• 자원리싸이클링
• /
• 제17권2호
• /
• pp.46-54
• /
• 2008

폐 컴퓨터나 OA기기 중 PCB (Printed Circuit Board)에는 귀금속을 포함한 많은 양의 금속성분이 함유되어 있으며, 본 연구에서는 이들을 분리회수하기 위한 건식처리 기술을 검토하였다. 폐 컴퓨터로부터 얻은 PCB 스크랩을 산화처리한 시료에 대해 정량분석을 실시하고, 함유된 산화물 종류에 대하여 적합한 슬래그계를 선정하여 유가금속을 분리회수하기 위한 산화물 성분의 슬래그화를 시도하였다. 용융작업을 위해 슈퍼칸탈 회전로를 사용하였으며, 이때 도가니 회전이 금속의 회수율에 미치는 영향을 조사하였다.

• 환경위생공학
• /
• 제15권3호
• /
• pp.88-93
• /
• 2000

VOCs의 촉매산화 공정에서 다성분 VOCs 혼합물의 간섭효과와 독성저감에 고나해 연구를 수행하였다. VOCs로는 benzene, toluene, styrene을 선정하였고, 0.5% $Pt/{\gamma}-Al_2O_3$를 촉매로 사용하였다. 각 VOCs의 반응성은 치환기의 종류에 따라 결합력이 다르기 때문에 benzene > toluene > styrene의 순으로 완전산화 반응이 잘 진행되었다. VOCs의 혼합물의 경우 각 VOCs는 서로 억제제로 작용하여 오나전산화 전환율을 감소시켰는데 이는 촉매표면에 각각의 VOCs가 경쟁 흡착하기 때문으로 styrene > toluene > benzene의 순으로 간섭효과가 크게 나타나는 것을 확인할 수 있었다. 이성분계 혼합 VOCs의 경우 혼합비에 따른 완전산화 전환율은 간섭효과가 작은 VOCs의 경우 상대 VOCs의 농도가 작을수록 전환율이 크게 나타났으며, 간섭효과가 큰 VOCs의 경우에는 상대 VOCs의 농도에 관계없이 자신의 부분농도에 반비레하는 현상을 보였다. 따라서 VOCs의 독성저감 기술로 촉매산화공정을 추천할 수 있으며, 실제공정과 같은 혼합물의 경우에도 단일성분의 전환특성과 혼합물의 간섭효과로부터 공정조건을 예측할 수 있을 것으로 사료된다.

• 한국연소학회지
• /
• 제18권4호
• /
• pp.44-52
• /
• 2013

Important role of chemical interaction in flame extinction was numerically investigated in downstream interaction among lean(rich) and lean(rich) premixed as well as partially premixed $H_2$-air and CO-air flames. The strain rate varied from 30 to $5917s^{-1}$ until interacting flame could not be sustained anymore. Flame stability diagrams mapping lower and upper limit fuel concentrations for flame extinction as a function of strain rate are presented. Highly stretched interacting flames were survived only within two islands in the flame stability map where partially premixed mixture consisted of rich $H_2$-air flame, extremely lean CO-air flame, and a diffusion flame. Further increase in strain rate finally converges to two points. Appreciable amount of hydrogen in the side of lean $H_2$-air flame also oxidized the CO penetrated from CO-air flame, and this reduced flame speed of the $H_2$-air flame, leading to flame extinction. At extremely high strain rates, interacting flames were survived only by a partially premixed flame such that it consisted of a very rich $H_2$-air flame, an extremely lean CO-air flame, and a diffusion flame. In such a situation, both the weaker $H_2$-air and CO-air flames were parasite on the stronger diffusion flame such that it could lead to flame extinction in the situation of weakening the stronger diffusion flame. Particular concerns are focused on important role of chemical interaction in flame extinction was also discussed in detail.

• 폴리머
• /
• 제38권4호
• /
• pp.518-524
• /
• 2014

용융전기방사법은 유기용매를 사용하지 않아 용액전기방사법에 비하여 친환경 기술로 관심을 받고 있다. 그러나 용융전기방사법으로 제작된 섬유의 직경은 수 마이크론에서 수십 마이크론에 이르고 있어 그 응용성에 제한을 받고 있다. 본 연구에서는 자체 제작한 용융전기방사 장비를 사용하여 용융점도에 따른 방사섬유의 직경의 변화를 체계적으로 연구하였다. 장비가 허용하는 온도 범위에서 방사 가능한 용융점도를 갖도록 저밀도 폴리에틸렌에 폴리에틸렌모노알콜과 폴리에틸렌 왁스를 혼합하여 실험에 사용하였다. 이 고분자 혼합물들을 사용하여 용융점도의 변화에 따라 수 마이크론에서 수십 마이크론까지의 크기를 가진 고른 표면의 섬유를 제조할 수 있었다. 또한 산화된 폴리에틸렌 왁스를 혼합물에 사용하여 고분자의 극성에 따른 직경의 변화를 관찰하였다. 부가적으로 인가 전압과 방사 거리 등이 방사섬유의 직경에 미치는 영향을 조사하였다.

• 한국세라믹학회지
• /
• 제19권3호
• /
• pp.179-186
• /
• 1982

This research is to aim at the study of sintering mechanism through the observation of microstructure by scanning electron microscopy, after the mixture of 30wt% $Al_2O_3$ (White Alundum) powder is fired in air at the temperature range of 1350~150$0^{\circ}C$ in order to sinter $Al_2O_3$-Al through the oxidation of Al powder. The results obtained in this experiment are as follows: 1. While the compressive strength of $Al_2O_3$(WA) body fired at $1450^{\circ}C$ for 5hrs in air is 150kg/$\textrm{cm}^2$, that of Al-$Al_2O_3$ body fired at 135$0^{\circ}C$, $1400^{\circ}C$ for 5hrs in air is 1100kg/$\textrm{cm}^2$, 1600kg/$\textrm{cm}^2$ respectively, and the higher the firing temperature, the more the compressive strength increases. These results from the sintering effect between $Al_2O_3$(WA) grains and surrounding Al-oxidation layer. 2. While the compressive strength of Al2O3(WA) body fired at 150$0^{\circ}C$ for 5hrs in air is 250kg/$\textrm{cm}^2$, the compressive strength of Al-$Al_2O_3$body fired under the same condition is 2050kg/$\textrm{cm}^2$ and water absorption 9.0%, porosity 23.3%, bulk density 2.60gr/$cm^3$. It is assumed that these results come from not only the grain growth of oxidized Al grains but also the increase of bonding strength between $Al_2O_3$(WA) grains.

• BMB Reports
• /
• 제29권1호
• /
• pp.81-87
• /
• 1996

The relationship of S-thiolation and oxidation of glycogen phosphorylase b and peroxidation of phosphatidyl choline liposome by xanthine oxidase (XOD), 2,2'-azobis(2-amidinopropane) hydrochloride (AAPH), and 2,2'-azobis(dimethylvaleronitrile) (AMVN)-generated free radicals was investigated, Glycogen phosphorylase b was S-thiolated in the presence of glutathione and oxidized in the absence of it by XOD, AAPH and AMVN. In XOD-initiated reaction, the rates of S-thiolation and oxidation of phosphorylase were very similar and addition of liposome to the reaction mixture showed little inhibition of the modifications. In AAPH-initiated reaction, the rate of oxidation was higher than that of S-thiolation and addition of liposome increased oxidation of the protein but had no effect on S-thiolation. In AMVN-initiated reaction, S-thiolation was higher than oxidation and addition of liposome increased S-thiolation remarkably but showed no effect on oxidation. The effect of liposome on modifications of protein in AAPH and AMVN reaction seemed to be caused by certain reactive degradation products or intermediates of liposome by free radical attack. Peroxidation of liposome was not observed in XOD-initiated reaction. Liposome was gradually peroxidized by AAPH reaction. The peroxidation was inhibited by addition of GSH and phosphorylase. Peroxidation of liposome by AMVN was extreamly fast, and was not affected by GSH and phosphorylase.

• 한국자기학회지
• /
• 제13권3호
• /
• pp.91-96
• /
• 2003

본 연구에서는 DC 마그네트론 스퍼터를 사용하여 Cr/Co/Al-Ox/Co/Ni-Fe 다층박막에 다양한 두께의 Cr 하지층을 삽입함에 따른 자기적 특성 및 전기적 특성에 관하여 연구하였다. 3 nm 두께의 Cr 하지층 증착시 자기저항비의 변화는 관찰할 수 없었고 적정한 Cr두께가 증가함에 따라 Co의 보자력이 크게 증가되었다 또한, 산화시간이 길수록 두 강자성층간에 보자력 차이 및 절연층의 저항이 점차 증가하였는데, 이는 산화시간에 따라 상부층 계면의 평탄성의 증가에 기인하는 것으로 생각되며 TEM을 통하여 확인할 수 있었다. Cr 하지층 유무에 관계없이 최고 자기저항비가 나타나는 절연층의 산화시간은 60~70초로 비슷하였지만 Cr 두께가 증가할수록 자기저항비는 감소하였다. 이는 전극간 계면의 거칠기의 증가로 인해 미반응 Al의 잔존 확률이 상대적으로 커짐에 따라 터널 전자의 산란이 증가함으로써 나타나는 것으로 생각된다. 이러한 결과로 Cr하지층의 두께는 3 nm로 고정하였으며 하지층의 증착 및 적정산화를 통하여 두 강자성층간에 큰 보자력 차이를 유도할 수 있었다. 이는 재현성에 있어서 가장 큰 문제점을 지닌 TMR 소자에 매우 긍정적인 해결방안을 제시할 수 있게 된다.̄

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권8호
• /
• pp.3473-3477
• /
• 2015

Plants and their by-products offer a diverse mixture of chemical constituents like natural antioxidants. Date-pits are rich in phenolic compounds that have antioxidant potential. The main objective of this study was to investigate the protective effect of a date-pit extract (DPE) against AOM-induced colonic carcinogenicity and oxidative stress. Thirty-two weanling male Sprauge-Dawley rats were randomly divided into four groups (eight rats in each group). All rats were fed basic diet and water ad libitum, and randomly distributed per treatment groups as follows: negative controls injected with normal saline once a week for two weeks, a cancer group injected intra-peritoneally with azoxymethane (15mg/kg body weight) for two consecutive weeks, and DPE treated groups receiving the extract via the oral route (1.5ml/day) for the entire experiment in the presence or absence of AOM injection. Results showed that DPE contained phytonutrients that were capable of inhibiting chemically-induced oxidative stress in the rat colonic cells. In those animals that consumed DPE, a protective effect was observed against AOM-induced oxidative stress in rat colonic cells as evident by a significant decrease in MDA and oxidized DCF formation in AOM injected and DPE fed groups. It is concluded that DPE has potential antioxidant and anticarcinogenic properties.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.135-136
• /
• 1998

By the ion bombardment the original discrete layered structure is damaged and a uniformly mixed layer is formed by the intermixing of the films. Immediately after this dynamic cascade mixing a structure of this mixed layer is likely to be a mixture of randomly distributed atoms. Subsequently the mixed layered structure becomes a non-equilibrium structure such as the metastable pphase because the kinetic energies of the incident ions rappidly dissippate and host atoms within the collision cascade region are quenched from a highly energetic state. The formation of the metastable transition metal alloys using ion-beam-mixing has been extensively studied for many years because of their sppecific ppropperties that differ from those of bulk materials. in ion-beam-mixing the alloy or comppound is formed due to the atomic interaction between different sppecies during ion bombardment. in this study the metastable pphase formed by ion-beam-mixing pprocess is comppared with equilibrium one by arc-melting method by GXRD and XAS. Therfore we studied the fundamental characteristics of charge redistribution uppon alloying and formation of intermetallic comppounds. The multi-layer films were depposited on a wet-oxidized Si(100) substrate by sequential electron beam evapporation at a ppressure of less than 5$\times$10-7 Torr during depposition. These compprise 4 ppairs of Co and ppt layers where thicknesses of each layer were varied in order to change the alloy compposition.

• 한국응용과학기술학회지
• /
• 제20권2호
• /
• pp.94-100
• /
• 2003

We studied electrochemical characteristics of Langmuir-Blodgett(LB) films by using cyclic voltammetry with a three-electrode system. An Ag/AgCl as a reference electrode, a platinum wire as a counter electrode and LB film-coated indium tin oxide(ITO) as a working electrode were used to study electrochemical characteristics at a various concentration of $NaClO_4$ solution. LB films were reduced from initial potential to -1350 mV, continuously oxidized to l650mV and returned to the initial point. The scan rate was l00mV/s. The monolayer surface morphology of the LB film have been measured by Atomic Force Microscope(AFM). As a result, We comfirmed that the microscopic properties of LB film by AFM showed the good orientation of momolayer molecules and the thickness of monolayer was 3.5-4.lnm. The cyclic voltammograms(CV) of the ITO-coated glass showed the peak potentials for the reduction-oxidation reation. LB films of 4-octyl-4'-(5-carboxypentamethyleneoxy) azobenzene(8A5H) / L-${\alpha}$-phosphayidyl choline, dilauroyl(DLPC) seemed to be irreversible process caused by only the oxidation current from the cyclic voltammogram. The current of oxidatation increased at cyclic voltammogram by increasing 8A5H density in LB films. The diffusivity(D) of LB films increased with increasing of a 8A5H amount and was inversely proportional to the concentration of $NaClO_4$ solution.