• Korean Chemical Engineering Research
• /
• 제47권1호
• /
• pp.79-83
• /
• 2009

본 연구에서 고밀도 플라즈마 식각 장치를 사용한 비정질 실리콘 막의 게이트 전극선 형성공정에서 여러 가지 식각 변수가 치수 제어와 식각 속도 및 식각 선택비 등 식각 특성에 미치는 영향을 분석하였다. $Cl_2/HBr/O_2$로 구성된 식각 기체의 전체 유량을 증가시키면 비정질 실리콘의 식각 속도가 증가하나 식각 전후의 형상치수는 변화없이 거의 일정하였다. 전체 유량을 고정시키고 $Cl_2$와 HBr 간의 유량비를 변화시키면 HBr의 유량이 커질수록 비정질 실리콘의 식각 속도가 감소하였다. $O_2$의 유량을 증가시키면 산화막의 식각 속도가 상대적으로 낮아져 식각 선택비를 증가시켜 식각 공정의 안정성을 높이나 게이트 전극선을 경사지게 하는 특성을 보인다. Source power의 증가는 비정질 실리콘 식각 속도의 증가와 더불어 형상치수의 증가를 가져오며, bias power의 증가는 비정질 실리콘과 산화막의 식각 속도를 증가시키나 식각 선택비를 크게 감소시키는 경향을 보였다.

• 한국자동차공학회논문집
• /
• 제20권5호
• /
• pp.71-80
• /
• 2012

To improve the $NO_X$ conversion over a SCR (selective catalytic reduction) catalyst, the DOC (diesel oxidation catalyst) is usually placed upstream of the SCR catalyst to enhance the fast SCR reaction ($4NH_3+2NO+2NO_2{\rightarrow}4N_2+6H_2O$) using equimolar amounts of NO and $NO_2$. Here, a ratio of $NO_2/NO_X$ above 50% should be avoided, because the reaction with $NO_2$ only ($4NH_3+4NO+O_2{\rightarrow}4N_2+6H_2O$) is slower than the standard SCR reaction ($4NH_3+4NO+O_2{\rightarrow}4N_2+6H_2O$). In order to accurately predict the performance characteristics of SCR catalysts, it is therefore desired to develop a more simple and reliable mathematical and kinetic models on the oxidation kinetics of nitric oxide over a DOC. In the present work, the prediction accuracy and limit of three different chemical reaction kinetics models are presented to describe the chemicophysical characteristics and conversion performance of DOCs. Steady-state experiments with DOCs mounted on a light-duty four-cylinder 2.0-L turbocharged diesel engine then are performed, using an engine-dynamometer system to calibrate the kinetic parameters such as activation energies and preexponential factors of heterogeneous reactions. The reaction kinetics for NO oxidation over Pt-based catalysts is determined in conjunction with a transient one-dimensional (1D) heterogeneous plug flow reactor (PFR) model with diesel exhaust gas temperatures in the range of 115~$525^{\circ}C$ and space velocities in the range of $(0.4{\sim}6.5){\times}10^5\;h^{-1}$.

• 한국재료학회지
• /
• 제23권5호
• /
• pp.271-275
• /
• 2013

Cobalt (Co) compounds have been used for centuries to impart rich blue color to glass, glazes and ceramics. Cobalt monoxide (CoO), an oxide of Co, is an inorganic compound that has long been used as a coloring agent in the ceramic industry. Unlike other coloring agents, CoO can be used to develop colors other than blue, and several factors such as its concentration in the glaze and firing condition have been suggested as possible mechanisms. For example, CoO produces a typical blue color called "cobalt blue" at very low concentrations such as 1 wt% in both oxidation and reduction firing conditions; a higher concentration of CoO (5 wt%) develops a darker blue color under the same firing conditions. Interestingly, CoO also develops a purple color at high concentrations above 10 wt%. In this study, we examined the applicability and mechanism of a novel purple glaze containing cobalt(II, III) oxide, one of the well characterized cobalt oxides. Experimental results show that an Augite crystal isoform (Augite-Fe/Co) in which Fe was replaced with Co is the main component contributing to the formation of the purple color. Based on these results, we developed a glaze using chemically synthesized Augite-Fe/Co crystal as a color pigment. Purple color glaze was successfully developed by the addition of 6~15 wt% of $Co_3O_4$ to magnesia lime.

• Biomolecules & Therapeutics
• /
• 제20권1호
• /
• pp.96-103
• /
• 2012

In the present study, the inhibitory effect of neem leaf extract (NLE) on lipopolysaccaride (LPS)-induced nitric oxide (NO) and tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$) production was examined both in vitro and in vivo. In vitro study revealed that NLE treatment ($100{\mu}g/ml$) inhibits LPS (100 ng/ml)-induced NO production by 96% and TNF-${\alpha}$ production by 32%. The reduction in NO production is probably conferred by the complete suppression of inducible nitric oxide synthase (iNOS) expression. Interestingly, in vivo NLE significantly improved the survival rate of mice in an experimental sepsis model. Administration of NLE (100 mg/kg) 24 h before LPS treatment (20 mg/kg) improved the survival rate of mice by 60%. The inhibition of plasma NO and TNF-${\alpha}$ production by NLE is likely to account for the improved survival of mice. Our results suggest that NLE may present a promising avenue in the development of therapeutic agents for the treatment of inflammatory diseases.

• 센서학회지
• /
• 제10권6호
• /
• pp.310-316
• /
• 2001

다양한 냄새를 인식하고 분석하기 위하여 metal oxide 형 센서어레이를 이용한 인공 냄새인식 시스템(전자 코 시스템)을 설계 제작하였다. 센서어레이로부터 측정되는 다차원 데이터를 관측자로 하여금 쉽게 구별 할 수 있도록 Euclidean distance를 기본으로 하는 unsupervised clustering 방법을 제안한다. 제안된 방법은 주성분 분석법을 Sammon의 매핑법을 시작점으로 사용한 결합방법으로 특정냄새가 속해있는 cluster들에 대한 가정이 필요하지 않으며, 주성분 분석법에서 나타나는 차원축소로 인한 오차를 최소화하고 Sammon의 매핑법 사용으로 나타나는 데이터베이스의 입력순서에 따른 cluster들의 회전현상을 제거할 수 있다. 제안된 unsupervised clustering 방법으로 구현된 인공 냄새인식 시스템은 휘발성 유기화합물과 국산양주들의 냄새 차이를 각각 평가하는데 사용되어졌고 실험을 통하여 좋은 성능을 검증하였다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1995년도 춘계학술발표회 초록집
• /
• pp.45-52
• /
• 1995

광 촉매로 널리 알려진 TiO$_2$의 광 분해 거동의 변화를 관찰하기 위하여 Nb$_2$O$_{5}$를 첨가하여 sol-gel 용법으로 제조한 후 DCA(dichloroacetic acid) 의 광분해 효율을 측정하였다. Sol-gel process 과정에서 첨가된 Nb$_2$O$_{5}$의 농도 및 열처리 온도변화에 따른 광분해 효율을 관찰한 결과, Nb$_2$O$_{5}$를 첨가한 후 40$0^{\circ}C$에서 한시간 동안 열처리 한 광 촉매의 광분해 효율이 가장 높게 나타났다. 또한 열처리 온도와 무관하게 Nb$_2$O$_{5}$의 양이 증가할수록 광분해 효율은 감소하는 것으로 관찰되었다. 이는 excess electron 의 증가로 환원 반응 혹은 recombination rate기 증가하기 때문이라고 사료된다. 분해 대상 물질의 pH가 낮을수록 광분해 효율이 증가하는 것을 알 수 있었다.알 수 있었다.

• 한국분무공학회지
• /
• 제25권1호
• /
• pp.21-26
• /
• 2020

The objective of this work is to numerically reveal the effect of equivalence ratio change on the simultaneous reduction of NO_X and soot emissions from the simulated-EGR compression ignition engine containing CO₂. An experiment was conducted by using a single-cylinder common-rail injection system engine, an intake control system, and exhaust emissions analyzers. The numerical analysis results were validated under the same experimental conditions. To investigate the effect of equivalence ratio by simulated-EGR containing CO₂, the O₂, N₂, and CO₂ mole fraction were changed in the initial air conditions to the cylinder. The results were analyzed in terms of peak cylinder pressure, indicated mean effective pressure, indicated specific nitrogen oxide, and indicated specific soot. It was revealed that ignition delay characteristics and heat release rate (ROHR) characteristics were not significantly different according to the equivalence ratio. However, as the equivalence ratio increased from 0.68 to 0.83, the maximum combustion pressure and IMEP decreased by about 6.5% and 9.4%, respectively. In the case of ISFC, as is well known, the trend is opposite of IMEP. In the case of ISNO, as the equivalence ratio increased, less NO was generated, and as the equivalence ratio increased by 0.05, the ISSoot value of about 10% increased.

• Journal of Welding and Joining
• /
• 제26권4호
• /
• pp.50-54
• /
• 2008

In this research, anode for SOFC has been manufactured from two different kinds of feedstock materials through thermal spraying process and the properties of the coatings were characterized and compared. One kind of feedstock was manufactured from spray drying method which includes nano-components of NiO, YSZ (300 nm) and graphite. And the other is manufactured by blending the micron size NiO coated graphite, YSZ and graphite powders as feedstock materials. Microstructure, mechanical properties and electrical conductivity of the coatings as-sprayed, after oxidation and after hydrogen reduction containing nano composite which is prepared from spray-dried powders were evaluated and compared with the same properties of the coatings prepared from blended powder feedstock. The coatings prepared from the spray dried powders has better properties as they provide larger triple phase boundaries for hydrogen oxidation reaction and is expected to have lower polarization loss for SOFC anode applications than that of the coatings prepared from blended feedstock. A maximum electrical conductivity of 651 S/cm at $800^{\circ}C$ was achieved for the coatings from spray dried powders which much more than that of the average value.

• 한국농공학회논문집
• /
• 제60권1호
• /
• pp.79-87
• /
• 2018

Water management impacts both methane ($CH_4$) and nitrous oxide ($N_2O$) emissions from rice paddy fields. Although irrigation is one of the most important methods for reducing $CH_4$ emission in rice production systems it can also $N_2O$ emissions and reduce crop yields. A feasibility study on the system of rice intensification (SRI) methods with respect to irrigation requirements, greenhouse gas (GHG) emissions was conducted for either 2 or 3 years depending on the treatment in Korea. The SRI methods (i.e. SRI and midsummer drainage (MD) with conventional practice (CT)) reduced the irrigation requirement by 49.0 and 22.0 %, respectively. Global warming contribution of GHG to different depending on the type of GHG. Therefore, the emission of $CH_4$ and $N_2O$ shall be converted to Global Warming Potential (GWP). The GHG emission from the conventional practice with midsummer drainage (MD) and the SRI plots, in GWP were reduced by 49.1 and 77.1 %, respectively. Application of SRI water management method could help to improve Korea's water resources and could thus contribute to mitigation of the negative effects of global warming.

• Journal of Microbiology and Biotechnology
• /
• 제27권2호
• /
• pp.219-225
• /
• 2017

An aqueous chlorine dioxide ($ClO_2$) treatment combined with highly activated calcium oxide (CaO) and mild heat was tested for inactivating naturally existing bacteria and Escherichia coli O157:H7 inoculated on fresh-cut kale. Kale samples were treated with different concentrations of $ClO_2$ (10, 30, and 50 ppm), CaO (0.01%, 0.05%, 0.1%, and 0.2%), and mild heat ($25^{\circ}C$, $45^{\circ}C$, $55^{\circ}C$, and $65^{\circ}C$) as well with combinations of 30 or 50 ppm $ClO_2$ and 0.2% CaO at $55^{\circ}C$ for 3 min. An increasing concentration of $ClO_2$ and CaO significantly reduced the microbial population compared with the control. In addition, mild heating at $55^{\circ}C$ elicited greater microbial reduction than the other temperatures. A combined treatment of 50 ppm $ClO_2$ and 0.2% CaO at $55^{\circ}C$ reduced the population of naturally existing bacteria on kale by 3.10 log colony forming units (CFU)/g, and the counts of E. coli O157:H7 were below the detection limit (1 log CFU/g). In addition, no significant differences in the Hunter color values were evident in any treatment during storage. Therefore, a combined treatment of $ClO_2$ and active CaO at $55^{\circ}C$ can be an effective sanitizing method to improve the microbiological safety of fresh-cut kale without affecting its quality.