• Macromolecular Research
• /
• 제14권4호
• /
• pp.466-472
• /
• 2006

The kinetic behavior of emulsion polymerizations of styrene in the presence of sulfonated N-hydroxy ethyl aniline (SHEA) was investigated with two initiators: 2,2'-azobisisobutyronitrile (AIBN) and potassium persulfate (KPS). SHEA was synthesized using a stepwise polyurethane reaction method from 3-hydroxy-1-propane sulfonic acid sodium salt, isophorone diisocyanate (IPDI), and N-(2-hydroxyethyl) aniline. Stable core-shell poly(styrene/sulfonated N-hydroxy ethyl aniline, St/SHEA) latex particles were successfully prepared by using an appropriate amount of AIBN, in which SHEA plays the role of 'surfmer', i.e., acting as both a surfactant in the emulsion polymerization and a monomer in the chemical oxidative polymerization. The kinetic behavior was dissimilar to that of typical emulsion polymerization systems. A long inhibition period and low rate of polymerization were observed due to radical loss by the oxidative polymerization of SHEA. It was concluded, due to the low water-solubility of AIBN and retardation reaction by SHEA, that the initial loci of polymerization were monomer droplets. However, growing polymer particles as polymerization loci became predominant as polymerization proceeded. It was suggested that AIBN was more effective than KPS in the preparation of the core-shell type poly(St/SHEA) latex particles. With KPS, no substantial polymerization was observed in any of the samples.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2345-2351
• /
• 2012

Conductive honeycomb-patterned polystyrene (PS) thin films were prepared by the formation of a polyaniline (PANI) thin layer on the surface of the patterned PS thin films using simple one-step chemical oxidative polymerization of aniline. The in situ chemical oxidation polymerization of aniline hydrochloride solution on the patterned structure of the PS films was conducted in the presence of multiwalled carbon nanotubes (MWCNT) to prepare the PANI-MWCNT/PS composite film. The concentration (wt %) of MWCNT was varied in the range of 1%-3% by weight. The dependence of surface morphology of the PANI/PS and PANI-MWCNT/PS composite film to the polymerization time was observed by scanning electron microscopy. The room temperature DC conductivity was obtained by the four-probe technique. The conductivity of the PANI-MWCNT/PS composite film was affected both by the MWCNT concentration and polymerization time. In addition, DC electrical field was loaded during the oxidative polymerization to affect the distribution of the MWCNT included in the composite film, varying the loading voltage in the range of 0.1-3.0 V. The conductivity of the PANI-MWCNT/PS composite film was increased as loading voltage rose. However, this increase stops at a voltage higher than the critical value.

• 공업화학
• /
• 제27권1호
• /
• pp.45-49
• /
• 2016

과량의 GO 및 poly(4-styrene sulfonate) (PSS)의 존재 하에서 산화제 없이 3,4-ethylenedioxythiophene (EDOT)의 in-situ 중합 반응을 시도하였다. 반응물(GO-P)의 XPS, FT-IR 등의 분석을 통하여 산화제 없이도 모노머인 EDOT의 산화중합이 원활하게 진행되어 PEDOT/PSS가 합성되고 GO와 복합화된 것을 확인할 수 있었다. GO-P는 수분산성은 우수하였으나, 전기적 절연체인 GO가 42% 포함되어 있으므로 전기전도도는 $15S{\cdot}m^{-1}$로 매우 낮았다. 그러나 GO-P 필름을 $200^{\circ}C$에서 8 h 열처리하면 GO의 일부분이 환원되면서 전도도가 $212S{\cdot}m^{-1}$까지 향상되었다.

• 분석과학
• /
• 제21권1호
• /
• pp.25-33
• /
• 2008

Organic disulfide compounds are having higher theoretical capacity than the conventional cathode material and are considered as the important storage material. Here, we are reporting the preparation of poly (2,2'-dithiodianiline) PDDA/multiwall carbon nanotubes, (MWCNTs) composites under different experimental conditions. Amine functionalized and unfunctionalized MWCNTs were independently used for the preparation of composites. Composites were prepared in the presence of cetyl trimethyl bromide (CTAB), a cationic surfactant, and also in the absence of CTAB. A physical mixture of PDTDA and MWCNTs was formed with unfunctionalized MWCNTs. Grafting of PDDA onto MWCNTs was performed by chemical oxidative polymerization of 2, 2'-dithiodianiline in the presence of amine functionalized MWCNTs. The composites of MWCNTs and PDTDA were characterized for structure, morphology and thermal properties through Fourier transform infrared spectroscopy, Fourier transform Raman spectroscopy, scanning electron microscopy and UV-visible spectroscopy. The composite materials prepared by this method are expected to find applications as electrode materials for lithium batteries.

• 대한가정학회지
• /
• 제30권1호
• /
• pp.1-9
• /
• 1992

Graft polymerization mechanism and rate of polymerization of MMA and MMA/4-VP onto cellulose fiber using Ce(IV) salt as an initiatior were investigated. It was shown that the concentration of Ce(IV) salt affected on the graft yield, graft efficiency, total conversion and the rate of graft polymerization. The graft yield and total cenversion for MMA grafted polymer were significantly higher than those for MMA/4-VP grafted polymer with variation of CAN concentration. In this system the oxidative termination by Ce(IV) salt was considered particularly in higher concentration Ce(IV) ion. The change in the mode of termination reactions with variation of CAN concentration made possible the presence of an optimum Ce(IV) ion concentration for maximum graft yield.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.226-226
• /
• 2006

Ethylene was polymerized with a catalyst having sterically hindered pentamethylcyclopentadienyl ligand, $Cp^{\ast}_{2}ZrCl_{2}/MAO$, and the polymerization mixture were treated with dry oxygen (oxidative workup) to produce hydroxyl-terminated polyethylenes (PE-OH). Polyethylene-block-Poly (${\Box}-caprolactone$) was synthesized from PE-OH and ${\cdot}\^{A}-caprolactone$A by using stannous octoate as a catalyst for ring opening polymerization of ${\cdot}\^{A}-caprolactone$. Polyethylene-block-Poly(methyl methacrylate) was obtained by transforming the hydroxyl-terminated polyethylenes to macroinitiators for atom transfer radical polymerization (ATRP) and by reacting them with MMA.

• 공업화학
• /
• 제10권6호
• /
• pp.902-906
• /
• 1999

메틸셀루로스를 호스트고분자로 하고 copper(II) percolate를 산화제로 사용하여 기상상태에서 직접중합방법으로 전도성 복합필름을 합성하였다. 필름으로서 우수한 성형성과 기계강도를 갖고 있는 메틸셀루로즈는 PVA와 키토산과는 달리 피롤에 대하여 높은 친화성을 나타내어서 기상중합시 호스트고분자로 적합하였다. 기상중합법으로 합성된 폴리피롤은 복합재료 내에서 전도성네트워크를 형성하여 전도성 복합필름의 전기전도도는 $10^{-1}-10^{-7}S/cm$를 나타내었다. 피롤이 호스트고분자 내에서의 폴리피롤로 중합이 되는 정도를 UV-vis분광계로 확인하였다. 전도성 복합필름의 전기전도도와 기계강도는 산화제의 농도와 합성시간에 크게 의존하였다. TGA분석결과는 호스트고분자 내에 형성된 폴리피롤은 복합재료의 열적 안정성에 영향을 미치지 않는다. 전자현미경 분석결과 폴리피롤이 복합재료 내에 균일하게 침투하여 분산되어 있음을 나타내었다. DMA를 사용하여 폴리피롤과 호스트고분자와의 상용성을 조사하였으며 dynamic mechanical analysis(DMA) 분석결과 복합재료 내에서 폴리피롤의 함량이 증가되면서 상용성이 점진적으로 저하되었다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.83-84
• /
• 2006

In aqueous phase, we directly prepared conducting and photoluminescent nano-structured particles by oxidation polymerization. Thiophene(PT) was initiated by $FeCl_{3}/H_{2}O_{2}$ (catalyst/oxidant) combination system. And, polydispersed core-shell poly(styrene/thiophene) and polyaniline(PANI)-coated multi core-shell polystyrene latex particles were successfully prepared by oxidative and radical polymerization. The resulting latex particles have fine improved luminescence and conductive efficiency and dispersion state due to the PT and PANI shell. Hyper functionalized nanoparticle would be expected to increase the processibility in various electrical and electro-optical fields.

• 대한전기학회논문지
• /
• 제43권3호
• /
• pp.528-531
• /
• 1994

Digitalization in electronic system is required the capacitor which have a large capacitance with small size, low impedance at high frequency, and high reliability. The fabrication and its properties of aluminum solid electrolytic capacitor are investigated. Employing conduction polymer film such as, polypyrrole as solid electroylte, solid type aluminum electrolytic capacitors were made. The surface of insulationg oxide is covered with conducting polymer layer prepared by chemical oxidative polymerization. Thereafter this conducting layer is covered with conducting polymer prepared by electrochemical polymerization. The dielectric properties of these capacitors were also measured and discussed. Regarding on frequency characteristics of the trial made capacitor, impedance and ESR at high frequency is lower than those of the stacked type film capacitor. It is alo confirmed that temperature coefficient of capacitance and dissipation factor of the capacitor are lower than those of film capacitor and liquid type aluminum electrolytic capacitor.

• 멤브레인
• /
• 제17권4호
• /
• pp.294-301
• /
• 2007

비불소계 스티렌 고분자 전해질 막의 산화안정성을 개선하기 위해 p-methyl styrene, t-butyl styrene, ${\alpha}-methyl$ styrene과 같은 스티렌 유도체를 단독 또는 복합으로 도입하고 모노머 흡수법을 이용하여 막을 제조하였다. 제조된 막의 특성분석으로 중합무게비, 함수율, 이온교환용량, 수소이온 전도도 및 가속조건에서의 산화안정성을 조사하였다. 사용된 스티렌 유도체의 구조 및 특성에 따라 모노머 흡수, 중합 및 술폰화 단계가 영향을 받는 것으로 나타났다. 산화적으로 안정한 고분자를 형성하는 ${\alpha}-methyl$ styrene은 중합 단계가 어렵기 때문에 스티렌 또는p-methyl styrene과 공중합하여 제조하였고 p-methyl styrene과 공중합된 ${\alpha}-methyl$ styrene 막은 스티렌과 공중합한 막보다 높은 전도도 및 안정성을 나타내었으나 낮은 분자량으로 인해 안정성의 개선을 크게 보이지 못하였다. 벤젠 고리에 큰 치환기를 갖는 t-butyl styrene은 모노머 흡수 및 술폰화과정이 용이하지 않기 때문에 제조된 막의 성능이 감소하였으며 이를 p-methyl styrene과 공중합할 때 우수한 성능과 스티렌막보다 크게 개선된 안정성을 보였다.