프러시안 블루 유사체(Prussian Blue Analogue : PBA)는 3차원 구조와 기공을 갖는 금속-유기골격체이며, 유기 리간드의 종류에 따라 다양한 구조를 갖는다. PBA는 바이오센서, 광학, 촉매, 수소 저장 장치 등의 분야에서 주목 받고 있으며 화학적 안정성을 가진 환경 친화적인 물질이다. 또한 다양한 크기의 미세기공을 조정할 수 있어 흡착분야에서 많이 활용되고 있다. 본 연구는 수열합성법을 이용하여 금속유기골격체인 $Mn_3[Fe(CN)_6]_2$를 합성하였다. 전구체로 $K_4[Fe(CN)_6]$와 $MnCl_2$를 사용하였고, 합성된 물질은 소성하여 망간철산화물을 생성하였다. 실험 변수로 전구용액의 pH, 전구체의 몰농도, 반응시간을 조절하여 입자의 크기와 형태에 대한 영향을 확인하였다. 합성된 다공체는 XRD, SEM, FT-IR, UV-Vis, TG/DTA에 의해 분석하였고, 여러 염료에 대한 흡착 특성을 평가하였다.
Ni-MH 전지의 음극으로 쓰이는 수소저장합금(MH)의 한 종류인 $AB_2$계 합금은 수소저장량이 큰 장점이 있으나 초기활성화나 싸이클 수명 및 자기방전 특성이 나쁜 단점이 있다. 본 연구에서는 Zr-Ti-V-Mn-Ni계 합금에 비화학양론적으로 Cr을 소량 첨가했을 때와 La을 첨가하여 불화처리 했을 때의 초기활성화, 싸이클 수명 및 자기방전에 미치는 영향을 조사하였다 EPMA 및 SEM을 이용하여 합금의 표면을 분석하였으며 XRD 분석으로 결정구조를 관찰하였다. 또한 합금으로 전극을 제조하여 정전류 시험법, 임피던스법과 전위주사법 등에 의해 전극특성을 조사하였다. Cr이 첨가될수록 전극표면에 안정한 산화막이 형성되어 V등의 전해질로의 용해를 막아주어 충, 방전에 따른 수명특성 및 자기방전 특성을 향상시키지만 초기 전하이동 반응이 저해되어 초기활성화 특성이 악화되었다. La을 첨가 후 불화처리하면 표면에 반응성이 좋은 입자를 형성하여 전극의 초기 활성화가 크게 향상되었다.
Statement of problem. The aims of the study were to evaluate the effect of current surface conditioning methods on the bond strength of a resin composite luting cement bonded to ceramic surfaces and to identify the optimum cement type. Material and methods. The sixty zirconia ceramic specimens(10 per group) with EVEREST milling machine and 60 tooth block were made. The zirconia ceramic surface was divided into two groups according to surface treatment: (1) airborne abrasion with $110{\mu}m$ aluminum oxide particles; (2) Rocatec system, tribochemical silica coating. The zirconia ceramic specimens were cemented to tooth block using resin cements. The tested resin cements were Rely X ARC, Panavia F and Superbond C&B. Each specimen was mount in a jig of the universal testing machine for shear strength. The results were subjected to 2-way ANOVA and Post hoc tests was performed using Tukey, Scheffe, and Bonferroni test. Results. The mean value of shear bond strength(MPa) were as follows: $$RelyXARC(+Al_2O_3),5.35{\pm}1.69$$; $$RelyXARC(+Rocatec),8.50{\pm}2.13$$; $$PanaviaF(+Al_2O_3),9.58{\pm}1.13$$; $$PanaviaF(+Rocatec),12.98{\pm}1.71$$; $$SuperbondC&B(+Al_2O_3)8.27{\pm}2.04$$; $$SuperbondC&B(+Rocatec),14.46{\pm}2.39$$. There was a significant increase in the shear bond strength when the ceramic surface was subjected to the tribochemical treatment(Rocatec 3M) in all cement groups(P<0.05). Bonding strengths of cements applied to samples treated with $Al_2O_3$ were compared; Rely X ARC showed the lowest values, whereas Panavia F cement showed higher value than that of Superbond C&B group with no statistical significance. When the bond strength of cements with of Rocatec treatment was compared, Rely X ARC showed lowest values. Overall, it was apparent that tribochemical treated Super-Bond possessed higher mean bond strength (14.46MPa; P<0.05) than that of Panavia F cement group with no significance. Conclusions. Silica coating followed silanization(Rocatec treatment) increase the bond strength between resin cement and zirconia ceramic. Panavia F containing phosphate monomer and Superbond C&B comprised of 4-META tend to bond chemically with zirconia ceramic, thus demonstrating higher bond strength compared to BisGMA resin cement. Superbond C&B has shown to have highest value of bonding strength to zirconia ceramic after Rocatec treatment compared to other cement.
Jin-Hwa , Lee;Ju-Yeol, Han;Sang-Gil, Lee;Hyeong-Bae, Pyo;Dong-Kyu, Lee
대한화장품학회지
/
제30권2호
/
pp.173-180
/
2004
20-30nm 크기를 갖는 나노 사이즈 ZnO 입자는 염료, 러버 첨가제, 가스 센서, 바리스터, 감광제와 광촉매로서 여러 산업분야에서 사용되고 있다. 반면에 화장품 산업에서는 나노 미터 크기의 ZnO 입자는 UV 차단물질과 자연스러운 메이크업 효과를 증진시키는 소재로서 사용되고 있다. 그러나 순수 ZnO 입자는 화장품에 적용했을 때 사용감 악화로 인해 그 사용량이 제한되고 있는 실정이다. 따라서 본 논문에서는 사용감은 판상 분체의 특성을 갖으면서 ZnO 본연의 특성을 유지하는 분체를 합성하기 위해 화장품 산업에서 널리 사용되고 있는 세리사이트, 보론나이트라이드, 비스무스옥시클로라이드와 같은 판상분체에 나노 사이느 ZnO가 코팅된 고기능성 무기복합분체를 하였다. 본 논문에서는 열수침전법에 의해 무기복합분체를 합성하였다. Zn원으로서 ZnCl$_2$가 사용되었고 침전제로는 hexamethylenetetramine(HMT)과 urea를 사용하였다. 실험변수로서 출발물질의 농도, 침전제의 종류, 핵생성제의 농도, 반응온도와 반응시간을 변화시켜 실험하였다. 합성된 무기복합분체의 형태, 결정상 변화, 열특성, UV-차단효과를 관찰하기 위해 각각 FE-SEM, XRD, FT-IR, TGA-DTA, In vitro SPF 테스터 기기를 이용하여 확인하였다. 합성된 무기복합분체를 메이크업 제품에 적용시켜 사용감 테스트하였다. 본 실험 결과 판상분체의 종류에 상관없이 일정한 합성조건 범위에서 나노크기 ZnO 입자가 균일하게 코팅되었다. 코팅된 판상분체를 프레스트 파우더제품에 적용시켜 사용자 테스트한 결과 판상분체 특유의 광택은 현저히 감소되는 반면 자연스러운 화장 연출, 사용감 개선 및 부착력 향상 효과를 얻을 수 있었다.
DC 스퍼터를 이용하여 은(Ag) 나노입자를 입도 0.2~3 ${\mu}m$ 크기를 갖는 페롭스카이트(Perovskite) $La_{0.7}Sr_{0.3}Co_{0.3}Fe_{0.7}O_{3-{\delta}}$(LSCF) 입자 표면에 코팅하여 복합재를 제조하였다. 제조된 LSCF/Ag 복합재에서 Ag 나노입자는 수 나노입자 크기로 형성되었으며 Ar가스 분위기에서 $800^{\circ}C$ 열처리 후에도 Ag입자가 응집되는 현상이 없어 안정적으로 증착되었음을 확인하였다. LSCF 표면에 Ag나노입자 코팅양이 2.11 wt.%까지 증가함에 따라 Fourier Transform Infrared Spectroscopy(FT-IR) 분광기의 파수가 크게 변하여 강한 결합이 형성되어 있으며, Ag 코팅 전후 결정 구조의 변화는 없으나 M$\ddot{o}$ssbauer 분광 분석으로 확인한 결과 $Fe^{4+}$ 이온이 감소하면서 $Fe^{3+}$ 이온이 증가하여 LSCF의 전자 가에 변화가 생김을 확인 할 수 있었다.
Carbon nanotubes (CNTs) are attractive material because of their superior electrical, mechanical, and chemical properties. Furthermore, their geometric features such as a large aspect ratio and a small radius of curvature at tip make them ideal for low-voltage field emission devices including backlight units of liquid crystal display, lighting lamps, X-ray source, microwave amplifiers, electron microscopes, etc. In field emission devices for display applications, the phosphor anode is positioned against the CNT emitters. In most case, light generated from the phosphor by electron bombardment passes through the anode front plate to reach observers. However, light is produced in a narrow depth of the surface of the phosphor layer because phosphor particles are big as much as several micrometers, which means that it is necessary to transmit through the phosphor layer. Hence, a drop of light intensity is unavoidable during this process. In this study, we fabricated a transparent cathode back plate by depositing an ultra-thin film of single walled CNTs (SWCNTs) on an indium tin oxide (ITO)-coated glass substrate. Two types of phosphor anode plates were employed to our transparent cathode back plate: One is an ITO glass substrate with a phosphor layer and the other is a Cr-coated glass substrate with phosphor layer. For the former case, light was radiated from both the front and the back sides, where luminance on the back was ~30% higher than that on the front in our experiments. For the other case, however, light was emitted only from the cathode back side as the Cr layer on the anode glass rolled as a reflecting mirror, improving the light luminance as much as ~60% compared with that on the front of one. This study seems to be discussed about the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the cathode back side. The experimental procedures are as follows. First, a CNT aqueous solution was prepared by ultrasonically dispersing purified SWCNTs in deionized water with sodium dodecyl sulfate (SDS). A milliliter or even several tens of micro-liters of CNT solution was deposited onto a porous alumina membrane through vacuum filtration. Thereafter, the alumina membrane was solvated with the 3 M NaOH solution and the floating CNT film was easily transferred to an ITO glass substrate. It is required for CNT film to make standing CNTs up to serve as electron emitter through an adhesive roller activation.
매체 순환식 연소는 연소 공정 자체에서 질소 산화물 생성이나 부가적인 에너지 소비 없이 이산화탄소 분리가 이루어지는 신공정이다. 이 공정은 금속 산화물 입자가 두 개의 반응기를 순환하며 산화와 환원을 거치는 과정으로 구성되어 있다. 이 연구에서는 bentonite에 담지된 산화철 산소 공여 입자의 반응 속도 식을 shrinking core 모델을 통하여 수립하였다. 반응성 결과를 바탕으로 반응기 설계 기준인 고체 순환량과 입자 충전량을 도출하였다. 매체 순환식 연소 공정의 적용을 위하여 두 가지 형태의 연결된 유동층 즉, 상승관과 기포 유동층이 각각 한 개씩인 형태, 상승관 한 개와 기포 유동층이 두 개로 구성된 형태로 시스템을 설계하였다. 고체 순환량은 loop-seal을 통하여 $30kg/m^2s$ 정도까지 변화시켰다. 고체 순환량은 loop-seal의 기체 주입량이 증가할수록 증가하였으며 보조 기체를 주입하면 그 양이 더 증대되었다. 고체 순환량이 증가함에 따라 상승관 내부의 고체량은 증가하였다. 상승관으로부터 다른 반응기로의 기체 누출량은 1% 미만의 수준이었다.
탄산칼슘과 고분자 재료가 배합되면 서로의 계면에 대한 친화성이 결여되어 분산성이 저하하기 때문에 이를 위해 탄산칼슘을 표면처리를 하지만 이는 분체자신의 표면에너지를 저하시키는 역효과의 가능성도 있다. 따라서 표면처리를 하지 않아도 미세한 1차 입자의 상태로 유지하는 초미립체(입경 0.02~0.09$mu extrm{m}$) 입자의 콜로이드형 탄산칼슘 합성에 대한 기술이 절실히 요구되나 합성시 목적입도가 평균입도 범주에 속하고 또 그 분포가 좁아야 함이 핵심요소기술이 되는데 입경제어에 대한 인자 규명 및 최적 조건의 항구적인 합성조건에 대한 연구가 전혀 수행되지 못한 형편이다. 이에 본 연구에서는 수산화칼슘 현탁액에 탄산가스를 접촉시키는 기-액접촉방식의 CMSMPR(Continuous Mixed Suspension Mixed Product Removal)법을 이용하여 콜로이드형 탄산칼슘 합성을 목적으로 입방형 탄산칼슘과 함께 제어함으로 두 종류의 침강성 탄산캄슘을 최적 합성화 할 수 있었다. 수산화칼슘 현탁액 제조는$ 1100^{\circ}C$에서 수산화칼슘을 2시간 소성을 시켜 제조한 산화칼슘을 증류수에 600rpm으로 30분간 수화시킨 반응현탁액 2ι를 반응온도 $15^{\circ}C$와 반응교반속도 600rpm, 탄산가스 주입속도 1ι/min으로 모든 조건을 고정시키고 현탁액에 대한 산화칼슘의 농도변화만으로 입방형(0.2~0.9$\mu\textrm{m}$)과 콜로이드형($0.02~0.09\mu\textrm{m}$)을 합성하였고 이에 대한 반응현탁액의 농도 최적조건이 각각 5wt%와 2.5wt%임을 확인하였다. 결국 입경제어의 주요 인자가 현탁액의 농도임을 알았고 합성한 탄산칼슘은 Zeta sizer를 통해 측정하여 평균입도가 입방형은 223.4nm(0.223$\mu\textrm{m}$)와 콜로이드형 93.6nm(0.093$\mu\textrm{m}$)임을 확인하여 $H_2O$ 반응계에서 안정적인 균일입도제어를 할 수 있었다.
Al-Shehri, Eman Z.;Al-Zain, Afnan O.;Sabrah, Alaa H.;Al-Angari, Sarah S.;Dehailan, Laila Al;Eckert, George J.;Ozcan, Mutlu;Platt, Jeffrey A.;Bottino, Marco C.
Restorative Dentistry and Endodontics
/
제42권3호
/
pp.206-215
/
2017
Objectives: To determine the combined effect of fatigue cyclic loading and thermocycling (CLTC) on the shear bond strength (SBS) of a resin cement to zirconia surfaces that were previously air-abraded with aluminum oxide ($Al_2O_3$) particles at different pressures. Materials and Methods: Seventy-two cuboid zirconia specimens were prepared and randomly assigned to 3 groups according to the air-abrasion pressures (1, 2, and 2.8 bar), and each group was further divided into 2 groups depending on aging parameters (n = 12). Panavia F 2.0 was placed on pre-conditioned zirconia surfaces, and SBS testing was performed either after 24 hours or 10,000 fatigue cycles (cyclic loading) and 5,000 thermocycles. Non-contact profilometry was used to measure surface roughness. Failure modes were evaluated under optical and scanning electron microscopy. The data were analyzed using 2-way analysis of variance and ${\chi}^2$ tests (${\alpha}=0.05$). Results: The 2.8 bar group showed significantly higher surface roughness compared to the 1 bar group (p < 0.05). The interaction between pressure and time/cycling was not significant on SBS, and pressure did not have a significant effect either. SBS was significantly higher (p = 0.006) for 24 hours storage compared to CLTC. The 2 bar-CLTC group presented significantly higher percentage of pre-test failure during fatigue compared to the other groups. Mixed-failure mode was more frequent than adhesive failure. Conclusions: CLTC significantly decreased the SBS values regardless of the air-abrasion pressure used.
촉진수송은 기존의 고분자 막에서는 힘든, 투과도와 선택도를 동시에 향상시킬 수 있는 기술 중 한 가지이다. 촉진수송 분리막을 이용한 올레핀/파라핀 분리는 기존의 증류공정을 대체할 수 있는 기술로써 많은 관심을 받아왔다. 본 연구에서는 테트라플루오로붕산은/질산알루미늄의 혼합염이 포함된 고분자 블렌드 기반의 촉진수송 올레핀 분리막을 제조하였다. 자유 라디칼중합법을 이용하여 폴리다이메틸실록세인-g-폴리옥시에틸렌 메타크릴레이트 가지형 공중합체를 합성하였다. 또한, 폴리다이메틸실록세인-g-폴리옥시에틸렌 메타크릴레이트 매질에 폴리에틸렌옥사이드를 다양한 비율로 혼합하였다. 폴리에틸렌옥사이드를 폴리다이메틸실록세인-g-폴리옥시에틸렌 메타크릴레이트 가지형 공중합체 질량 대비 70%를 혼합하였을 때, 혼합기체 선택도 및 투과도는 5.6 및 10.05 GPU에 도달하였다. 이와 같은 복합막의 올레핀 분리 성능이 향상된 이유는, 분리막에 첨가된 은이온이 올레핀 기체분자의 선택적인 촉진 수송을 하였고, 또한 고투과성의 고분자 블렌드가 사용되었기 때문이다. 또한 은이온의 은나노입자로의 환원을 억제시키는 질산알루미늄의 첨가로 인해 복합막의 장시간 안정도를 향상시킬 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.