• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.3
• /
• pp.90-96
• /
• 2004

The objective of this study was to develop a model for safe work load based on a physiological model of metabolic energy of manual material handling tasks. Fifteen male subjects voluntarily participated in this study. Lifting activities with four different weights, 0, 8, 16, 24kg, and four different working frequencies (2, 5, 8, 11 lifts/min) for a lifting range from floor to the knuckle height of 76cm were considered. Oxygen consumption rates and heart rates were measured during the performance of sixteen different lifting activities. Simplified predictive equations for estimating the oxygen consumption rate and the heart rate were developed. The oxygen consumption rate and the heart rate could be expressed as a function of task variables; frequency and the weight of the load, and a personal variable, body weight, and their interactions. The coefficients of determination ($r^2$) of the model were 0.9777 and 0.9784, respectively, for the oxygen consumption rate and the heart rate. The model of oxygen consumption rate was modified to estimate the work load for the given oxygen consumption rate. The overall absolute percent errors of the validation of this equation for work load with the original data set was 39.03%. The overall absolute percent errors were much larger than this for the two models based on the US population. The models for the oxygen consumption rate and for the work load developed in this study work better than the two models based on the US population. However, without considering the biomechanical approach, the developed model for the work load and the two US models are not recommended to estimate the work loads for low frequent lifting activities.

• Fisheries and Aquatic Sciences
• /
• v.18 no.4
• /
• pp.373-378
• /
• 2015

Postprandial ammonia excretion and oxygen consumption in olive flounder Paralichthys olivaceus fed two different feed types, moist pellet (MP) and expanded pellet (EP) diets, to satiation were determined at $12^{\circ}C$, $15^{\circ}C$, $20^{\circ}C$, and $25^{\circ}C$ for 48 h. The ammonia excretion and oxygen consumption rates increased with increasing water temperature. However, the postprandial times for the maximum rates of ammonia excretion and oxygen consumption were shortened from 12 h to 6 h after feeding with increasing water temperature. The ammonia excretion and oxygen consumption rates of the fish fed EP were significantly higher (P < 0.05) than those fed MP at 12 h post-feeding both for $12^{\circ}C$ and $15^{\circ}C$. The highest (P < 0.05) weight-specific ammonia excretion rates at $12^{\circ}C$ were observed in the fish fed EP and MP at $12.1mg\;NH_3-N\;kg^{-1}h^{-1}$ and $8.7mg\;NH_3-N\;kg^{-1}h^{-1}$, respectively, for 12 h and 9 h after feeding. The highest (P < 0.05) weight-specific oxygen consumption rates at $12^{\circ}C$ were observed in fish fed EP and MP at $116.4mg\;kg^{-1}h^{-1}$ and $101.0mg\;kg^{-1}h^{-1}$, respectively, for 12 h after feeding. The highest ammonia excretion rates at $25^{\circ}C$ in the fish fed EP and MP increased to $16.9mg\;NH_3-N\;kg^{-1}h^{-1}$ and $18.3mg\;NH_3-N\;kg^{-1}h^{-1}$, respectively, for 6 h after feeding. The highest (P < 0.05) weight-specific oxygen consumption rates at $25^{\circ}C$ were observed in fish fed EP and MP at $184.3mg\;O_2kg^{-1}h^{-1}$ and $197.3mg\;O_2kg^{-1}h^{-1}$, respectively. These data are valuable for the design of biofilters and development of effluent treatment technologies for the land-based flounder farms.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.5
• /
• pp.548-553
• /
• 1999

A production of $\beta-Carotene$was attempted in a fed-batch culture of Blakeslea trispora by controlling both foam and dissolved oxygen in the presence of surfactant, Span 20. Results obtained from the shake flask cultures indicated that a high concentration of dissolved oxygen was needed for both cell growth and $\beta-Carotene$ synthesis, and the optimal concentration of glucose was found to be in the range of 50-100 g/l. In order to maintain the dissolved oxygen concentration level at higher than 50% of air saturation, pure oxygen was automatically sparged into the medium with air. Foam was controlled by bypassing air from the submerged aeration to the headspace in response to the foam that was caused by Span 20. High agitation speed was found to be detrimental to the cell growth due to shear damage, even though it provided sufficient dissolved oxygen. On the other hand, a low aeration speed caused stagnant regions in the fermentor because of improper mixing. Thus, for the fed-batch operation, agitation speed was increased gradually from 300 to 700 rpm to prevent cell damage at the initial stage of fermentation and to give efficient mixing for a viscous culture broth as the culture proceeded. By controlling dissolved oxygen and foam, a high concentration of $\beta-Carotene$otene (1,190 mg/l) was obtained in 6 days of the fed-batch culture of B. trispora with 2.5% of the dry cell weight, which was approximately 5 times higher than that of the batch cultures.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.5
• /
• pp.193-197
• /
• 2005

Highly c-axis oriented Zinc oxide (ZnO) films were successfully deposited at room temperature by oxygen ion-assisted pulsed filtered vacuum arc. The effect of oxygen gas ratio ($O_{2}/O_{2}+Ar$ on the preferred orientation, surface morphology and resistivity of the ZnO films were investigated. Highly crystalline ZnO films with (002) orientation were obtained at over $13\%$ of oxygen gas ratio. Increasing oxygen gas ratio up to $80\%$ was found to improve crystallinity of the films. From hall measurements, it was found that the film has n-type characteristic and carrier concentration and its mobility were closely related with oxygen gas ratio. Minimal resistivity of $3.6{\times}10^{-3}{\Omega}{\cdot}cm$ was obtained in the range of $20\%$ to $40\%$ of oxygen gas ratio.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.117-117
• /
• 2000

높은 광학적 투과성과 전기전도성을 갖는 ITO film은 solar cell같은 optoelectronic device나 휴대용 소형 TV, flat panel display 등의 투명전극으로 그 응용 분야가 광범위하여 많은 연구가 수행되어져 왔다. 기판으로서 유리를 사용할 때 생기는 활용범위 제한을 극복하고자 최근 유기물 위에 증착이 가능한 저온 증착방법에 대한 연구가 활발히 이루어지고 있다. 그 가운데 이온빔과 같은 energetic한 beam을 이용한 박막의 제조는 기판을 플라즈마 발생지역으로부터 분리시켜 이온빔의 flux 및 에너지, 입사각 등의 자유로운 조절을 통해 상온에서도 우수한 성질의 박막형성 가능성이 제시되어 지고 있다. ITO박막을 형성하는 방법 중 스프레이법이나 CVD법과 같은 화학적 증착방법은 증착시 350-50$0^{\circ}C$의 고온이 필요하고 현재 가장 많이 응용되어 지고 있는 sputter법은 15$0^{\circ}C$정도의 가열이 필요하므로 앞으로 응용가능성이 매우 커서 많은 연구가 진행중인 플라스틱과 아크릴 같은 flexible 한 기판위 증착에 적용이 불가능하다. 본 실험에서는 IBAD(Ion Beam Assisted Deposition)법을 이용하여 저온 ITO film을 유리와 유기막위에 증착하는 연구를 수행하였다. 유기막위에 증착된 ITO는 보다 가볍고 충격에 강하고 유리에 못지 않은 투과성을 가지고 있으나 현재 film의 quality 향상에 대한 요구가 증대되어 지고 있는 실정이다. 따라서, 본 실험에서는 dual oxygen ion gun의 조건변화에 따른 ITO film의 특성변화를 관찰하였다. 고정된 증？율에 한 개 ion gun에 ion flux를 고정시킨 후 또 다른 ion gun에서 발생하는 oxygen radical의 영향을 조사하였으며 oxygen radical의 rf power에 따른 변화는 OES(Optical emission spectroscopy)를 사용하였다. 너무 적은 oxygen ion beam flux나 oxygen radical은 film의 전도도 및 투과도를 저하시켰고 반면 너무 과도한 flux의 증가 시는 전도도는 감소하였고 투과도는 증가하는 경향을 보였다. 기판에 도달하는 oxygen ion flux는 faraday cup을 이용하여 측정하였으며 증착된 ITO film은 XPS, UV-spectrometer, 4-point probe를 이용하여 분석하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.171-171
• /
• 2000

차세대 반도체 제조에서 Design rule 이 점점 더 shrink 됨에 따라 shallow junction 분석의 중요성이 강조되고 있다. 이러한 shallow junction에 대한 분석방법중의 하나인 SIMS 분석에 있어서 depth resolution을 향상시키는 것이 중요하며, 일차이온의 에너지를 낮추어 줌으로써 이러한 효과를 달성할 수 있다. 그러나 최근의 연구에 따르면 O2+를 이용한 low energy SIMS 분석 시에 non-zero incidence angle로 분석할 경우 surface roughness가 발생한다는 사실이 보고되었으며, surface roughness를 줄이고 분석 초기의 transient region을 줄이기 위한 방법으로 oxygen flooding을 사용하는 경우 특정 각도에서 surface roughness가 여전히 존재할 뿐 아니라 분석 초기영역에서의 sputter rate이 변화하는 문제가 있음이 보고된바 있다. 본 연구에서는 2keV O2+ 일차이온을 이용하여 oxygen flooding 하에서 기존 조건인 60도 incidence로 분석하는 방법의 문제점을 파악하고 incidence angle을 45도로 바꾸어 분석하는 방법을 검토하였다. 그 결과 기존의 분석조건에서는 분석도중 표면부근에서 sputter rate이 변화하고 surface roughness가 증가하는 것을 확인하였고, 그로 인하여 oxygen flooding을 하지 않은 경우와 많은 차이가 발생하는 것을 발견하였다. Incidence angle을 45도로 바꾼 결과 이러한 문제가 해결되는 것을 확인하였으며, 특히 GaAs $\delta$layer 분석을 통하여 이 분석조건이 기존의 분석조건에 비하여 획기적으로 향상되는 것을 확인 할 수 있었다. 또한 여러 가지 shallow junction 분석을 통하여 이 분석방법이 상당히 신뢰성이 있음을 알 수 있었다. 그러나 여전히 oxygen flooding을 하지 않은 경우에 비하여 다소간의 차이가 있는 것이 발견되었는데, 이는 주로 표면에 잔존하는 산화막에 의한 효과와 oxygen flooding에서 보다 더 depth resolution이 좋음으로 인하여 발생하는 것으로 추정되었으며 그 밖에 다른 가능성도 제기되었다. 따라서 이 방법은 표면 산화막이 거의 없는 시료에 대하여 적용한다면 oxygen flooding을 하지 않은 경웨 비하여 transient region이 거의 없고 junction depth를 보다 신뢰성 있게 측정할 수 잇는 장점이 있는 것으로 판단되었다. As, P의 저 에너지이온 주입시료에 대해 이 분석방법을 적용할 경우 C+s 분석법에 비하여 depth resolution을 비교적 쉽게 향상시킬 수 있었고, oxygen follding을 쓰지 않은 경우에 비해서는 검출한도를 약 100배 정도 향상시킬 수 있었다. 그러나 2.5keV Cs+ 분석법에 비하면 아직 depth resolution이 불충분하여 실제로 shallow As 분석에 적용하기에는 다소 문제점이 있었다.

• Journal of Korean Society on Water Environment
• /
• v.26 no.1
• /
• pp.81-88
• /
• 2010

This study was conducted to find the capability of comparison of overall oxygen transfer coefficient in the membrane coupled high performance reactor (MPHCR) in treating high organic loading wastewater. Effluent quality had been analyzed while the influent organic loading rate was changed from 2 to $7kg\;COD/m^3{\cdot}day$. The oxygen transfer coefficients had been investigated using two-phase nozzle for operating variables which were internal circulation flowrate (5~8 L/min), air flow rate (0.0125~0.2 L/min), liquid temperature ($10{\sim}20^{\circ}C$), and pure-oxygen flow rate (0.0125~0.2 L/min). The overall oxygen transfer coefficient was increased with flowrate of internal circulation and air and high temperature. Especially, internal circulation flow rate showed distinct effect on overall oxygen transfer coefficient due to an increase of gas holdup and air-liquid contract area by two-phase nozzle. In the high range of organic loading rate from 4 to $7kg\;COD/m^3{\cdot}day$, the removable efficiency of COD was 91%. Conventional activated sludge process usually treat organic loading from 0.32 to $0.64kg\;COD/m^3{\cdot}day$ however, the MPHCR can treat 10 to 20 times higher if it would be compared to the conventional activated sludge process. Foaming problem often happened and caused biomass wash out of the reactor, therefore, the foaming should be controlled for the enhanced operation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.196-196
• /
• 2011

Molecular $N_2O$ has bee known to react over oxygen vacancy on a reduced rutile $TiO_2$(110)-1${\times}$1 surface to desorb as molecular $N_2$ leaving oxygen atom behind. In the present study, we investigated the reaction of $N_2O$ on rutile $TiO_2$(110) using temperature-programmed desorption (TPD). Our results indicate that $N_2O$ does not react over the oxygen vacancy under a typical UHV experimental condition. On a rutile $TiO_2$(110)-1${\times}$1 with a well-defined oxygen vacancy concentration of 5% ($2.6{\times}10^{13}/cm^2$), $N_2O$ desorption features show a monolayer peak maximum at 135 K followed by a small peak maximum at 170 K. When the oxygen vacancy is blocked with $H_2O$, the $N_2O$ peak at 170 K disappears completely, indicating that the peak is due to molecular $N_2O$ interacting with oxygen vacancy. The integrated amount of desorbed $N_2O$ plotted against the amount of adsorbed $N_2O$ however shows a straight line with no offset indicating no loss of $N_2O$ during our cycles of TPD measurements. In addition, our $N_2O$ uptake measurements at 70~100 K showed no $N_2$ (as a reaction product) desorption except contaminant $N_2$. Also, $H_2O$ TPD taken after $N_2O$ scattering up to 350 K indicates no change in the vacancy-related $H_2O$ desorption peak at 500 K showing no change in the oxygen vacancy concentration after the interaction with $N_2O$.

• Korean Journal of Materials Research
• /
• v.1 no.4
• /
• pp.184-190
• /
• 1991

Oxygen chemisorption on single crystal ZrC(111) surface was studied by high-resolution electron energy loss and ultraviolet photoelectron spectroscopy. At a low amount of oxygen exposure, adsorbed oxygen atoms construct $(\sqrt{3}{\times}\sqrt{3})R30^{\circ}$ structure. On the other hand, oxygen adsorption changes into $1{\times}1$ structure as the amount of oxygen exposure increases. The adsorbed oxygen atoms show smaller vertical distance from the Zr topmost layer in the $1{\times}1$ structure than in the $(\sqrt{3}{\times}\sqrt{3})R30^{\circ}$ structure and approach to the bridge site rather than 3-fold hollow site. The two different oxygen adsorption behavior comes from the two different surface stales of the clean ZrC(111) surface.

• Korean Journal of Materials Research
• /
• v.2 no.2
• /
• pp.119-125
• /
• 1992

Oxygen segregation in horizontal-magnetic-field-applied Czochralski (HMCZ) silicon crystals has been studied as a function of magnetic field strength (B) and crucible rotation rate (C). Along the axis of 57mm din. <100> crystals grown under B=2, 3, 4 kG and C=4-15rpm, the oxygen distribution was usually saw-tooth shaped and fluctuated unevenly. Compared to the conventional CZ method, this result seems to indicate that the horizontal magnetic field, at levels used in the present experiment, had a destabilizing influence on oxygen transport to the growth interface. On the other hand, as C increased, the oxygen fluctuation lessened, and [0] increased overall. At B=2 kG, an oxygen profile in a level of 27-36 ppma was achieved by a programmed ramp of C. Oxygen precipitation behavior of the HMCZ silicon during a simulated device manufacturing process was compared and found to be inferior to that of typical CZ silicon. The uneven oxygen profile in the as-grown state was identified as the major source of poor precipitation uniformity in the HMCZ silicon.