• 한국표면공학회지
• /
• 제51권3호
• /
• pp.179-184
• /
• 2018

In this study, Ni and tungsten carbide (WC) nanoparticles are simultaneously synthesized with the mesoporous carbon nanoparticles (CNP) using a solution plasma processing (SPP) in the benzene. The Ni and WC nanoparticles were formed through the sputtering effect of electrodes during discharge, and mean time CNP were formed through reduction reaction. TEM observation showed that loaded Ni and WC nanoparticles were evenly dispersed on the CNP. The results of electrochemical analysis demonstrated that an introduction of Ni nanoparticles promoted to improve catalytic activity for oxygen reduction reaction (ORR). Moreover, Ni-WC/CNP lead to fast electron transfer process compared to that of WC/CNP. Therefore, the inexpensive Ni-WC/CNP might be a promising as catalytic material for cathodes in fuel cell applications.

• Journal of Photoscience
• /
• 제2권2호
• /
• pp.77-81
• /
• 1995

Photoreactions of pseudosaccharin ethers have been investigated. Pseudosaccharin 3-allyl ether undergoes a facile photoreaction via reaction pathways involving homolysis of bond between pseudosaccharyl oxygen and 3-allyl carbon, and excited nucleophilic substitution of allyloxy group by solvent which are not quenched by oxygen present in the reaction. Product yield demonstrates that the homolysis pathway predominates over the nucleophilic substitution in ca. 7:1 ratio. In contrast, pseudosaccharin alkyl ethers follow different reaction routes to produce two products, solvent-substituted pseudosaccharin alkyl ethers and reduction products, 3-alkoxy-1, 2-benzisothiazoles. The formations of reduction products, 3-alkoxy-1, 2-benzisothiazoles are completely quenched by oxygen.

• 조명전기설비학회논문지
• /
• 제19권4호
• /
• pp.79-84
• /
• 2005

본 논문은 액중 이온교환수 발생장치 내에 양${\cdot}$음이온교환격막을 중심으로 불평등전계를 형성할 수 있는 사선빗살형 전극을 설치하였다. 그리고 정극성과 부극성의 펄스전압을 인가하여 펄스전압의 극성변화에 의한 산화환원전위 변화가 이온교환수 발생장치 내에서 발생된 용존산소량에 미치는 영향을 비교 검토하였다. 실험결과, 이온교환수 발생장치 내에 인가된 펄스전압의 극성변화와 전기비저항의 차에 의한 산화환원전위 및 용존산소농도 변화를 관찰할 수 있었다. 그리고 인가된 펄스전압의 극성변화와 전기 비저항 차에 의한 전위변화가 용존산소농도를 증가시켜 액중에서 고농도의 이온들을 생성시킴을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.251.1-251.1
• /
• 2013

Combination of oxidative vacuum annealing and oxygen plasma treatment can serve as a simple and efficient method of line-width modification of imprinted nanopatterns. Since the vacuum annealing and oxygen plasma could lead mass loss of polymeric materials, either one of the process can yield a narrowed patterns. However, the vacuum annealing process usually demands quite high temperatures (${\geq}300^{\circ}C$) and extended annealing time to get appreciable line-width reduction. Although the plasma treatment may be considered as an effective low temperature rapid process for the line-width reduction, it is also suffering for the lowered controllability on application to very fine patterns. We have found that the vacuum annealing temperature can be lowered by introducing the oxygen in the vacuum process and that the combination of oxygen plasma treatment with the vacuum annealing could yield the best result in the line-with reduction of the imprinted polymeric nanopatterns. Well-defined line width reduction by more than 50% was successfully demonstrated at relatively low temperatures. Furthermore, it was verified that this process was applicable to the nanopatterns of different shapes and materials.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.81-86
• /
• 2005

The purpose of this study is to develop venturi type after-burner in order to obtain pollutant reduction effect and find the best stable combustion condition. For this purpose, through a flow analysis, the shape of venturi type was made and flame holder locations were also decided by measuring chemical species at before and after the after-burner. Also, various chemical species concentration were measured at changing the induced air rates and the oxygen for oxygen enrichment for the solution the problems of much oxygen flow rate and the flame stability range. As results of this study, a flow distribution and the purification effect was excellent at venturi contraction 0.5 and flame holder location 12mm below the center of Venturi throat. On the purification characteristics, we found that pollutants reduction was effective when area ratio and oxygen are increased. But there are suitable quantities due to the flame shape change and combustion efficiency.

• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.354-361
• /
• 2022

In a direct methanol fuel cell system (DMFC), one of the drawbacks is methanol crossover. Methanol from the anode passes through the membrane and enters the cathode, causing mixed potential in the cell. Only Pt-based catalysts are capable of operating as cathode for oxygen reduction reaction (ORR) in a harsh acidic condition of DMFC. However, it causes mixed potential due to high activity toward methanol oxidation reaction of Pt. To overcome this situation, developing Pt-based catalyst that has methanol tolerance is significant, by controlling reactant adsorption or reaction kinetics. Pt/C decorated with phosphate ion was prepared by modified polyol method as cathode catalyst in DMFC. Phosphate ions, bonded to the carbon of Pt/C, surround free Pt surface and block only methanol adsorption on Pt, not oxygen. It leads to the suppression of methanol oxidation in an oxygen atmosphere, resulting in high DMFC performance compared to pristine Pt/C.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.222.1-222.1
• /
• 2015

Recently, graphene quantum dots (GQDs) have attracted great attention due to various properties including cost-effectiveness of synthesis, low toxicity, and high photostability. Nevertheless, the origins of photoluminescence (PL) from GQDs are unclear because of extrinsic states of the impurities, disorder structures, and oxygen-functional groups. Therefore, to utilize GQDs in various applications, their optical properties generated from the extrinsic states should be understood. In this work, we have focused on the effect of oxygen-functional groups in PL of the GQDs. The GQDs with nanoscale and single layer are synthesized by employing graphite nanoparticles (GNPs) with 4 nm. The series of GQDs with different amount of oxygen-functional groups were prepared by the chain of chemical oxidation and reduction process. The fabrication of a series of graphene oxide QDs (GOQDs) with different amounts of oxygen-contents is first reported by a direct oxidation route of GNPs. In addition, for preparing a series of reduced GOQDs (rGOQDs), we employed the conventional chemical reduction to GOQDs solution and controlled the amount of reduction agents. The GOQDs and rGOQDs showed irreversible PL properties even though both routes have similar amount of oxyen-functional groups. In the case of a series of GOQDs, the PL spectrum was clearly redshifted into blue and green-yellowish color. On the other hand, the PL spectrum of rGOQDs did not change significantly. By various optical measurement such as the PL excitation, UV-vis absorbance, and time-resolved PL, we could verify that their PL mechanisms of GOQDs and rGOQDs are closely associated with different atomic structures formed by chemical oxidation and reduction. Our study provides an important insights for understanding the optical properties of GQDs affected by oxygen-functional groups. [1]

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.32-44
• /
• 2002

Selective catalytic reduction of nitric oxide by methane in the presence of excess oxygen was investigated over copper and cobalt ion-exchanged ZSM-5 zeolites. Copper ion-exchanged ZSM-5(Cu-ZSM-5) has the limitations for commercial applications to lean-bum gasoline and diesel engines due to low thermal stability and resistance to water vapor and sulfur dioxide. But cobalt ion-exchanged ESM-5(Co-ZSM-5) is more active at high temperatures and also stable to water vapor and sulfur dioxide for catalytic reduction of nitric oxide by methane. The catalytic activity of Cu-ZSM-5 for NO reduction increases with increasing temperatures, reaches the maximum conversion of 23.0% at 350\"C. and then decreases with higher temperatures. In the meantime catalytic activities of Co-ZSM-5 show the maximum conversion of 25.8% at $500^{\circ}C$ Therefore Co-ZSM-5 catalysts have higher thermal stability at high temperatures. Catalytic activities of both zeolites were remarkably enhanced with the existence of oxygen in the exhaust. It is noted that the catalytic activity of Cu-ZSM-5 decreases with the increasing concentration of methane while the catalytic activity of Co-ZSM-5 decreases with increasing contents of methane in the exhaust. This may imply the existence of different paths of NO reduction by methane in the presence of excess oxygen fur Cu-ZSM-5 and Co-ZSM-5 catalysts. For binary metal ionexchanged ZSM-5, the primary ion-exchanged metal may be masked by secondary ion-exchanged component, which plays the important role for catalytic activities of binary metal ion-exchanged ZSM-5, Therefore CuCo-ZSM-5 catalysts show the similar volcano-shaped curves to Cu-ZSM-5 catalysts between the activity and temperature. It Is interesting that the activities of CoCu-ZSM-5 catalysts indicate almost no dependence on the concentration of methane in the exhaust.aust.

• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.31-38
• /
• 2010

In this study, we have demonstrated the fine structure effect of PdCo electrocatalyst on oxygen reduction reaction activity with different alloy composition and heat-treatment time. In order to identify the intrinsic factors for the electrocatalytic activity, various X-ray analyses were used, including inductively coupled plasma-atomic emission spectrometer, transmission electron microscopy, X-ray diffractometer, and X-ray Absorption Spectroscopy technique. In particular, extended X-ray absorption fine structure was employed to extract the structural parameters required for understanding the atomic distribution and alloying extent, and to identify the corresponding simulated structures by using FEFF8 code and IFEFFIT software. The electrocatalytic activity of PdCo alloy nanoparticles for the oxygen reduction reaction was evaluated by using rotating disk electrode technique and correlated to the change in structural parameters. We have found that Pd-rich surface was formed on the Co core with increasing heating time over 5 hours. Such core shell structure of PdCo/C showed that a superior oxygen reduction reaction activity than pure Pd/C or alloy phase of PdCo/C electrocatalysts, because the adsorption energy of adsorbates was apparently reduced by lowering the dband center of the Pd skin due to a combination of the compressive strain effect and ligand effect.

• 청정기술
• /
• 제20권3호
• /
• pp.212-217
• /
• 2014

재생공정에서 황화 된 탈황흡수제의 재생을 위하여 산소는 산화제로 사용되었다. 재생공정에서 미량의 미 반응 산소는 직접 황 회수 공정으로 유입된다. 그러나, $SO_2$ 환원을 위한 반응성은 미 반응 산소의 다양한 이유에 의해서 저하된다. $SO_2$ 환원을 위한 반응성 실험을 위해 Sn-Zr계 촉매가 사용되었으며, $SO_2$와 $O_2$는 각각 5.0 vol%와 4.0 vol%로 고정하였고 $300-450^{\circ}C$와 1-20 atm에서 수행되었다. 본 연구에서는 고온건식 탈황공정의 직접 황 회수공정에 유입되는 미 반응산소에 의한 촉매반응성 저하에 미치는 영향을 조사하였다. $SO_2$ 환원으로 생성된 원소 황은 미 반응산소에 의해서 재산화되고, redox반응기구에서 Sn-Zr계 촉매의 빈 격자 산소자리가 미 반응산소에 의해서 재산화되므로 $SO_2$ 전화율은 감소되는 것으로 판단된다. 한편 환원제로써 공급된 CO는 미 반응산소에 의해서 산화되어 연소열에 의해 촉매 충전 층 온도가 상승되기도 한다. 결과적으로 충전 층의 빠른 온도상승은 활성 물질을 소결시켜 촉매의 비활성화를 초래하게 된다.