• Journal of Biosystems Engineering
• /
• v.13 no.3
• /
• pp.32-43
• /
• 1988

This study was attempted to investigate the pneumatic separation on separating unit of a combine harvester. The aerodynamic characteristics of threshed materials were analyzed by experiments. The air velocity distribution within the separation chamber was measured for various speeds of the winnower and suction fans to find out the operational and design conditions of the separating unit which would serve for reducing the grain loss from chaff outlet. The results of study arc summarized as follows: 1. Based on the separation curve of threshed materials analyzed, it was shown that three different kind. of materials-kernels, straw chaff, and leaf chaff were as a whole able to be separated pneumatically, regardless of varieties. However, a small amount of the separation grain loss may be expected to occur if the complete separation between kernels and straw chaff would be undertaken because some portion of their separation curve were overlapping. 2. The analysis of air velocity distribution showed that the separation chamber may be divided into two regions, the discharging and separating. The air velocity of the discharging region was 5-15 m/s and that of the separating region 2-5 m/s. 3. The air movement of the separation chamber may be a turbulence flow, being its speed became greater as it moves from the left to the right section of the separation chamber. The equi-speed line. of air flow had a steep gradient in between the discharging and the separation regions. The air velocity in the discharging region was much higher than the terminal velocity of kernels, because of which those kernels appearing in the region could be possibly exhausted as the grain loss from the chaff outlet. 4. The motion trajectory of threshed material in the separating region was dominantly affected by the winnower fan, on the other hand, its motion in the discharging region was affected by suction fan. 5. The grain loss from the chaff outlet was affected greatly by the winnower fan and the trace of kernel movement. It was observed that the optimum working speed to give minimum grain loss from chaff outlet for the combine tested should be maintained at 950~1,150 rpm for the winnower fan and 1,850 rpm for the suction fan. 6. It was shown that a large portion of grain loss from chaff outlet may occur when the kernels may bump against a portion of separation chamber wall and those kernels thus scattered into the discharging region were sucked by the suction fan. It was accordingly recommended that a new design of the wall of separation chamber so as to bump down kernels may be necessary to reduce grain loss from the chaff outlet.

• Genomics & Informatics
• /
• v.14 no.4
• /
• pp.196-204
• /
• 2016

Many researchers have found that one of the most important characteristics of the structure of linkage disequilibrium is that the human genome can be divided into non-overlapping block partitions in which only a small number of haplotypes are observed. The location and distribution of haplotype blocks can be seen as a population property influenced by population genetic events such as selection, mutation, recombination and population structure. In this study, we investigate the effects of the density of markers relative to the full set of all polymorphisms in the region on the results of haplotype partitioning for five popular haplotype block partition methods: three methods in Haploview (confidence interval, four gamete test, and solid spine), MIG++ implemented in PLINK 1.9 and S-MIG++. We used several experimental datasets obtained by sampling subsets of single nucleotide polymorphism (SNP) markers of chromosome 22 region in the 1000 Genomes Project data and also the HapMap phase 3 data to compare the results of haplotype block partitions by five methods. With decreasing sampling ratio down to 20% of the original SNP markers, the total number of haplotype blocks decreases and the length of haplotype blocks increases for all algorithms. When we examined the marker-independence of the haplotype block locations constructed from the datasets of different density, the results using below 50% of the entire SNP markers were very different from the results using the entire SNP markers. We conclude that the haplotype block construction results should be used and interpreted carefully depending on the selection of markers and the purpose of the study.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.806-816
• /
• 2009

Character recognition system consists of four step; text localization, text segmentation, character segmentation, and recognition. The character segmentation is very important and difficult because of noise, illumination, and so on. For high recognition rates of the system, it is necessary to take good performance of character segmentation algorithm. Many algorithms for character segmentation have been developed up to now, and many people have been recently making researches in segmentation of touching or overlapping character. Most of algorithms cannot apply to the text regions of management number marked on the slab in steel image, because the text regions are irregular such as touching character by strong illumination and by trouble of nozzle in marking machine, and loss of character. It is difficult to gain high success rate in various cases. This paper describes a new algorithm of character segmentation to recognize slab management number marked on the slab in the steel image. It is very important that pre-processing step is to convert gray image to binary image without loss of character and touching character. In this binary image, non-touching characters are simply separated by using vertical projection profile. For separating touching characters, after we use combined profile to find candidate points of boundary, decide real character boundary by using method based on recognition. In recognition step, we remove noise of character images, then recognize respective character images. In this paper, the proposed algorithm is effective for character segmentation and recognition of various text regions on the slab in steel image.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.3
• /
• pp.450-456
• /
• 2006

Pseudomonas fluorescens MC07 is a growth-promoting rhizobacterium that suppresses mycelial growth in fungi such as Rhizoctonia solani, Pythium ultimum, Fusarium oxysporum, and Phytophthora capsici. To determine the role of the bacterium's antifungal activity in disease suppression, we screened 2,500 colonies generated by Tn5lacZ insertions, and isolated a mutant 157 that had lost antifungal activity. The EcoRI fragment carrying Tn5lacZ was cloned into pBluescript II SK(+) and used as a probe to isolate wild-type clones from a genomic library of the parent strain, MC07. Two overlapping cosmid clones, pEH4 and pEH5, that had hybridized with the mutant clone were isolated. pEH4 conferred antifungal activity to the heterologous host P.fluorescens strain 1855.344, whereas pEH5 did not. Through transposon mutagenesis of pEH4 and complementation analyses, we delineated the 14.7-kb DNA region that is responsible for the biosynthesis of an antifungal compound. DNA sequence analysis of the region identified 11 possible open reading frames (ORF), ORF1 through ORF11. A BLAST search of each putative protein implied that the proteins may be involved in an antifungal activity similar to polyketides.

• The Journal of Korean Society of Virology
• /
• v.29 no.2
• /
• pp.107-118
• /
• 1999

To characterize the molecular nature of human immunodeficiency virus (HIV)-1, we determined the full-length HIV-1 sequences from cultured peripheral blood mononuclear cells (PBMC) of a Korean long-term nonprogressor (LTNP). Without antiretroviral therapy, the individual has maintained CD4+ T counts over $500/{\mu}l$ from 1989 to 1999. Plasma viral RNA copy was 992 U/ml in 1998. Culture supernatant showed positive from culture days 9. A series of 9 overlapping PCR products were amplified from cultured PBMC and cloned About 9.2 kb from R of 5' LTR to R of 3' LTR was determined by automated sequencing. The G-to-A hypermutations were shown throughout the entire region. As a result of G to A hypermutations, premature stop codon was found in integrase coding region. Though there was no recombination between subtypes over all genomes, TATA box in both LTRs was TAAAA which is detected in subtype E instead of TATAA in subtype B. And, there were nucleotide GC insertion between $NF-{\kappa}B$ I and Sp1 III, and duplication of $TCF-1{\alpha}$ in LTR. We could not find any deletion of amino acid in Nef, Gag, Pol and Env gene. This study is the first report on molecular nature of full genomes of HIV-1 isolated in Korea.

• Journal of Life Science
• /
• v.17 no.2 s.82
• /
• pp.204-210
• /
• 2007

Previous reports indicated that the carboxyl terminal residues, glutamine276-threonine277 in particular, were important for actin affinity of the unacetylated smooth ${\alpha}-tropomyosin$. To determine the role of the glutamine and threonine residues in C-terminal region in actin binding, we constructed mutant striated muscle ${\alpha}-tropomyosin$ (TMs), in which these two residues were individually substituted. These mutant tropomyosins, designated TM18 (HT) and TM19 (QA), were overexpressed in E. coli as an either unacetylated form or Ala-Ser. (AS) dipeptide fusion form, and were analyzed F-actin affinity by cosedimentation. Unacetylated TM19 (QA) bound to actin approximately three times stronger than TM18 (HT) and much stronger than ST (HA). AS/TM19 (QA) showed four times stronger, in actin affinity than AS/ST (HA) while AS/TM14 (QT) bound to actin stronger to some extent than AS/TM18 (HT). These results suggested that the presence of Gln residue at 276 be primarily attributed to higher actin affinity of smooth ${\alpha}-tropomyosin$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.3
• /
• pp.315-322
• /
• 2000

DSM(Digital Surface Model) is a digital model which represents the surface elevation of a region. DSM is necessary for orthoimage generation, and frequently used in man-made object extraction from aerial photographs nowadays. Image matching technique enables automatic DSM generation. This proposed a image matching method which can be applied to automatic generation of DSM for Built-up Area. The matching method proposed is to find conjugate points and conjugate lines from overlapping aerial images. In detecting conjugate points, the positional relation between possible conjugate point pair as well as correlation of pixel gray value is compared. In detecting conjugate lines, the color attribute of flank region of line, shape of line, positional relation between neighborhood points and lines, and the connection relation between lines are compared. The proposed matching method is assumed to be useful for DSM generation including Built-up Area.

• Journal of Korea Port Economic Association
• /
• v.19 no.2
• /
• pp.1-32
• /
• 2003

The purpose of this study is to identify and evaluate the competitiveness of ports in ASEAN(Association of Southeast Asian Nations), which plays a leading role in basing the hub of global logistics strategies as a countermeasure in changes of logistics environments. This region represents most severe competition among Mega Hub ports in the world in terms of container cargo throughput at the onset of the 21st century. The research method in this study accounted for overlapping between attributes, and introduced the HFP method that can perform mathematical operations. The scope of this study was strictly confined to the ports of ASEAN, which cover the top 100 of 350 container ports that were presented in Containerization International Yearbook 2002 with reference to container throughput. The results of this study show Singapore in the number one position. Even when we compare with major ports in Korea (after getting comparative ratings and applying the same data and evaluation structure), the number one position still goes to Singapore and then Busan(2) and Manila(2), followed by Port Klang(4), Tanjung Priok(5), Tanjung Perak(6), Bangkok(7), Inchon(8), Laem Chabang(9) and Penang(9). In terms of the main contributions of this study, it is the first empirical study to apply the combined attributes of detailed and representative attributes into the advanced HFP model which was enhanced by the KJ method to evaluate the port competitiveness in ASEAN. Up-to-now, none has comprehensively conducted researches with sophisticated port methodology that has discussed a variety of changes in port development and terminal transfers of major shipping lines in the region. Moreover, through the comparative evaluation among major ports in Korea and ASEAN, the presentation of comparative competitiveness for Korean ports is a great achievement in this study. In order to reinforce this study, it needs further compensative research, including cost factors which could not be applied to modeling the subject ports by lack of consistently quantified data in ASEAN.

• Journal of the Korea Computer Graphics Society
• /
• v.24 no.5
• /
• pp.11-19
• /
• 2018

In this paper, we propose an algorithm for improving the accuracy and rate of convergence when two point clouds with noise and a low overlapping area are registered to each other. We make the most use of the geometric information of the underlying geometry of the point clouds with noise for better accuracy. We select a reasonable region from the noisy point cloud for registration and combine a modified acceleration algorithm to improve its speed. The conventional accuracy improvement method was not possible in a lot of noise, this paper resolves the problem by selecting the reasonable region for the registration. And this paper applies acceleration algorithm for a clone to low overlap point cloud pair. A simple algorithm is added to the conventional method, which leads to 3 or 4 times faster speed. In conclusion, this algorithm was developed to improve both the speed and accuracy of point cloud registration in noisy and low overlap case.

• Journal of the Korean Society for Library and Information Science
• /
• v.58 no.3
• /
• pp.65-89
• /
• 2024

This study developed a model to classify news articles into categories of topic, genre, and region using a Korean Pre-trained Language model. To achieve this, a new news article classification system was designed by referring to the classification systems of domestic media outlets. The topic and genre classification models were implemented as hierarchical classification models that link the main categories and subcategories, and their performance was compared with that of an integrated category model. The evaluation results showed that the hierarchical structure classification model had the advantage of providing more precise categorization in ambiguous or overlapping categories compared to the integrated category model. For regional classification of news articles, a model was built to classify into 18 categories, and for regional news articles, the regional characteristics were clearly reflected in the text, resulting in high performance. This study demonstrated the effectiveness of classifying news articles from multiple perspectives-topic, genre, and region-and emphasized the significance of suggesting the potential for a multi-dimensional news article classification service that meets user needs.