• Journal of KIISE:Information Networking
• /
• v.35 no.4
• /
• pp.301-310
• /
• 2008

In the existing literature, the handover process reveals numerous problems manifested by high movement detection latency. FMIPv6 can reduce packet loss using a tunnel-based handover mechanism. However, this mechanism may cause performance degradation due to the out-of-sequence packets. Recently. Proxy Mobile IPv6 is proposed for network-based mobility management to reduce overhead in mobile node. PMIPv6 can decrease handover latency which related overhead in MN by using network agent. In this paper, we proposed optimized fast handover scheme called Fast Proxy Mobile IPv6 (EF-PMIPv6). The proposed EF-PMIPv6 can support fast handover using fast IAPP and ND schemes. Further, a mathematical analysis is provided to show the benefits of our scheme. In the analysis, various parameters are used to compare our scheme with the current procedures, while our approach focuses on the reduction of handover latency.

• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.171-178
• /
• 2007

In mobile ad hoc networks, an application scenario requires mostly group mobility behavior in the mix of group moving nodes and individually moving nodes. The nodes of those applications tend to belong to the movement group with similar movement behavior. Group mobility is one of the good methods to improve scalability, and reduces the protocol overhead. In this paper, we propose the multicast architecture which regards nodes that have equal group mobility in the heterogeneous group mobility network as the single entity with the multiple interfaces and composes multicast tree, The logical cooperative entity-based multicast architecture accommodates the scalability, the multicast tree simplification, and the protocol overhead reduction which arc obtained from the hierarchical multicast architecture, while it maintains the nat multicast architecture for the data transmission. It also prevents the concentration of the energy consumption dispersing data forwarding load into the several ingress/egress nodes. Results obtained through simulations show that logical cooperative entity based multicast protocol with multiple interfaces offers the protocol scalability and the efficient data transmission.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.53-56
• /
• 2015

In this paper, we want provide improved services with faster transmission, IEEE 802.11n was standardized. A-MPDU (Aggregation MAC Protocol Data UNIT) is a vital function of the IEEE 802.11n standard, which was proposed to improve transmission rate by reducing frame transmission overhead. In this paper, we show the problems of TCP retransmission with A-MPDU and propose a solution utilizing the property of TCP cumulative ACK. If the transmission of an MPDU subframe fails, A-MPDU mechanism allows selective re-transmission of failed MPDU subframe in the MAC layer. In TCP traffic transmission, however, a failed MPDU transmission causes TCP Duplicate ACK, which causes unnecessary TCP re-transmission. Furthermore, congestion control of TCP causes reduction in throughput. By supressing unnecessary duplicate ACKs the proposed mechanism reduces the overhead in transmitting redundant TCP ACKs, and transmitting only a HS-ACK with the highest sequence number. By using the RACK mechanism, through the simulation results, it was conrmed that the RACK mechanism increases up to 20% compared the conventional A-MPDU, at the same time, it tightly assures the fairness among TCP flows.

• Journal of Advanced Navigation Technology
• /
• v.17 no.2
• /
• pp.189-195
• /
• 2013

In an environment with frequent job requests and short job processing times, thread pool methods are frequently used to increase throughput by reducing overheads due to thread creation and removal. A watermark method normally reduces unnecessary uses of resources by keeping the number of threads less than those needed in the maximum. In the absence of available threads, however, it processes jobs by creating additional threads up to a specified limit so that the system overhead increases due to creation of threads, which results in throughput degradation. This paper presents a history-based dynamic method that alleviates throughput degradation. By estimating and maintaining the number of threads needed for jobs, it reduces overheads due to thread creation and removal. According to experiments, compared to the watermark thread pool method, it shows average 33% increase in the number of threads kept and average 62% reduction in the number of threads created, which results in 6% increase in terms of system throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11B
• /
• pp.1038-1049
• /
• 2003

Exactly measuring traffic load is the basis for efficient traffic engineering. However, precise traffic measurement involves inspecting every packet traversing a lint resulting in significant overhead on routers with high-speed links. Sampling techniques are proposed as an alternative way to reduce the measurement overhead. But, since sampling inevitably accompany with error, there should be a way to control, or at least limit, the error for traffic engineering applications to work correctly. In this paper, we address the problem of bounding sampling error within a pre-specified tolerance level. We derive a relationship between the number of samples, the accuracy of estimation and the squared coefficient of variation of packet size distribution. Based on this relationship, we propose an adaptive random sampling technique that determines the minimum sampling probability adaptively according to traffic dynamics. Using real network traffic traces, we show that the proposed adaptive random sampling technique indeed produces the desired accuracy, while also yielding significant reduction in the amount of traffic samples.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.342-351
• /
• 2008

In this paper, a new handover procedure for OFDM-based multi-hop relay systems is proposed to reduce the handover overhead by distinguishing inter-cell handover event from intra-cell handover event at the level of physical layer using a hierarchical design concept of preamble. A Subcell ID concept for identifying RS in a cell is proposed in the design of hierarchical manner, in addition to the existing Cell ID for identifying BS. The decision on either inter-cell handover or intra-cell handover is made by the signal quality measure of CBINR(Carrier of BS to Interference and Noise Ratio) and CRINR(Carrier of RS to Interference and Noise Ratio), provided by the hierarchical preamble. The proposed handover procedure can simplify scanning procedure and skip/simplify network re-entry procedure (capability negotiation, authorization, registration), resulting in a significant reduction of handover overhead.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.3
• /
• pp.67-72
• /
• 2018

Recently, noise reduction in an axial fan producing the small pressure rise and large flow rate, which is one type of turbomachine, is recognized as essential. This study describes the design and optimization techniques of MPI parallel program to simulate the flow-induced noise in the axial fan. In order to simulate the code using 100 million number of grids for flow and 70,000 points for noise sources, we parallelize it using the 2D domain decomposition. However, when it is involved many computing cores, it is getting slower because of MPI communication overhead among nodes, especially for the noise simulation. Thus, it is adopted the one-sided communication to reduce the overhead of MPI communication. Moreover, the allocated memory and communication between cores are optimized, thereby improving 2.97x compared to the original one. Finally, it is achieved 12x and 6x faster using 6,144 and 128 computing cores of KISTI Tachyon2 than using 256 and 16 computing cores for the flow and noise simulations, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6C
• /
• pp.632-639
• /
• 2002

To reduce the area and power consumption in constant coefficient multiplications, the constant coefficient can be encoded using canonic signed digit(CSD) representation. When the partial product terms are added depending on the nonzero bit(1 or -1) positions in the CSD-encoded multiplier, all sign bits are properly extended before the addition takes place. In this paper, to reduce the overhead due to sign extension, a new method is proposed based on the fact that carry propagation in the sign extension part can be controlled such that a desired input bit can be propagated as a carry. Also, a fixed-width multiplier design method suitable for CSD multiplication is proposed. As an application, 43-tap filbert transformer for SSB/BPSK-DS/CDMA is implemented. It is shown that, about 16∼28% adders can be saved by the proposed method compared with the conventional methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5B
• /
• pp.489-497
• /
• 2009

In the 3GPP LTE and IEEE 802.16m standardizations for IMT-Advanced, the efficient transmission of multicast and broadcast data is one of the important issues to improve system performance. Especially, to guarantee each user's QoS in the multicast group, H-ARQ or adaptive modulation are considered to be adoption, however, reduction of feedback overhead is one of the most important issues. In this paper, performance of the previously proposed OOK (On-Off Keying) based common ACK/NACK feedback channel is analyzed through theoretical analysis and simulation. Based on the results, system parameter optimization methods for common feedback channel are proposed. In addition, through computer simulation, it is shown that the common feedback method according to the proposed feedback parameter optimization can feedback ACK/NACK information for multicast H-ARQ transmission, more reliably than the conventional user dedicated feedback method in 3GPP LTE systems, and can reduce the feedback overhead as well.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.86-95
• /
• 2019

As the urban development economy is stagnating due to the reduction of the budget for Social Overhead Capital (SOC) and the stabilization policy of the real estate market, there is a steady increase in the interest of domestic construction companies to enter the overseas market. However, domestic construction companies are showing a decline in overseas urban development market as compared with advanced foreign companies having excellent financial management and overseas project management ability. Therefore, it is necessary for domestic companies to select an urban development model that meets the environment and the level of the country of entry, and to establish an advance strategy to manage the risks of overseas business. For this purpose, the factors of entry into the overseas urban development market through the existing research, literature analysis, and FGI were derived, and survey strategy and IPA analysis were conducted to develop strategies for entering the overseas urban development market. As a result, we have established a strategy for private companies to enter the overseas urban development market.