• 센서학회지
• /
• 제18권1호
• /
• pp.54-62
• /
• 2009

${Co_3}{O_4}$ and ${Co_3}{O_4}$-based thick films with additives such as ${Co_3}{O_4}-{Fe_2}{O_3}$(5 wt.%), ${Co_3}{O_4}-{SnO_2}$ (5 wt.%), ${Co_3}{O_4}-{WO_3}$(5 wt.%) and ${Co_3}{O_4}$-ZnO(5 wt.%) were fabricated by screen printing method on alumina substrates. Their structural properties were examined by XRD and SEM. The sensitivities to iso-${C_4}H_{10}$, $CH_4$, CO, $NH_3$ and NO gases were investigated with the thick films heat treated at $400^{\circ}C$, $500^{\circ}C$ and $600^{\circ}C$. From the gas sensing properties of the films, the films showed p-type semiconductor behaviors. ${Co_3}{O_4}-{SnO_2}$(5 wt.%) thick film heat treated at $600^{\circ}C$ showed higher sensitivity to i-${C_4}H_{10}$ and CO gases than other thick-films. ${Co_3}{O_4}-{SnO_2}$(5 wt.%) thick film heat treated at $600^{\circ}C$ showed the sensitivity of 170 % to 3000 ppm iso-${C_4}H_{10}$ gas and 100 % to 100 ppm CO gas at the working temperature of $250^{\circ}C$. The response time to i-${C_4}H_{10}$ and CO gases showed rise time of about 10 seconds and fall time of about $3{\sim}4$ minutes. The selectivity to i-${C_4}H_{10}$ and CO gases was enhanced in the ${Co_3}{O_4}-{SnO_2}$(5 wt.%) thick film.

• 센서학회지
• /
• 제26권3호
• /
• pp.204-208
• /
• 2017

Highly uniform and well-dispersed Zeolitic Imidazolate Framework-7 (ZIF-7) particles were prepared by the precipitation of $Zn^{2+}$ using benzimidazole, which were converted into ZnO nanoparticles by heat treatment at $500^{\circ}C$ for 24 h. The ZIF-7 derived ZnO nanoparticles showed abundant mesopores, high surface area, and good dispersion. The gas sensing characteristics toward 5 ppm acetone, ethanol, trimethylamine, ammonia, p-xylene, toluene, benzene, and carbon monoxide and carbon dioxide were investigated at $350-450^{\circ}C$. ZIF-7 derived ZnO nanoparticles exhibited high response to 5 ppm acetone ($R_a/R_g=57.6$; $R_a$: resistance under exposure to the air, Rg: resistance under exposure to the gas) at $450^{\circ}C$ and negligible cross-responses to other interference gases (trimethylamine, ammonia, p-xylene, toluene, benzene, carbon monoxide, carbon dioxide) and relatively low responses to ethanol. ZIF derived synthesis of metal oxide nanoparticles can be used to design high performance acetone sensors.

• 한국환경과학회지
• /
• 제5권2호
• /
• pp.211-220
• /
• 1996

두 개의 황과 셀렌의 주개원자를 포함한 새로운 thia 및 diselena 크라운에데르 화합물을 합성하였다. 그리고 이 화합들을 중성운반체로 하고 PVC-가소제 (STPB)를 포함한 Hg(ll) 선택성 전극을 제작하였다. 이 전극들을 이용하여 여러 이온들의 전기화학적 선택성, 중성운반체의 종류 및 농도와 선택막의 매질에 대한 효과 그리고 실험용액의 pH변화에 대한 전극의 선택적 감응성들의 영향을 각각 검토하였다. 1,10-diselena-18-crown-6-PVC-STPB의 중성운반체의 막전극은 $10^{-2}$-10- M $Hg^{2+}$ 이온의 농도범위에서 ${28.2}\pm{0.6}$의 Nernstian 기울기를 갖는 좋은 선형적 감응성을 갖는다. 그리고 이 전극은 pH 2.5~6.0 범 위에서 알칼리토 금속, 몇가지 중금속 및 희토류 금속 이온에 대하여 좋은 선택성을 갖는다. 특히 이 전극은 수용액 중에서.$1^-$ 이온으로 Hg^{2-}$ 이온을 전위차 적정할 수 있는 센서로서 응용할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1762-1765
• /
• 2004

This paper suggest the field test method of PD UHF sensor's sensitivity for a high voltage GIS and prove a reliability of the field test method through the test results of UHF sensor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.11-14
• /
• 2000

This paper presents the vibration control of a glass-fiber reinforced thermoplastic composite beam with a distributed PVDF sensor and piezo-ceramic achlator. The three types of different controllen which are PID, H$\infty$ , and p-synthesis ontrollcr are employed to achieve vibration suppression in the transient vibration of composite beam. In the H$\infty$ , controller design, 1st and 2nd natural frequencies are considered in the modeling, because robust control theory which has robustness to struchred uncertainty is adopled Lo suppress the vibration. If the controller designed by H$\infty$ , theory does not satisfy control performance, it is improved by $\mu$ -synthesis method with D-K iteration so that the$\mu$-contoller based on the structured singular value satisfies the nominal performance and robust performance Simulations and experiments were carried out with the designed controllers m order to demonstrate the suppression efficiency of each controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.121-124
• /
• 2004

This paper suggest the field test method of PD UHF sensor's sensitivity for a high voltage GIS and prove a reliability of the field test method through the test results of UHF sensor.

• 약학회지
• /
• 제40권6호
• /
• pp.625-631
• /
• 1996

The $H^+$-selective membrane consists of tridodecylamine, 2-nitrophenyl octyl ether and a little amount of additive in carboxylated PVC matrix, where penicillinase(Pcase ) and glutaraldehyde may be covalently attached to the matrix. When the $H^+$-selective electrode was used as a detector of biosensor, calibration curve calculated from Nernst equation was not linear. So we investigated the characteristic responses of the $H^+$-selective electrode to the product H+ from hydrolysis of penicillin-G(Pc-G) and plotted calibration curve correlating potential to concentration of Pc-G linearly. The optimal concentration of buffer solution was theoretically calculated and was also experimented. We tried to explain the linear curve of potential to concentration of Pc-G by using Henderson-Hasselbach equation. This method is more effective in calibration curve plotting than any other previous methods. The results obtained may help in further developing pH electrodes with improved analytical preformance.

• 공업화학
• /
• 제19권2호
• /
• pp.222-227
• /
• 2008

본 연구에서는 광학센서의 응용을 위해 소수성 졸-겔로 개질된 고분자 막의 미생물 비점착 특성과 광학특성을 조사하였다. DiMe-DMOS (Dimethoxy-dimethylsilane)와 TMOS (Tetramethyl-orthosilicate)를 이용하여 제조한 소수성 졸-겔로 코팅된 컨퍼컬디쉬 표면과 유리표면에 E. coli JM109, B. cereus 318 그리고 P. pastoris X-33을 배양하였다. 배양 후, 부유세포를 증류수를 이용하여 제거하고 그람 염색법에 의해서 점착된 미생물을 염색하였다. 점착된 미생물의 수는 SEM을 이용하여 정량적으로 분석하였다. 유리표면에는 $2{\sim}3{\times}10^4$개/$mm^2$의 미생물이 점착되었으나 소수성 졸-겔 표면에는 200~300개/$mm^2$의 미생물이 점착됨으로써 소수성 졸-겔의 비점착 효과를 알 수 있었다. 또한, 소수성 졸-겔과 절광물질인 흑연을 혼합하여 제조한 절광층(Light insulating layer)을 pH나 용존산소 검출막 위에 재코팅한 후, pH나 용존산소의 검출막의 성능이 향상되었음을 알 수 있었다.

• 센서학회지
• /
• 제27권3호
• /
• pp.170-174
• /
• 2018

In this paper, the $TiO_2$/glucose oxidase (GOD) mixture has synthesized through simple and low-cost fabrication methods. The physical properties of the mixture were proved using an FT-IR/NIR spectrometer, an X-Ray diffractometer, and a Raman spectrometer. GOD maintained its bioactivity during all fabrication process. The current characteristics of the glucose biosensor were proportional to the glucose concentration and effective surface area of square pyramid on a silicon substrate. The maximum current change was measured in a pH 7.0 buffer solution. The simple and low-cost fabrication process and surface treatment can be used widely in previous research for improvements in effective surface area.

• 센서학회지
• /
• 제26권6호
• /
• pp.420-426
• /
• 2017

A colorimetric sensor was investigated to achieve a low-cost warning device for harmful gaseous formaldehyde (HCHO). The sensor is based on selective reactions between hydroxylamine sulfate and HCHO, leading to the production of sulfuric acid. The produced acid results in color-changing response through the acid-base reaction with dye molecules impregnated on a solid membrane substrate. For attaining this purpose, sensors were fabricated by drop-casting a dye solution prepared using different pH indicators on various commercially available polymer sheets, and their colorimetric responses were evaluated in terms of sensitivity and reliability. The colorimetric sensor using bromophenol blue (BPB) and nylon sheet was found to exhibit the best performance in HCHO detection. An initial bluish green of a sensor was changed to yellow when exposed to gaseous formaldehyde. The color change was recorded using an office scanner and further analyzed in term of RGB distance for quantifying sensor's response at different HCHO(g) concentrations. It exhibited a recognizable colorimetric response even at 50 ppb, being lower than WHO's standard of 80 ppb. In addition, the sensor was found to have quite good selectivity in HCHO detection under the presence of common volatile organic compounds such as ethanol, toluene, and hexane.