• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.267-270
• /
• 2006

Polyethylene-GOX 조합 추진제를 이용한 소형 하이브리드 로켓 모터의 연소 특성에 관한 연구를 수행하였다. 그레인 두께에 대하여 평균화된 여러 형태의 상관관계식을 실험 결과와 비교하였으며, 연료 발생율은 연소실로 유입되는 산화제 유량율에 대하여 크게 변화지 않는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.671-674
• /
• 2003

Generally, $TiO_2$ powders absorb ultraviolet rays and make oxidation/reduction reactions on its surface. Hydroxide radical(OH), a product of photocatalyst reactions, has so strong oxidation/reduction electric potential that it can oxidize noxious gas like NOx. In this study, $TiO_2$ was substituted for cement to investigate the purifying degree of NOx. Rutile and anatase types of $TiO_2$ were used as photocatalyst. The sun rays and the ultraviolet were used as a light source. Anatase type $TiO_2$ was better than rutile type in purifying performance. The sunray showed the best purifying performance among the light sources. 3% substitution of TiO$_2$ with the sunray was enough to purify NOx efficiently.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.921-926
• /
• 1997

SOI(Silicon On lnsulator) technology is many advantages in the gabrication of MOS(Metal-Oxide Semiconductor) and CMOS(Complementary MOS) structures. These include high speed, lower dynamic power consumption,greater packing density, increased radiation tolearence et al. In smiple form of bonded SOL wafer manufacturing, creation of a bonded SOI structure involves oxidizing at least one of the mirror polished silicon surfaces, cleaning the oxidized surface and the surface of the layer to which it will be bonded,bringing the two cleanded surfaces together in close physical proximity, allowing the subsequent room temperature bonding to proceed to completion, and than following this room temperature joining with some form of heat treatment step,and device wafer is thinned to the target thickness. This paper has been performed to investigate the possibility of the bonded SOI wafer manufacturing Especially, we focused on the bonding quality and thinning method. Finally,we achieved the bonded SOI wafer that Si layer thickness is below 3 .mu. m and average roughness is below 5.angs.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.275-280
• /
• 2001

Typically, manganese (II) ions are incompletely removed from water as $MnO_2$ on increasing the pH of the water to 10. The water then has to be neutralized before it can be used. We propose a new and effective method for removing Mn (II) from water using a new combination of symbiotic microbes consisting of manganese-oxidizing bacteria and filamentous algae. The microbes rapidly oxidize Mn(II) to Mn (IV) at a neutral pH with no organic matter required as a nutrient and $MnO_2$is precipitated immediately. This differs from the use of heterotrophic manganese-oxidizing bacteria where organic nutrients are required. Our results suggest that this method will be useful in developing new systems for removal of manganese(II) ions from industrial and mining wastewater and drinking water. In addition, there are other possibilities such as recycling of dry batteries which are presently discarded without treatment

• Bulletin of the Korean Chemical Society
• /
• 제27권8호
• /
• pp.1203-1205
• /
• 2006

During the synthesis of 4-fluorobenzaldehyde via the SNAr reaction of 4-nitrobenzaldehyde with TBAF, it was found that an equivalent amount of TBAF could oxidize benzaldehyde to benzoic acid. The reaction of 4-nitrobenzaldehyde with tetrabutylammonium fluoride (TBAF) gave 4-nitrobenzoic acid in high yield. Depending on the reaction conditions, other aromatic aldehydes produced acids with fewer amounts of alcohols. However, this type of oxidation has limited practical applications. Nevertheless, the mechanism is quite different from the Cannizzaro reaction because the amounts of the acid salt and alcohol formed were different.

• 산업기술연구
• /
• 제35권
• /
• pp.59-65
• /
• 2015

As the fossil fuels are depleted nowadays, development of alternative energies is absolutely required in the world. Efficient production of hydrogen by water-splitting using solar energy can be one of the methods to solve the global energy and environmental problems. But this method has a problem of low conversion efficiency. The application of graphene can be one method to help increase the conversion efficiency. For this reason, mass production of high quality graphene is required. In this study, we prepared graphene using the chemical exfoliation method. We applied the Hummer's method and Tour's method to oxidize the graphite and could get the different Graphene Oxide(GO) from different process conditions. We also tried to convert the GO to graphene by thermal reduction and could remove functional group of GO effectively. The control of oxidation conditions was quite important to obtain the high quality graphene.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권1호
• /
• pp.48-52
• /
• 2000

An autotrophic sulfur oxidizer, Thiobacillus sp. ASWW-2, was isolated from activated sludge, and its sulfur oxidation activity was characterized. Thiobacillus sp. ASWW-2 could oxidize elemental sulfur on the broad range from pH 2 to 8. When 5-50 g/L of elemental sulfur was supplemented as a substrate, the growth and sulfur oxidation activity of Thiobacillus sp. ASWW-2 was not inhibited. The specific sulfur oxidation rate of strain ASWW-2 decreased gradually until sulfate was accumulated in medium up to 10 g/L. In the range of sulfate concentration from 10 g/L to 50 g/L, the sulfur oxidation rate could keep over $2.0g-S/g-DCW{\cdot}d$. It indicated that Thiobacillus sp. ASWW-2 has tolerance to high concentration of sulfate.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1618-1620
• /
• 1996

A variety of processing techniques have been reported for preparing high quality functional thin films, and one of the most successful techniques has been known to be the rf FTMS(facing targets magnetron sputtering) method. The rf FTMS has preferable advantages to reduce the resputtering effect when depositing thin films and efficiently to oxidize the grown films by oxygen radicals. The resulting optimum conditions were found to be the rf power 50 W and the substrate position of 20 mm.

• 대한기계학회논문집B
• /
• 제22권11호
• /
• pp.1538-1546
• /
• 1998

The aim of this study is to investigate the characteristics of the catalytic burner to bum LPG and toluene alternately which can be applied to the dryer of an acryl coating process of textile. It was difficult to obtain complete conversion when the catalytic burner was installed to downward direction. The catalytic burner was improved by introducing the forced diffusion combustion air and the premixing air. The optimal operating conditions for the newly improved catalytic burner were obtained. The catalytic burner for toluene mixture was also investigated to incinerate toluene mixture exhausted from drying process. Results showed that the catalytic burner could oxidize toluene mixture completely at the proper operating conditions. Finally, the catalytic burner to bum LPG and toluene alternately was applied to the dryer of acryl coating. By using the catalytic burner, benefits of energy savings and environmental protection were obtained.

• 미생물과산업
• /
• 제18권3호
• /
• pp.23-33
• /
• 1992

The general characteristics of campylobacters and related organisms (e.g., species of the genera Helicobacter and Wolinella, Bacteroides ureolyticus, and Bacteroides gracilis) are as follows: slender, non-sporeforming, gram-negative, vibroid bacteria (helical- or spiral- shpaed; except that B. ureolyticus and B. gracilis are straight-rod), 0.2-0.5 .mu.m in width and 0.5 .mu.m in length. (Smibert, 1984; Penner, 1988). The species of genus Campylobacter and related organisms are chemoorganotrophs; however, they neither oxidize nor ferment carbohydrates and instead obtain energy from amino acids, the salts of tricarboxylic acids (TCA) cycle intermediates, the salts of organic acids, or, in some species, H$\_$2/. With regard to their oxygen responses for growth, they all are microaeophilic i.e., they are capable of oxygen-dependent growth (respiring with oxygen as a terminal electron acceptor) but can not grow in the presence of a level of oxygen equivalent to that present in an air atmosphere (21% oxygen). This review will take interests in how these microorganisms response to oxygen for growth and what repiratory types they have.