• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1105-1106
• /
• 2008

Staggered type self-aligned transparent-oxide-semiconductor transistors with indium-zinc-oxide as a semiconductor have studied. In this device fabrication, successive sputtering of oxide semiconductor and insulator without breaking of vacuum and without exposing in air, humidity and oxygen can be realized because oxide semiconductor is transparent. As a result of fabrication, transistor characteristics with mobility of $30cm^2/Vs$ and on-off ratio of $10^5$ could be obtained for the newly developed self-alignment device structure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.211-213
• /
• 2008

The TFTs from ZnO semiconductor with hafnium oxide dielectrics were prepared by atomic layer deposition to characterize the electrical properties. Good electrical properties of oxide TFT was obtained with channel mobility of $2.1\;cm^2/Vs$, threshold voltage of 0 V, the subthreshold slope of 0.9 V/dec, and on to off current ratio of $10^6$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.27-32
• /
• 2006

The present status and prospects for further development of thin-film electroluminescent (TFEL) devices using oxide phosphors are described. High-luminance oxide TFEL devices have been recently developed using a new combinatorial deposition technique featuring rf magnetron sputtering with a subdivided powder target. In addition, new flexible oxide TFEL devices have been fabricated on an oxide ceramic sheet and operated stably in air above $200^{\circ}C$.

• Microbiology and Biotechnology Letters
• /
• v.24 no.2
• /
• pp.155-159
• /
• 1996

The strain which produces 2-phenylethanol (PEA) from styrene oxide was isolated from soil samples near Ulsan PO/SM plant. The isolated strain was identified as Pseudomonas putida through its morphological, physiological characteristics, and DNA G+C contents. Its metabolic pathway from styrene oxide to 2-phenylethanol was studied and it was found that styrene oxide was transformed to phenylacetaldehyde, to 2phenylethanol (PEA), and then to phenylacetic acid by this strain.

• Journal of the Korean Ceramic Society
• /
• v.34 no.7
• /
• pp.699-702
• /
• 1997

The cross sectional image of thin oxide failure of MOS device could be observed by Emission Microscope and Focused Ion Beam at the weak point. The oxide failures in low electric field was associated with the presence of a particle or abnormal pattern. The failures occuring at medium field are related to a pit of Si substrate. The pits could be originated from the microdefects of Cz Si wafer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1047-1050
• /
• 2009

The two approaches to improve the stability of oxide TFTs are described. First approach is the optimization of device architecture including MIS structure and passivation layer using conventional InGaZnO semiconductor channel layer. Second approach is to develop the new kinds of oxide semiconductor materials, which is very robust and stable against the gate bias stress and thermal stress.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.35-37
• /
• 2009

In this work, we introduce new next generation activematrix backplane technologies for large-size AMOLED displays. Among the general requirements for successful market launch of AMOLED TVs, backplane issues are discussed. It will be shown that the amorphous oxide TFT is most suitable due to large scalability and superior cost effectiveness. Development status and current challenges of amorphous oxide TFTs are discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.102-105
• /
• 1997

The thickness dependence of stress voltage oxide currents has been measured in oxides with thicknesses between 10nm and 80nm. The oxide currents were shown to be composed of stress current and transient current. The stress current was caused by trap assited tunneling through the oxide. The transient current was caused by the tunneling charging and discharging of the trap in the interfaces. The stress current was used to estimate to the limitations on oxide thicknesses. The transient current was used to the data retention in memory devices.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2028-2030
• /
• 2005

The electrical conductivity of manganese oxide and complex manganese oxide produced by anodic deposition method was measured. The additive transition metal is Cu, Co and Fe. The transition metals like as Cu, Co and Fe improved electrical conductivity of complex manganese oxide compared with manganese oxide. This is coincide with the results of molecular orbital calculation by DV-Xa.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.894-897
• /
• 2006

Spatial distribution of injected electrons and holes is evaluated by using single-junction charge pumping technique in SONOS(Poly-silicon/Oxide/Nitride/Oxide/Silicon) memory cells. Injected electron are limited to length of ONO(Oxide/Nitride/oxide) region in locally ONO stacked cell, while are spread widely along with channel in fully ONO stacked cell. Hot-holes are trapped into the oxide as well as the ONO stack in locally ONO stacked cell.