conditions. The relative standard deviation of the blank signals was 3.0% and the detection limit of lead ion was 5.0${\times}$$10^-9$M.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.30.2-30.2
• /
• 2009

TiO2는 3가지의 결정구조를 가지고 있으며 결정 입자, 구조, 상의 형태에 따라서 성질 및 기능에 영향을 주고 있다. anatase상의 애너지 밴드갭과 전자와의 재결합 확률이 크기 때문에 Rutile상 보다 우수한 성질을 갖고 있어 산화물 반도체로 이용하는 것이 적합하다. 본 실험에서는 나노로드의 TiO2를 수열처리법에 의해 합성한 후 박막을 제조하여 감응특성을 조사하였다. X선 회절분석기(X-Ray Diffraction)로 분석결과 ph=1의 루타일상을 제외하고, pH=2~7의 더 넓은 구간에서 뚜렷한 회절피크의 anatase 상이 나타났으며 다른 비정질상이 발생되지 않는 결정성이 좋은 단결정임이 나타났다. NaOH solution 을 이용하여 수열처리후 $180^{\circ}C$이상의 특정 온도 구간에서 수십 나노 로드 형태로의 2차 성장된 모습을 TEM과 EDS로 결정구조와 화학조성을 분석하였다. 그리고 BET 측정을 통해 $180^{\circ}C$의 소성온도에서 TiO2 입자의 비표면적이 가장 우수한 것으로 나타났다. 나노로드의 수용액을 Al2O3기판의 감지막 위에 떨어뜨려 네트워크된 막을 형성한후에 센서를 제작하였다. 히터 전압이 $400^{\circ}C$에서 나노 파우더센서에서는 반응이 일어나지 않은 반면, 나노 로드센서는 CH3SH에서 28% 의 높은 감도를 얻었고, Toluene의 반응에서는 15%의 감도가 나타났다. 그 외 NO, CO, H2등의 측정에서 아무런 반응이 일어나지 않았다. 이는 비교적 기공이 큰분자(Size)를 가진 CH3SH=76nm, Toluene=60nm에서 반응이 일어난 반면, H2=28nm, CO=22nm에서 감도가 나타나지 않은 것을 보아 흡착분자크기에 의한 영향이 큰 것으로 나타났다.

• Journal of Environmental Science International
• /
• v.5 no.2
• /
• pp.211-220
• /
• 1996

New thin-and diselena-crown ethers containing two suffer and selenium donor atoms have been prepared. And then, mercury ($Hg^{2+}$) ion-selective electrodes with PVC-plasticizer (STPB) based on some macrocycles as neutral carriers were also made. The electrochemical selectivities for various ions, and the effects for macrocycles, matrix of membranes, ratio of plasticizer to macrowcles, concentration and pH of test solution were investigated on the $Hg^{2+}$ ion-selective electrodes. The 1, 10-diselena-18-crown-6-PVC-STPB (sodium tetraphenylborate) exhibited good linear responses of ${28.2}\pm{0.6}$ decade-1 for $Hg^{2+}$ ion in the conientration ranges of $10^{-2}~10^{-6}$ M $Hg^{2+}$ ion. This electrode exhibited comparatively good selectivities for $Hg^{2+}$ ion in comparison with alkali and alkaline earth metal ions, some heavy metal ions and rare earth metal ion in the range of pH 2.5~6.0. In addition, this electrode was applied as a sensor in the titration of $Hg^{2+}$ ion with $1^-$ ion in water.

• Journal of Sensor Science and Technology
• /
• v.15 no.3
• /
• pp.192-198
• /
• 2006

In this study, the light addressable potentiometric sensors (LAPS) with $Si_{3}N_{4}/SiO_{2}/Si$, and $Ta_{2}O_{5}/SiO_{2}/Si$ structures were fabricated. The penicillinsae was immobilized on the devices to hydrolyze the penicillin using self-assembled monolayer (SAM) method. Then response characteristics according to the penicillin concentrations were measured and compared. The measuring system was simplified by using LabVIEW. The pH response characteristics of fabricated devices are 56 mV/pH ($Si_{3}N_{4}$ sensing membrane) and 61 mV/pH ($Ta_{2}O_{5}$ sensing membrane). The sensitivity of sensor by enzyme reaction result of the enzyme reaction were 60 mV/decade and 74 mV/decade for $Si_{3}N_{4}/SiO_{2}/Si$ and $Ta_{2}O_{5}/SiO_{2}/Si$ structure, respectively, in the range of $0.1\;mM{\sim}10\;mM $of the penicillin concentration.