• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.99-110
• /
• 2018

In this study, oil of Platycodon grandiflorum seeds was prepared using supercritical carbon dioxide extraction (SCE) and its physicochemical indices as a new edible oil were investigated. Compared to Soxhlet solvent extraction, SCE under the condition of 6,000 psi at $40^{\circ}C$ produced more oil, especially from the roasted seeds to 32.7%. TLC analysis showed triacylglycerols accounted for most of the oil obtained from roasted Platycodon grandiflorum seeds by SCE similarly to commercial soybean oil or perilla seeds oil. The oil had highly unsaturated lipid with considerable amount of linoleic acid(73.27%) much more than two commercial oils followed by oleic acid(13.16%). Physicochemical properties of the oil were as follows; specific gravity, 0.92; dynamic viscosity, 45.37 cP; refractive index, 1.48; color, L=47.30, a=-3.69, b=25.72; iodine value, 141.57 g $I_2/100g$ oil; saponification value, 191.21 mg of KOH/g of oil; acid value, 2.60 mg of KOH/g of oil. Among those, refractive index, viscosity and iodine value, which were related to unsaturation degree of lipid, were ranged between those of two commercial oils. The oxidation stability of oil(2.03 hr) was also ranged between less stable perilla seeds oil(1.79 hr) and more stable soybean oil(2.94 hr) based on the induction time measured by Rancimat assay. In addition to extraction yield increase, seeds roasting provided further benefits such as reductions of cholesterol ester content and acid value without change in fatty acid composition. In conclusion, oil was extracted from the roasted Platycodon grandiflorum seeds at high yield by supercritical carbon dioxide and it seemed to have proper characteristics as a edible oil.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.765-773
• /
• 2000

The degradation of humic acid using $TiO_2$ coatings was studied, $TiO_2$ coatings were prepared by dip-coating method. Sol solutions for coating were prepared by mixing the gel, which can be produced by the reaction of $TiOCl_2$ and $NH_4OH$ solution, and hydrogen peroxide solution, and hydrolysis of titanium tetraisopropoxide (TTIP). It was shown from XRD that coatings from sol aged at $100^{\circ}C$ for 18h with titanium peroxo solution were crystallized to anatase in the range of temperatures of $25^{\circ}C$ to $500^{\circ}C$. In contrast, those coated from TTIP were crystallized to anatase at temperature above $400^{\circ}C$. So the sols originated from $TiCl_4$ can be applied for not only on the heat-resistance substrates but on the plastic substrates. Thickness and the quality of the films were dependent on the withdrawing speed, the concentration of sol, and the number of coating. The films showed various interference colors depending on the thickness of them. In the case that the films coated 2 times at withdrawing speed of 2.5cm per minute by 0.2M sol, the films had a transparent light blue color with thickness of around 50nm. It was known from the result of photo-degradation by $TiO_2$ coatings using humic acid that the removal efficiency of $COD_{cr}$ was over 85% after illumination of $UV/H_2O_2$ for 40min. and that of UV/VIS absorbable materials was over 95%.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.9
• /
• pp.33-40
• /
• 2022

Sedimentation and pH neutralization has been investigated as preteatment of acid contaminate water. The settling and neutralizing process derive more effective degradation efficiency as the pre-treatment process before the removal process of adsorption, volatile, biodegradation, or oxidation. Settling velocity, uniformity coefficient, coefficient of curvature, and grain size index can define in the sedimentation process for characteristics of the soil. The stainless steel sieve has been used to separate each particle size of the dry soil by assembling in order of 4, 10, 20, 40, 80, 100, and 200 mesh sizes. The soil from Gamcheon Port in Busan drops upper side of the sieve and shakes back and forth to separate each different size of the particle. The 1L of Imhoff cone and 200 mL of the mass cylinder were used as settling tanks to calculate settling velocity. Stokes' equation was used to figure out the average density of dry soil with a value from settling velocity. In the results, the average particle density and lowest settling velocity were 1.93 g/cm³ and 0.11 cm/s, respectively. These values can detect the range of settling points of sediment to prevent chemical accidents. In pH neutralization, the initial pH of 2, 3, 4, and 5 of nitric acid and sulfuric acid are used as an acid solution; 0.1, 0.01, and 0.001 M of sodium hydroxide and calcium hydroxide are used as a base solution. The main goal of this experiment is to figure out the volume percentage of the acid solution becomes pH 7. The concentration of 0.001 M of base solution exceeds all the conditions, 0.01 M exceeds partially, and 0.1 M does not exceed 5 v/v% except pH 2. Calcium hydroxide present less volume than sodium hydroxide at pH neutralization both sulfuric and nitric acid.

• Journal of Life Science
• /
• v.20 no.2
• /
• pp.260-268
• /
• 2010

The lactate dehydrogenase (EC 1.1.1.27, LDH) isozymes in tissues from Channa argus were purified and characterized by biochemical, immunochemical and kinetic methods. The activity of LDH in skeletal muscle was the highest at 380.4 units and those in heart, eye and brain tissues were 13.4, 3,5 and 5.4 units, respectively. Citrate synthase (EC 4.1.3.7, CS) activity in heart tissue was the highest at 20.7 units. LDH/CS in skeletal muscle, heart, eye and brain tissues were 172.9, 0.6, 0.32 and 0.47. Protein concentration in skeletal muscle tissue was 14.7 mg/g and specific activities of LDH in skeletal muscle, heart, eye and brain tissues were 25.88, 0.79, 0.31 and 1.38 units/mg, respectively. Therefore, skeletal muscle tissue was anaerobic and heart tissue was aerobic. The LDH isozymes in tissues were identified by polyacrylamide gel electrophoresis, immunoprecipitation and Western blot with antiserum against $A_4$, $B_4$, and eye-specific $C_4$. LDH $A_4$, $A_3B$, $A_2B_2$. $AB_3$ and $B_4$ isozymes were detected in every tissue, $C_4$, $AC_3$, $A_2C_2$ and $A_3C$ were detected in eye tissue, and $A_3C$ was found in brain tissue. LDH $A_4$, $A_3B$, $A_2B_2$, $AB_3$, $B_4$, eye-specific $C_4$ isozymes were purified by affinity chromatography and Preparative PAGE Cells. The LDH $A_4$ isozyme was purified in the fraction from elution with $NAD^+$ containing buffer of affinity chromatography. Eye-specific $C_4$ isozyme was eluted right after $A_4$, after which $B_4$ isozyme was eluted with plain buffer. As a result, one part of molecular structures in $A_4$, $B_4$ and eye-specific $C_4$ were similar, but were different from each other in $B_4$ and $C_4$. Therefore the subunit A may be conservative in evolution, and the evolution of subunit B seems to be faster than that of subunit A. The activity of LDH $A_4$, $A_2B_2$, $B_4$, and eye-specific $C_4$ isozymes remained at 39.98, 21.28, 19.67 and 16.87% as a result of the inhibition by 10 mM of pyruvate, so the degree of inhibition was very high. The $Km^{PYR}$ values were 0.17, 0.27 and 0.133 mM in $A_4$, $B_4$ and eye-specific $C_4$ isozymes, respectively. The optimum pH of LDH $A_4$, $B_4$, eye-specific $C_4$, $A_2B_2$, $A_3B$, and $AB_3$ were pH 6.5, pH 8.5, pH 5.5, pH 6.0-6.5, pH 5.0 and pH 7.5. The $A_4$ and heterotetramer isozymes stabilized a broad range of pH. Especially, LDH activities in skeletal muscle tissue were high, resulting in a high degree of muscle activity.LDH metabolism in eye tissue seems to be converted faster from pyruvate to lactate by eye-specific $C_4$ isozyme as eye-specific $C_4$ have the highest affinity for pyruvate, and right after the conversion, oxidation of lactate was induced by $A_4$ isozyme. It was found that expression of Ldh-C, affinity to substrate and reaction time of $C_4$ isozyme were different according to the ecological environmental and feeding capturing patterns.