Browse > Article

Core-Shell Poly(Styrene/Sulfonated N-hydroxy Ethyl Aniline) Latex Particles Prepared by Chemical Oxidative Polymerization in Emulsion Polymerization  

Shin Jin-Sup (Department of Chemical Engineering, Yonsei University)
Lee Jung-Min (Department of Chemical Engineering, Yonsei University)
Suzuki Kiyoshi (Department of Materials Science and Engineering, Faculty of Engineering, Fukui University)
Nomura Mamoru (Department of Materials Science and Engineering, Faculty of Engineering, Fukui University)
Cheong In-Woo (Department of Applied Chemistry, School of Engineering, Kyungpook National University)
Kim Jung-Hyun (Department of Chemical Engineering, Yonsei University)
Publication Information
Macromolecular Research / v.14, no.4, 2006 , pp. 466-472 More about this Journal
Abstract
The kinetic behavior of emulsion polymerizations of styrene in the presence of sulfonated N-hydroxy ethyl aniline (SHEA) was investigated with two initiators: 2,2'-azobisisobutyronitrile (AIBN) and potassium persulfate (KPS). SHEA was synthesized using a stepwise polyurethane reaction method from 3-hydroxy-1-propane sulfonic acid sodium salt, isophorone diisocyanate (IPDI), and N-(2-hydroxyethyl) aniline. Stable core-shell poly(styrene/sulfonated N-hydroxy ethyl aniline, St/SHEA) latex particles were successfully prepared by using an appropriate amount of AIBN, in which SHEA plays the role of 'surfmer', i.e., acting as both a surfactant in the emulsion polymerization and a monomer in the chemical oxidative polymerization. The kinetic behavior was dissimilar to that of typical emulsion polymerization systems. A long inhibition period and low rate of polymerization were observed due to radical loss by the oxidative polymerization of SHEA. It was concluded, due to the low water-solubility of AIBN and retardation reaction by SHEA, that the initial loci of polymerization were monomer droplets. However, growing polymer particles as polymerization loci became predominant as polymerization proceeded. It was suggested that AIBN was more effective than KPS in the preparation of the core-shell type poly(St/SHEA) latex particles. With KPS, no substantial polymerization was observed in any of the samples.
Keywords
core-shell; conductive polymers; emulsion polymerization; oxidative polymerization; surfmer;
Citations & Related Records

Times Cited By Web Of Science : 6  (Related Records In Web of Science)
Times Cited By SCOPUS : 5
연도 인용수 순위
1 A. Lian, S. Besner, and L. H. Dao, Synth. Met., 74, 21 (1995)   DOI   ScienceOn
2 S. Ye, N. T. Do, L. H. Dao, and A. K. Vijh, Synth. Met., 88, 65 (1997)   DOI   ScienceOn
3 L. H. Dao, J. Y. Bergeron, J. W. Chevalier, M. T. Nguyen, and R. Paynter, Synth. Met., 41, 655 (1991)   DOI   ScienceOn
4 S. Ye, S. Besner, L. H. Dao, and A. K. Vijh, J. Electroanal. Chem., 381, 71 (1995)   DOI
5 K. Shah and J. Iroh, Synth. Met., 132, 35 (2002)   DOI   ScienceOn
6 R. Sivakumar and R. Saraswathi, Synth. Met., 138, 381 (2003)   DOI   ScienceOn
7 S. P. Armes and M. Aldissi, J. Chem. Soc., Chem. Commun., 88 (1989)
8 C. Barthet, S. P. Armes, S. F. Lascelles, S. Y. Luk, and H. M. E. Stanley, Langmuir, 14, 2032 (1998)   DOI   ScienceOn
9 C. Barthet, S. P. Armes, M. M. Chehimi, C. Bilem, and M. Omastova, Langmuir, 14, 5032 (1998)   DOI   ScienceOn
10 L. Y. Wang, Y. J. Lin, and W. Y. Chiu, Synth. Met., 119, 155 (2001)   DOI   ScienceOn
11 D. C. Trivedi, in Handbook of Organic Conductive Molecules and Polymers, H. S. Nalwa, Ed., John Wiley & Sons, Chichester, 1997, Vol. 2, pp 505-572
12 J. Brandrup, E. H. Immergut, E. A. Grulke, in Polymer Handbook, A Wiley-Interscience Publication, 1999, Chapter II, p.82, 88
13 D. C. Trivedi and S. K. Dhawan, Synth. Met., 58, 309 (1993)   DOI   ScienceOn
14 G. D'Aprano, M. Leclerc, and G. Zotti, J. Electroanal. Chem., 351, 145 (1993)   DOI
15 A. Andreatta, Y. Cao, J. C. Chiang, A. J. Heeger, and P. Smith, Synth. Met., 26, 383 (1988)   DOI   ScienceOn
16 S. F. Lascelles and S. P. Armes, Adv. Mater., 7, 864 (1995)   DOI   ScienceOn
17 S. F. Lascelles and S. P. Armes, J. Mater. Chem., 7, 1339 (1997)   DOI   ScienceOn
18 M. Angelopoulos, G. E. Asturias, S. P. Ermer, A. Ray, E. M. Scherr, A. G. Macdiarmid, M. Akhtar, Z. Kiss, and A. J. Epstein, Mol. Cryst. Liq. Cryst., 160, 151 (1988)   DOI
19 R. G. Gilbert, in Emulsion Polymerization: A Mechanistic Approach, Academic Press, 1995, Chapter 6, pp 60
20 A. Yassar, J. Roncali, and F. Garnier, Polym. Commun., 28, 103 (1987)   DOI   ScienceOn
21 M. Okubo, S. Fujii, and H. Minami, Colloid Polym. Sci., 279, 139 (2001)   DOI
22 Y. Cao, P. Smith, and A. J. Heeger, Synth. Met., 48, 91 (1992)   DOI   ScienceOn
23 S. F. Lascelles, S. P. Armes, P. A. Zhdan, S. J. Greaves, A. M. Brown, J. F. Watts, S. R. Leadley, and S. Y. Luk, J. Mater. Chem., 7, 1349 (1997)   DOI   ScienceOn
24 J. Y. Bergeron and L. H. Dao, Macromolecules, 25, 3332 (1992)   DOI
25 P. Beadle, S. P. Armes, S. Gottesfeld, C. Mombourquette, R. Houlton, W. D. Andrews, and S. F. Agnew, Macromolecules, 25, 2526 (1992)   DOI
26 R. Y. Hu, A. T. Wang, and J. P. Hartnett, Exp. Therm. Fluid Sci., 4, 723 (1991)   DOI   ScienceOn
27 S. P. Armes and B. Vincent, J. Chem. Soc., Chem. Commun., 288 (1987)
28 S. P. Armes, J. F. Miller, and B. Vincent, J. Colloid Interf. Sci., 118, 410 (1987)   DOI   ScienceOn
29 C. Prasanna, in Conducting Polymers, Fundamentals and Applications A Practical Approach, Kluwer Academic Publishers, Massachusetts, 1999
30 L. G. B. Bremer, M. W. C. G. Verbong, M. A. M. Webers, and M. A. M. M. van Doorn, Synth. Met., 84, 355 (1997)   DOI   ScienceOn
31 S. P. Armes, in Intrinsically Conducting Polymers: An Emerging Technology, M. Aldissi, Ed., Kluwer Academic Publishers, 1993, pp 35
32 J. S. Shin, J. H Kim, and I. W. Cheong, Synth. Met., 151, 246 (2005)   DOI   ScienceOn
33 S. P. Armes, M. Aldissi, S. Agnew, and S. Gottesfeld, Mol. Cryst. Liq. Cryst., 190, 63 (1990)   DOI
34 S. P. Armes, M. Aldissi, S. Agnew, and S. Gottesfeld, Langmuir, 6, 1745 (1990)   DOI
35 A. E. Wiersma, L. M. A. vd Steeg, and T. J. M. Jongeling, Synth. Met., 71, 2269 (1995)   DOI   ScienceOn
36 H. de Chanterac, P. Roduit, N. Belhadj-Tahar, A. Fourrier- Lamer, Y. Djigo, S. Aeiyach, and P. C. Lacaze, Synth. Met., 52, 183 (1992)   DOI   ScienceOn
37 K. G. Neoh, E. T. Kang, and K. L. Tan, J. Macromol. Sci., Pure Appl. Chem., 401, A29 (1992)
38 A. Lian, S. Besner, N. E. Cherid, J. Y. Bergeron, and L. H. Dao, Polym. Mat. Sci. Eng., 70, 445 (1993)
39 S. Maeda, D. B. Cairns, and S. P. Armes, Eur. Polym. J., 33, 245 (1997)   DOI   ScienceOn
40 I. W. Cheong, M. Nomura, and J. H. Kim, Macromol. Chem. Phys., 201, 2221 (2000)   DOI   ScienceOn
41 H. Q. Xie, H. Liu, Z. H. Liu, and J. S. Guo, Angew. Makromol. Chem., 243, 117 (1996)   DOI   ScienceOn
42 L. H. Dao, M. Leclerc, J. Guay, and J. W. Chevalier, Synth. Met., 29, E377 (1989)   DOI   ScienceOn