• KSBB Journal
• /
• v.9 no.2
• /
• pp.224-229
• /
• 1994

Iturin, an antifungal lipopeptide, fermentation by Bacillus subtilis was investigated focusing on the effeats of nutrients aeration and specific cell growth rate on iturin production. Cell growth and product formation were not affected by different kinds of carbon sources such as sucrose, glucose and fructose. Soytone concentration above 20g/$\ell$ did not influence iturin production. Diauxic growth pattern appeared when only soytone was used as a sole nitrogen source probably due to the shortage of amino acids and/or peptides in soytone which could be favorably assimilated by the cells. The composition of three major components in iturin was not changed significantly by the variation of dissolved oxygen concentration of the culture broth but changed substantially by the change of specific growth rate of the cells.

• Nuclear Engineering and Technology
• /
• v.33 no.4
• /
• pp.355-364
• /
• 2001

In order to evaluate and finally optimize the vitrification condition for combustible dry active waste (DAW), dust and gas generation characteristics were investigated for PE, cellulose, and mixed waste Tests were conducted by varying the operation variables such as melter configuration, excess oxygen amount, and waste feeding rate. Results showed that dust generation characteristics were affected by the operation parameters and the melter＇s configuration is the dominant one. For all tested DAWs, dust generation was reduced by increasing the waste feeding rate and the excessive oxygen amount in the melter. Among waste types, dust amount was decreased by the order of mixed wastes, PE, and cellulose. Other parameters such as temperature variation and operation time have also affected the dust generation. The optimum condition for the DAW vitrification was determined as the melter＇s configuration equipped for minimizing the waste dispersion with 20 kg/h of waste feeding rate and 100% of excessive oxygen supply. CO gas concentration in the off-gas was immediately influenced by the combustion state in the melter, but showed similar trend as the dust generation. For the NOx production during the vitrification process, thermal NOx, which is generated from the Post Combustion Chamber (PCC), rather than fuel NOx was assumed to be dominant. The gas cleaning of efficiencies of the PCC, wet scrubber, and Selective Catalytic Reduction system (SCR) were found to be high enough to keep the concentration of pollutants (CO, NOx, SOx, HCI) in the stack below their relevant emission limits.

• 한국해양학회지
• /
• v.27 no.4
• /
• pp.303-310
• /
• 1992

Studies on the distribution of nitrogenous compounds, and respiratory oxygen consumption rate were carried out in Masan Bay, Korea where large amount of industrial and domestic wastewaters are discharged. In August 1986 the surface layer was significantly influenced by freshwater input. Below the seasonal pycnocline, an oxygen-deficient condition developed in a large area of Masan Bay. Concentrations of DIN, DON and PN were 735.6, 1261.8 and 48.5 umol/l at the head, and 79.1, 73.0 and 39.5 umol/l at the mouth of the inner Masan Bay, respectively. Phytoplankton carbon production was 2,695 mgC/m$^2$/day at the mouth of inner Masan Bay. Dissolved oxygen contents were lower than 1 ml/l from 3 m depth in inner Masan Bay and from 10 m depth in the outer Masan Bay. The high concentration of ammonium and phosphate in the lower layer suggests the active degradation of organic materials in the bottom waters and leaching from sediments. The ERS activity was 232.1 ul O$_2$/l/h in the surface waters of the innermost part of Masan Bay and respiratory oxygen consumption is likely to proceed at a rate of 442 ml O$_2$/m$^2$/day in the bottom waters of this bay. Nitrate removal rate was estimated to be 0.25 umol/l/day via denitrification in the bottom waters of the Masan Waterway. It is estimated from the ETS activity that, at the mouth of inner Masan Bay, 9.3-10.5% of carbon fixed in the upper layer was decomposed below the themocline.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.2
• /
• pp.124-130
• /
• 2013

Of all the brominated flame retardants (BFRs), TBBPA has the largest production volume (50% of the BFRs in current use). It is interest to investigate how they may degrade, because of it can pose an environmental hazard. By using UV-A (${\lambda}=352nm$ ), we have found that the UV-A irradiation increased the photodecomposition reaction rate of TBBPA in an intensity-dependent manner. We also observed 2,6-dibromo-p-benzosemiquinone radical ($a_{2H}=2.36G$, g = 2.0056) generated from TBBPA by reaction with singlet oxygen ($^1O_2$). On the other hand, when an aqueous preparation of HA was irradiated in the presence of TBBPA, the typical spectrum of semiquinone radical was detected by electron spin resonance (ESR). And then, we have found that the photodecomposition rate of TBBPA is decreased in depend on HA concentration. Radical formation and the reactive rate of TBBPA were inhibited by sodium azide used as a singlet oxygen quencher. Therefore we report that a similar $^1O_2$-induced oxidation can be initiate in aqueous solutions of TBBPA dissolved in humic acid (HA) by the UV-A irradiation (${\lambda}=352nm$). From these results, we suggest that the reaction rate of HA with $^1O_2$ is faster than that of TBBPA with $^1O_2$.

• KSBB Journal
• /
• v.8 no.5
• /
• pp.438-445
• /
• 1993

Raw cow manure was treated by a 4-step integrated system with phase separation anaerobic digestion and algal culture. When the first methane fermentation was performed by the effluent from the acid fermenter with retention time of 4 days, the elrerage blogas production rate was 977m1/1 culture/day Gas productivity compared to conventional single-stage anaerobic digestion increased up to 31.4%. As the 2nd methane fermenter was fed by the effluent from the first methane fermenter with 4 days of retention time, average amount of 428m1/1 culture/day of biogas was produced. The reduction rate of COD in the effluent from the acid fermenter, the 1st and the 2nd methane fermenter were 71.8%, 42.6% and 24.0% respectively. Finally, we examined algal treatment process for the effluent from the 2nd methane fermenter. A semi-continuous culture of Chlorella sp. PSH3 was conducted by feeding the effluent with retention time of 10days. In this process, the production rate of algal biomass and COD reduction rate were averaged 1.8g/1 culture/day(2.8$\times$106 cells/ml) and 73%, respectively. Through the 4-setp treatments, the total chemical oxygen demand was reduced from 51,300ppm to 85ppm. Therefore, the reduction rate of total chemical oxygen demand reached about 99.8%. The results indicate that the integrated system could be applicable for treatment of organic wastes, concurrently producing biogas and algal biomass.

• The Journal of Engineering Geology
• /
• v.30 no.3
• /
• pp.303-314
• /
• 2020

Bottled water companies submit monthly hydrologic data including periodical environmental effects investigation, daily water production capacity, water production, water level, water chemistry (pH, EC, temperature) per hour and strictly manage groundwater by periodical analyses. Thus few problems concerning drawdown due to excess intake of groundwater take place. Nevertheless, bottled water companies are imprinted as a contribution to civil affairs resulted regarding groundwater near the companies. Therefore, a new method is required during water balance analysis in environmental effects evaluation, which should be compatible with the evaluation by hydrologic experts as well more accessible to non-experts. In this study, water level of surface water and recharge rate in subcatchment where water production wells are located were measured and monthly baseflow rates were separated from normal streams. Besides, recharge properties of groundwater and surface water in the same catchment area were estimated using analyses of oxygen and hydrogen isotopes in groundwater (production well), surface water, and rainfall.

• 한국해양학회지
• /
• v.26 no.3
• /
• pp.204-222
• /
• 1991

The annual cycles of plant major nutrients and dissolved oxygen in a nutrients-rich semi-enclosed coastal inlet, chinhae Bay, of the southern coast of the Korean Peninsula are first presented. The water column of the bay is stratified during summer (April-late September) and well0mixed during winter (October-March). During the summer stratification period, dissolved oxygen contents exceed 400uM in the surface but diminish to less than 50uM in the near bottom waters, which often results in an anoxic environment in the inner part of Chinhae Bay. After the breakdown of the stratification in October, dissolved oxygen concentration remains undersaturated until February. The evidence of allochthonous input of N-nutrients throughout the year is readily seen in the water column: however. crude budget calculations show that the nutrients are efficiently utilized within the bay ecosystem, and that export of the nutrients from the bay to the shelf must be negligible. There is no sign of the enrichment of the nutrients in the water column. The eutrophication phenomenon sensu stricto is not observed in chinhae Bay. Using the standing stock of dissolved oxygen and estimation of the oxygen fluxes across the air-sea boundary, a benthic oxygen respiration rate during winter is estimated conservatively at 21-24 mmol Cm/SUP -2/d/SUP -1/. this oxygen respiration rate accounts for about 20% of the total phytoplankton production in winter.

• Korean Journal of Materials Research
• /
• v.28 no.6
• /
• pp.324-329
• /
• 2018

Needle-like NiO protecting layers on NiCrAl alloy foam, used as support for hydrogen production, are introduced through electroplated Ni and subsequent microwave annealing. To improve the stability of the NiCrAl alloy foam, oxygen concentration of microwave annealing to form a needle-like NiO layer with good chemical stability and corrosion resistance is controlled in a range of 20 and 50 %. As the oxygen concentration increases to 50 %, needle-like NiO forms a dense coating layer on the NiCrAl alloy foam; this layer formation can be attributed to accelerated growth of the (200) plane. In addition, the increased oxygen concentration causes increased NiO/Ni ratio of the resultant coating layer on NiCrAl alloy foam due to improved rate of the oxidation reaction. As a result, the introduction of dense needle-like NiO layers formed at 50 % oxygen concentration improves the chemical stability of the NiCrAl alloy foam by protecting the direct electrochemical reaction between the electrolyte and the foam. Thus, needle-like NiO can be proposed as a superb protecting layer to improve the chemical stability of NiCrAl alloy form.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.7-10
• /
• 2009

The development and evaluation of solid propellant were performed for the turbopump pyro starter, which start up the liquid propellant rocket engine for the Space Launch Vehicle (SLV). Requirements for the turbopump pyro starter propellant include the production of low flame temperature, low burning rate and nontoxic gas to protect the mechanical corrosion or air pollution. This study describes the development of the solid propellant composition which is based on PCP binder. DHG (Dihydroxy glyoxime), which has advantages of oxygen balance and ignition, was used as coolant. The mechanical properties and burning rate of the propellants were measured. Finally, static fired test was performed to prove the possibility of development.

• KSBB Journal
• /
• v.13 no.2
• /
• pp.203-208
• /
• 1998

We investigated the effects of dissolved oxygen (D.O.) and fructose (C-source) on cell growth and biosynthesis of cyclosporin A (CyA) produced as a secondary metabolite by a wild-type filamentous fungus, Tolypocladium inflatum. This was performed by controlling the level of D.O. and the residual C-source, as required, through adjustment of medium flow rate, medium concentration and agitation rate in fed-batch cultures. CyA production was furned out to be maximal, when D.O. level was controlled around 10% saturated D.O. and concentration of the C-source was maintained sufficiently low (below 2 g/L) not to cause carbon catabolite repression. Under this culture condition, we obtained the highest values of CyA concentration (507.14 mg/L), Qp (2.11 mg CyA/L/hr), $Y_x/s$ (0.49 g DCW/g fructose), $Y_p/s$<(22.56 mg CyA/g fructose), and YTEX>$_p/x$ (48.31 mg CyA/g DCW), but relatively lower values of cell concentration (11.98 g DCW/L) and cell productivity (0.043 g DCW/L/hr), in comparison with other parallel fed-batch fermentation conditions. These results implied that, in the carbon-limited culture with 10% saturated D.O. level, the producer microorganism utilized the C-source more efficiently for secondary metabolism.