• 제목/요약/키워드: oxidation characterization

검색결과 406건 처리시간 0.022초

$LiMn_{2-y}M_yO_4$ 정극 활물질의 전기화학적 특성 - II. $LiMn_{2-y}M_yO_4$ (M=Zn, Mg)의 충방전 및 순환전위전류 특성 (The Electrochemical Characterization of$LiMn_{2-y}M_yO_4$ Cathode Material - II. Charge and Discharge Property and Cyclic Voltametry of $LiMn_{2-y}M_yO_4$ (M=Zn, Mg))

  • 정인성;김종욱;구할본;김형곤;손명모;박복기
    • 한국전기전자재료학회논문지
    • /
    • 제14권4호
    • /
    • pp.316-322
    • /
    • 2001
  • Cathode materials $LiMn_{2-y}$$M_{y}$ $O_4$(M=Zn and Mg) were obtained by reacting the mixture of LiOH.$H_2O$, Mn $O_2$ and MgO ar ZnO at 80$0^{\circ}C$ for 36h in an air atmosphere. These materials showed an extended cycle life in lithium-anode cells working at room temperatue in a 3.0 to 4.3V potential window. Among these materials, LiM $n_{1.9}$M $g_{0.1}$ $O_4$ showed the best cycle performance in terms of the capacity and cycle life. The discharge capacities of the cathode for the Li/LiM $n_{1.9}$ $M_{0.1}$ $O_4$ cell at the 1st cycle and at the 70th cycle were about 120 and 105mAh/g, respectively. This cell capacity is retained by 88% after 70th cycle. In cyclic voltammetry measurement, all cells revealed tow oxidation peaks and reduction peaks. However, Li/$LiMn_{2-y}$$M_{y}$ $O_4$ cell substituted with Zn and Mg showed new reaction peak during reduction reaction.eaction.ion.ion.

  • PDF

Bisphenol A ethoxylate diacrylate를 가교제로 사용한 PEO계 고분자 전해질의 전기화학적 특성 및 물성 (Electrochemical Characterization and Mechanical Properties of PEO-like Solid Polymer Electrolyte Based on Bisphenol A Ethoxylate Diacrylate)

  • 김석구;강영구;이희우;이창진
    • 폴리머
    • /
    • 제25권4호
    • /
    • pp.568-574
    • /
    • 2001
  • Bisphenol A ethoxylate diacrylate를 가교제로 사용하여 PEO계 고분자 고체전해질을 제조하였으며, 이의 전기화학적 특성 및 기계적인 물성을 조사하였다. 제조된 고분자 고체전해질은 이온전도도를 높이기 위해 비휘발성의 PEGDMe [poly(ethylene glycol) dimethyl ether]를 가소제로 도입하였다. 첨가된 PEGDMe 함량이 높을수록 전기전도도는 증가하였다. 최대 이온전도도는 30에서 1.0 ${\times}$ 10$^{-3}$S/cm [Bisphenol A ethoxylate diacrylate ([EO]/[phenol]=15), PEGDMe250 80 wt%, LiCF$_3SO_3$]이었다. 제조된 고분자 전해질의 인장강도는 0.4 ~ 5 MPa이었으며 ${\phi}$=3 mm 봉에 대해 90$^{\circ}$ 및 180$^{\circ}$ 의 굽힘에도 균열을 발생하지 않았다. 리튬 기준전극에 대해 4.5 V 이상의 산화전위에도 전기화학적으로 안정하였다.

  • PDF

Isolation and Characterization of Glycolate Oxidase Gene from Panax ginseng C. A. Meyer

  • Parvin, Shohana;Pulla, Rama Krishna;Kim, Yu-Jin;Sathiyaraj, Gayathri;Jung, Seok-Kyu;Khorolragchaa, Altanzul;In, Jun-Gyo;Yang, Deok-Chun
    • Journal of Ginseng Research
    • /
    • 제33권4호
    • /
    • pp.249-255
    • /
    • 2009
  • The oxidation of glycolate to glyoxylate, a key step in plant photorespiration, is carried out by the peroxisomal flavoprotein glycolate oxidase (EC 1.1.3.15). To investigate the altered gene expression and the role of GOX in ginseng plant defense system, a cDNA clone containing a GOX gene designated as PgGOX was isolated and sequenced from Panax ginseng. The cDNA was 692 nucleotides long and have an open reading frame of 552 bp with a deduced amino acid sequence of 183 residues. A GenBank BlastX search revealed that the deduced amino acid of PgGOX shares a high degree homology with the Glycine max (95% identity). In the present study we analyzed the expression of PgGOX under various environmental stresses at different times using real time-PCR. The results showed that the expressions of PgGOX increased after various treatments involving salt, light, cold, ABA, SA, and copper treatment.

평판형 태양광반응기를 이용한 복합오염물질의 동시처리 연구 (Simultaneous treatment of Cr(VI) and EDCs using flat type photocatalytic reactor under solar irradiation)

  • 김세원;조혜경;주현규;허남국;이광복;김종오;윤재경
    • 상하수도학회지
    • /
    • 제30권5호
    • /
    • pp.501-509
    • /
    • 2016
  • In this study, a flat-type photocatalytic reactor is applied under solar irradiation for simultaneous treatment of target pollutants: reduction of Cr(VI) to Cr(III) and oxidation of EDCs (BPA, EE2, E2). An immobilized type of photocatalyst was fabricated to have self-grown nanotubes on its surface in order to overcome limitations of powdery photocatalyst. Moreover, Ti mesh form was chosen as substrate and modified to have both larger surface area and photocatalyst content. Ti mesh was anodized at 50V and $25^{\circ}C$ for 30min in the mixed electrolytes ($NH_4F-H_2O-C_2H_6O_2$) and annealed at $450^{\circ}C$ for 2 hours in ambient oxygen to have anatase structure. Surface characterization was done with SEM and XRD methodologies. Fabricated NTT was applied to water treatment, and coexisting Cr(VI) and organics (EDCs) enhanced each other's reactions by scavenging holes and electrons and thus impeding recombination. Also, several experiments were conducted outdoor under direct sunlight and it was observed that both solar-tracking and applying modified photocatalyst were proven to enhance reaction efficiency.

Purification and Characterization of an Antioxidant Protein from Fertilized Eggs

  • Yang, Shaohua;Tang, Zhengjiang;Tang, ShanShan;Zhang, Tingfang;Tang, Fei;Wu, Yu;Wang, Ying;Wang, Lu Lu;Liu, Guoqing
    • 한국축산식품학회지
    • /
    • 제36권6호
    • /
    • pp.791-798
    • /
    • 2016
  • Free radicals may attack cells or tissue, leading to chronic diseases, and antioxidant consumption is potentially useful for removing free radicals. Egg proteins may be used as potential sources of antioxidant considering their ability of scavenging free radicals to apply for food or cosmetics industry. In this study, we obtained a natural antioxidant protein from fertilized eggs, which was a dietary supplement in some Asian countries. Meanwhile, antioxidant activities of these proteins were evaluated using different oxidation systems. With increasing incubation time, the antioxidant activity of these proteins increased during 15 d of incubation. The samples on day 15 were performed for isolation of antioxidant protein. The protein, named P4-1 (MW, 45 kDa), was isolated and purified by consecutive chromatographic methods. P4-1 contained 17 amino acids, which was determined by liquid chromatography-mass spectrometry and Amino Acid Analyzer. Moreover, the amino acid sequence was highly similar to that of ovalbumin. Differential scanning calorimetry showed that the denaturation temperature of P4-1 was $57.16^{\circ}C$. Furthermore, P4-1 suggested high oxygen radical-absorbance activity in ${\cdot}OH$ assays, and its antioxidant activity was stable at $30-50^{\circ}C$ in acidic and neutral pH. Thus, these results revealed that P4-1 may be a potential resource as a natural antioxidant.

Klebsiella pneumoniae 균주의 세포외막에서 분리한 2-furaldehyde dehydrogenase의 특성에 관한 연구 (Characterization of the Outer Membrane-Associated 2-Furaldehyde Dehydrogenase from Klebsiella pneumoniae)

  • 이준우;강사욱;하영칠;한홍의
    • 미생물학회지
    • /
    • 제26권3호
    • /
    • pp.197-206
    • /
    • 1988
  • Klebsiella pneumoniae의 세포외막으로부터 2-furaldehyde를 2-furoic acid로 산화시키는 2-furaldehyde dehydrogenase를 분리하여 그 특성을 조사하였다. 이 효소는 $\beta$-$NAD^{+}$를 특이적으로 요구하였다. 분리과정중의 효소활성도는 2-furaldehyde를 기질로 사용하고 $\beta$-$NAD^{+}$를 조효소로 사용하면서 high performance liquid chromatography에 의해 측정 되었다. 세포외막은 Percoll의 밀도흉배에 의한 초원심분리방법과 $Mg^{2+}$, Triton X-100으로 용해시킨 후, 초원심분리시키는 방법으로 수집되었다. 세포외막단백질은 EDTA와 lysozyme을 처리함으로서 얻어졌고, 효소는 QAE-Sephadex Q-504 S Sephadex G-100-을 사용하면서 column chromatography 방법에 의해 분리되었다. 본 효소는 $85^{\circ}C$, PH9.5, 그리고 1.5% (vol/vol) Triton X-100의 존재하에서 최대활성을 보여주었다. 효소의 분자량은 nondenaturing polyacrylamide gel e electrophoresis의 결과, 88, 000.으로 추정되었고, 2-furaldehyde에 대한 효소의 Km값은 4.72 mM 이였다.

  • PDF

Synthesis and Electrochemical Characterization of Reduced Graphene Oxide-Manganese Oxide Nanocomposites

  • Lee, Yu-Ri;Song, Min-Sun;Lee, Kyung-Min;Kim, In-Young;Hwang, Seong-Ju
    • Journal of Electrochemical Science and Technology
    • /
    • 제2권1호
    • /
    • pp.1-7
    • /
    • 2011
  • Nanocomposites of reduced graphene oxide and manganese (II,III) oxide can be synthesized by the freeze-drying process of the mixed colloidal suspension of graphene oxide and manganese oxide, and the subsequent heat-treatment. The calcined reduced graphene oxide-manganese (II,III) oxide nanocomposites are X-ray amorphous, suggesting the formation of homogeneous and disordered mixture without any phase separation. The reduction of graphene oxide to reduced graphene oxide upon the heat-treatment is evidenced by Fourier-transformed infrared spectroscopy. Field emission-scanning electronic microscopy and energy dispersive spectrometry clearly demonstrate the formation of porous structure by the house-of-cards type stacking of reduced graphene oxide nanosheets and the homogeneous distribution of manganese ions in the nanocomposites. According to Mn K-edge X-ray absorption spectroscopy, manganese ions in the calcined nanocomposites are stabilized in octahedral symmetry with mixed Mn oxidation state of Mn(II)/Mn(III). The present reduced graphene oxide-manganese oxide nanocomposites show characteristic pseudocapacitance behavior superior to the pristine manganese oxide, suggesting their applicability as electrode material for supercapacitors.

액상소결법에 의한 탄화규소 제조시 소결조제와 온도의 영향 (Influence of Sintering Additives and Temperature on Fabrication of LPS-SiC)

  • 정헌채;윤한기
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2004년도 학술대회지
    • /
    • pp.266-270
    • /
    • 2004
  • SiC materials have been extensively studied for high temperature components in advanced energy system and advanced gas turbine because it has excellent high temperature strength, low coefficient of thermal expansion, good resistance to oxidation and good thermal and chemical stability etc. However, the brittle characteristics of SiC such as low fracture toughness and low strain-to fracture still impose a severe limitation on practical applications of SiC materials. For these reasons, SiC/SiC composites can be considered as a promising for various structural materials, because of their good fracture toughness compared with monolithic SiC ceramics. But, high temperature and pressure lead to the degradation of the reinforcing jiber during the hot pressing. Therefore, reduction of sintering temperature and pressure is key requirements for the fabrication of SiC/SiC composites by hot pressing method. In the present work, monolithic Liquid Phase Sintered SiC (LPS-SiC) was fabricated by hot pressing method in Ar atmosphere at $1800^{\circ}C$ under 20MPa using $Al_2O_3,\;Y_2O_3\;and\;SiO_2$ as sintering additives in order to low sintering temperature and sintering pressure. The starting powder was high purity $\beta-SiC$ nano-powder with all average particle size of 30mm. The characterization of LPS-SiC was investigated by means of SEM and three point bending test. Base on the composition of sintering additives-, microstructure- and mechanical property correlation, tire compositions of sintering additives are discussed.

  • PDF

액체 이산화탄소의 전과정목록(LCI) DB 구축에 관한 연구 (Development of Life Cycle Inventory (LCI) Database for Production of Liquid CO2)

  • 이수선;김영실;안중우
    • 청정기술
    • /
    • 제21권1호
    • /
    • pp.33-38
    • /
    • 2015
  • 본 연구에서는 전과정평가 방법론을 활용하여 액체 이산화탄소 제조 공정에 대한 전과정목록 DB를 구축하였다. 특성화와 정규화 결과, 액체 이산화탄소의 제조는 자원소모, 지구온난화 범주가 주로 영향을 미치며, 다음으로 산성화, 부영양화, 광화학적산화물생성 순이었다. 투입물의 기여도에서는 대부분의 영향범주에서 전력이 가장 높았으며 산성화와 부영양화에는 대기배출이 높은 기여도를 나타내었다. 오존층 파괴 범주의 경우 암모니아가 주된 원인이었다. 본 액체 이산화탄소 LCI DB를 통하여 탄소성적표지 등의 국가적 차원의 환경 전략 활용이 활성화되기를 기대한다.

Differential Expression of Laccase Genes in Pleurotus ostreatus and Biochemical Characterization of Laccase Isozymes Produced in Pichia pastoris

  • Park, Minsa;Kim, Minseek;Kim, Sinil;Ha, Byeongsuk;Ro, Hyeon-Su
    • Mycobiology
    • /
    • 제43권3호
    • /
    • pp.280-287
    • /
    • 2015
  • In this study, transcriptome analysis of twelve laccase genes in Pleurotus ostreatus revealed that their expression was differentially regulated at different developmental stages. Lacc5 and Lacc12 were specifically expressed in fruiting bodies and primordia, respectively, whereas Lacc6 was expressed at all developmental stages. Lacc1 and Lacc3 were specific to the mycelial stage in solid medium. In order to investigate their biochemical characteristics, these laccases were heterologously expressed in Pichia pastoris using the pPICHOLI-2 expression vector. Expression of the laccases was facilitated by intermittent addition of methanol as an inducer and sole carbon source, in order to reduce the toxic effects associated with high methanol concentration. The highest expression was observed when the recombinant yeast cells were grown for 5 days at $15^{\circ}C$ with intermittent addition of 1% methanol at a 12-hr interval. Investigation of enzyme kinetics using 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS) as a substrate revealed that the primordium-specific laccase Lacc12 was 5.4-fold less active than Lacc6 at low substrate concentration with respect to ABTS oxidation activity. The optimal pH and temperature of Lacc12 were 0.5 pH units and $5^{\circ}C$higher than those of Lacc6. Lacc12 showed maximal activity at pH 3.5 and $50^{\circ}C$, which may reflect the physiological conditions at the primordiation stage.