• Title/Summary/Keyword: overall strain

Search Result 449, Processing Time 0.023 seconds

Total Ammonia Nitrogen Excretion Rates and Feces Production Rates as an Index for Comparing Efficiency of Dietary Protein Utilization of Offsprings from Selected Korean Strain, Cultured Japanese Strain and Their Intraspecific Hybrid Strain of Juvenile Red Sea Bream, Pagrus major (한국산 선발 계통, 일본산 양식 계통 그리고 이들 두 계통간 잡종 계통 참돔 치어의 총 암모니아성 질소 배설률 및 분 배출률을 통한 사료내 단백질 이용 효율 비교)

  • Oh, Sung-Yong;Noh, Choong-Hwan;Hong, Kyung-Pyo;Kim, Jong-Man
    • Ocean and Polar Research
    • /
    • v.26 no.3
    • /
    • pp.415-423
    • /
    • 2004
  • An experiment was conducted to investigate the differences of total ammonia nitrogen (TAN) excretion rates and feces production rates among the offsprings from cultured Japanese strain (JJ, mean BW; $17.1{\pm}0.1g$), intraspecific hybrid strain between cultured Japanese and selected Korean strain (JK, mean BW: $17.1{\pm}0.1g$) and selected Korean strain(KK, mean BW: $21.5{\pm}0.1g$) of red sea bream in order to compare their dietary protein utilization efficiency. Fish were hand-fed with a commercial diet containing 46.7% crude protein for 2 weeks, three times daily 09:00, 13:00 and 17:00. After daily feeding, the TAN excretion rates reached peaks of 49.03, 58.75 and 36.26mg/kg fish/hr for the JJ, JK and KK strain, respectively, during the daytime. The value of the KK strain was significantly lower than that of the JJ and JX shuin (P<0.05), however daily TAN excretion rates of the JJ, JK and KK strain were not different (P>0.05). When fish were fed at satiation after 4 days of starvation, TAN excretion rates reached the maximum values 4 hours after the feeding fur the KK (31.23 mg/kg fish/hr) and 6 hours after the feeding fur the JJ (44.19 mg/tg fish/hr) and JK strain (41.70 mg/kg fish/hr). After 3 days of starvation, the daily endogenous TAU excretion rates (ETE) for the JJ, JK. and KK strain were 286.91, 215.66 and 179.29mg/kg fish/day, respectively. The value of the KK strain was lower than that of the JJ and JK strain (P<0.05). The total feces production rates of the JJ, JK and KK strain were not significantly different, however the proportions of feces production rates by time for the JJ, JK and KK strain were different (P<0.05). As overall results, efficiency of dietary protein utilization of JJ, JK and KK seems to be different and KK strain could offer a desirable option for aquaculture purpose.

Unique local deformations of the superelastic SMA rods during stress-relaxation tests

  • Ashiqur Rahman, Muhammad;Rahman Khan, Mujibur
    • Structural Engineering and Mechanics
    • /
    • v.22 no.5
    • /
    • pp.563-574
    • /
    • 2006
  • This paper studies mechanical behavior of the superelastic shape memory alloy (SMA) rods in terms of local deformations and time via tensile loading-unloading cycles for both ends fixed end constraints. Besides the unique stress induced martensitic transformation (SIMT), SMA's time dependent behavior when it is in mixed-phase condition upon loading and unloading, also need careful attention with a view of investigating the local deformation of the structural elements made of the same material. With this perspective, the so-called stress-relaxation tests have been performed to demonstrate and investigate the local strains-total strains relationships with time, particularly, during the forward SIMT. Some remarkable phenomena have been observed pertaining to SIMT, which are absent in traditional materials and those unique phenomena have been explained qualitatively. For example, at the stopped loading conditions the two ends (fixed end and moving end of the tensile testing machine) were in fixed positions. So that there was no axial overall deformation of the specimen but some notable increase in the axial local deformation was shown by the extensometer placed at the middle of the SMA specimen. It should be noted that this peculiar behavior termed as 'inertia driven SIMT' occurs only when the loading was stopped at mixed phase condition. Besides this relaxation test for the SMA specimens, the same is performed for the mild steel (MS) specimens under similar test conditions. The MS specimens, however, show no unusual increase of local strains during the stress relaxation tests.

Experimental Cyclic Behavior of Precast Hybrid Beam-Column Connections with Welded Components

  • Girgin, Sadik Can;Misir, Ibrahim Serkan;Kahraman, Serap
    • International Journal of Concrete Structures and Materials
    • /
    • v.11 no.2
    • /
    • pp.229-245
    • /
    • 2017
  • Post-earthquake observations revealed that seismic performance of beam-column connections in precast concrete structures affect the overall response extensively. Seismic design of precast reinforced concrete structures requires improved beam-column connections to transfer reversed load effects between structural elements. In Turkey, hybrid beam-column connections with welded components have been applied extensively in precast concrete industry for decades. Beam bottom longitudinal rebars are welded to beam end plates while top longitudinal rebars are placed to designated gaps in joint panels before casting of topping concrete in this type of connections. The paper presents the major findings of an experimental test programme including one monolithic and five precast hybrid half scale specimens representing interior beam-column connections of a moment frame of high ductility level. The required welding area between beam bottom longitudinal rebars and beam-end plates were calculated based on welding coefficients considered as a test parameter. It is observed that the maximum strain developed in the beam bottom flexural reinforcement plays an important role in the overall behavior of the connections. Two additional specimens which include unbonded lengths on the longitudinal rebars to reduce that strain demands were also tested. Strength, stiffness and energy dissipation characteristics of test specimens were investigated with respect to test variables. Seismic performances of test specimens were evaluated by obtaining damage indices.

Epidemiological Characteristics of Rodents and Chiggers with Orientia Tsutsugamushi in the Republic of Korea

  • Park, Jung Wook;Yu, Dae Sung;Lee, Gi Seong;Seo, Jin Jong;Chung, Jae Keun;Lee, Jae Il
    • Parasites, Hosts and Diseases
    • /
    • v.58 no.5
    • /
    • pp.559-564
    • /
    • 2020
  • A survey of rodents and chiggers associated with Orientia tsutsugamushi was conducted in a rural region of the Republic of Korea (Korea) between 2014 and 2018. Overall Apodemus agrarius 15.2% had the highest seropisitive for O. tsutsugamushi, followed by Myodes regulus 11.4%. Monthly risk factors using logistic regression analysis were not associated with O. tsutsugamushi infections in rodents. The overall prevalence rate of O. tsutsugamushi among chiggers was 0.3%. The chigger (Leptotrombidium scutellare) and monthly (October) risk factors were associated with O. tsutsugamushi human infections (P<0.05). Orientia tsutsugamushi infections are endemic in rodents in Korea and people, for example, soldiers who are active outdoors, must employ preventive measures, especially during October (P<0.05). When there are many reports of O. tsutsugamushi infections in Korea. The Boryong strain 85.7% (2/14) was the most common strain detected in chiggers, followed by the Shimokoshi 7.1% (1/14) and Karp 7.1% strains.

Diagnostic Potential of Strain Ratio Measurement and a 5 Point Scoring Method for Detection of Breast Cancer: Chinese Experience

  • Parajuly, Shyam Sundar;Lan, Peng Yu;Yun, Ma Bu;Gang, Yang Zhi;Hua, Zhuang
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.13 no.4
    • /
    • pp.1447-1452
    • /
    • 2012
  • Aim: To evaluate the differential diagnostic potential of lesion stiffness assessed by the sonoelastographic strain index ratio (SR) and elastographic color scoring system (UE) for breast lesions. Materials and Methods: Three hundred and forty two breast masses (158 benign and 184 malignant) from 325 consecutive patients (mean age 44.2 years; range 16-81)who had been scheduled for a sonographically guided core biopsy were examined proposed by Itoh et al, with scoring 1-3=benign and 4-5=malignant. Strain and area ratios of each lesion were calculated within the same machine. Histological diagnosis was used as the reference standard. The area under the curve (AUC) and cut-off point were obtained by receiver operating curve and the cross table Fischer Test was carried out for assessing diagnostic value. Sensitivity, specificity, PPV, NPV, accuracy and false-discovery rates were compared. Results: The mean strain ratios for benign and malignant lesions were 1.87 and 7.9 respectively. (P<0.0001). When a cutoff point of 3.54 was used, SR had a sensitivity of 94.6%, a specificity 94.3%, a PPV of 95.1%, an NPV of 93.7% and an accuracy of 94.4%. The AUC values were 0.90 for the 5 point scoring system (UE) and 0.96 for the strain index ratio. The overall diagnostic performance was SR method was better (P<0.05). Conclusions: Strain ratio measurement could be another effective predictor in elastography imaging besides 5 the point scoring system for differential diagnosis of breast lesions.

Determination of the Fatigue Limit by Using a Tensile Testing Data (인장 실험 데이터를 이용한 피로한도 결정에 관한 연구)

  • Kim, Tae-Hun;Kim, Hak-Yun;O, Heung-Guk;Jin, Eok-Yong
    • Korean Journal of Materials Research
    • /
    • v.10 no.2
    • /
    • pp.155-159
    • /
    • 2000
  • Microstructural processes during high cycle fatigue are investigated according to plastic-strain hardening, crack formation, crack propagation and fracture. It is shown that the fatigue test resembles the uniaxial tensile test. The logarithm of the number of cycles to failure is proportional to the elongation in the tensile test. Under high cycle fatigue test, the strain is normally elastic. If the strain is absolutly elastic, fatigue could not result. But this is over simplication. Nearly all metals undergo a minor amount of plastic strain even at low stress. Damage accumulation leadling to crack formation can continue in the persistent slip bands at very low average plastic strain amplitude. In the ten­s sile test the overall specimen follows the failure procedure whilst in the high cycle fatigue test the local persistent slip band follows the failure procedure. However accumulations of strain per unit volume in the deforming region before failure in both cases are equal locally.

  • PDF

Isolation and Characterization of Five Isolates of Tetraselmis sp. with Rapid Growth Rates in Low Temperatures (저온 생장성이 우수한 분리 미세조류 Tetraselmis sp. 5개주의 생장 패턴 및 지방산 조성 분석)

  • Park, Hanwool;Hoh, Donghee;Shin, Dong-Woo;Kim, Z-Hun;Hong, Seong-Joo;Lim, Sang-Min;Lee, Choul-Gyun
    • Journal of Marine Bioscience and Biotechnology
    • /
    • v.11 no.1
    • /
    • pp.23-28
    • /
    • 2019
  • For successful microalgal biodiesel production, the strain should be selected carefully. Fast growth rate and high fatty acid contents are desired traits for algal biodiesel production. In ocean cultivation of microalgae, seawater temperature slowly changes over seasons, and rotating algal strains in accordance with their optimal temperature could improve overall productivity. Additionally, use of indigenous strain is preferred to alleviate potential impacts on the environment. In this study, five strains of Tetraselmis sp. from nearshore of Youngheung Island, Incheon, Korea, were isolated during winter and characterized for their growth patterns and fatty acid compositions in the low temperatures ($5-15^{\circ}C$). The five strains showed various characteristics in optimal growth temperature, fatty acid contents, and compositions. Compared with a strain of Tetraselmis sp., isolated from Ganghwa island in a previous study, a rapid-growing strain with 237% higher biomass productivity and an oleaginous strain with twice higher fatty acid contents at $10^{\circ}C$ were isolated. The oleaginous Tetraselmis strain showed the highest fatty acid productivity among the strains, having 438% higher productivity than the previous strain. Using the new isolates in the seasons with low seawater temperature would improve microalgal fatty acid productivity in ocean cultivation.

Finite element simulation for steel tubular members strengthened with FRP under compression

  • El-Kholy, Ahmed M.;Mourad, Sherif A.;Shaheen, Ayman A.;Mohamed, Yomna A.
    • Structural Engineering and Mechanics
    • /
    • v.72 no.5
    • /
    • pp.569-583
    • /
    • 2019
  • Tubular steel sections are widespread all over the world because of their strength and aesthetic appearance. Tubular steel members may exhibit local buckling such as elephant foot or overall buckling under extreme compression load. Recently, external bonding of fiber reinforced polymers (FRP) sheets for strengthening these members has been explored through experimental research. This paper presents three-dimensional nonlinear finite element analysis (FEA) to investigate the structural behavior of strengthening tubular steel members with FRP against local and overall buckling phenomena. Out-of-roundness and out-of-straightness imperfections were introduced to the numerical models to simulate the elephant foot and overall buckling, respectively. The nonlinear analysis preferences such as the integration scheme of the shell elements, the algorithm for solution of nonlinear equations, the loading procedure, the bisection limits for the load increments, and the convergence criteria were set, appropriately enough, to successfully track the sophisticated buckling deformations. The agreement between the results of both the presented FEA and the experimental research was evident. The FEA results demonstrated the power of the presented rigorous FEA in monitoring the plastic strain distribution and the buckling phenomena (initiation and propagation). Consequently, the buckling process was interpreted for each mode (elephant foot and overall) into three sequential stages. Furthermore, the influence of FRP layers on the nonlinear analysis preferences and the results was presented.

Antibiosis of Pediocin-Producing Pediococcus sp. KCA1303-10 Against Listeria monocytogenes in Mixed Cultures

  • Ahn, Cheol;Kim, Chung-Hoi;Shin, Hyun-Kyung;Lee, Young-Min;Lee, Yeon-Sook;Ji, Geun-Eog
    • Journal of Microbiology and Biotechnology
    • /
    • v.13 no.3
    • /
    • pp.429-436
    • /
    • 2003
  • Pediocin K1 is a bacteriocin produced by Pediococcus sp. KCA 1303-10, isolated from traditionally fermented flatfish in Korea. Pediocin K1-dependent antibiosis and pediocin K1-independent antibiosis against Listeria monocyrogenes were investigated by comparing antibiosis potential of the ped+ wild-type strain of Pediococcus sp. KCA1303-10 with that of the ped- mutant strain in 3 different media at 3 different temperatures. In the synthetic MRS-APT medium, bacteriocin (pediocin K1)-dependent antibiosis (BDA) acted as the major driving force of overall antibiosis at the initial stage before the pH of the media was not sufficiently lowered, while bacteriocin-independent antibiosis (BIA) took over the major role at the late stage of antibiosis by killing otherwise resistant cells in the modium. The role of BDA increased as the temperature of the system decreased. The antibiosis potential of BDA among the overall antibiosis of Pediococcus against Listeria at $37^{\circ}C$ was calculated as 46%, and as 75% at $25^{\circ}C$. In the skim milk medium, antibiosis of Pediococcus against Listeria was weakened more than 4 log cycles compared to that of the synthetic medium; however, BDA worked as the main antibiosis force regardless of the culturing temperature in the skim milk medium. In the bean soup medium, BDA also worked as the major killing mechanism against Listeria, but BIA played as another suppressing mechanism against otherwise pediocin-resistant Listeria population. These results suggest that a large portion of the inhibitory action of the ped+Pediococcus sp. KCA1303-10 was attributable to the bacteriocin produced by the strain and that viable Pediococcus sp. KCA1303-10 was superior to the purified bacteriocin in suppressing the occurrence of the bacteriocin-resistant Listeria monocytogenes in food systems.

Effects of heat stress on growth performance, selected physiological and immunological parameters, caecal microflora, and meat quality in two broiler strains

  • Awad, Elmutaz Atta;Najaa, Muhamad;Zulaikha, Zainool Abidin;Zulkifli, Idrus;Soleimani, Abdoreza Farjam
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.33 no.5
    • /
    • pp.778-787
    • /
    • 2020
  • Objective: This study was conducted to investigate the effects of normal and heat stress environments on growth performance and, selected physiological and immunological parameters, caecal microflora and meat quality in Cobb 500 and Ross 308 broilers. Methods: One-hundred-and-twenty male broiler chicks from each strain (one-day-old) were randomly assigned in groups of 10 to 24 battery cages. Ambient temperature on day (d) 1 was set at 32℃ and gradually reduced to 23℃ on d 21. From d 22 to 35, equal numbers of birds from each strain were exposed to a temperature of either 23℃ throughout (normal) or 34℃ for 6 h (heat stress). Results: From d 1 to 21, strain had no effect (p>0.05) on feed intake (FI), body weight gain (BWG), or the feed conversion ratio (FCR). Except for creatine kinase, no strain×temperature interactions were observed for all the parameters measured. Regardless of strain, heat exposure significantly (p<0.05) reduced FI and BWG (d 22 to 35 and 1 to 35), immunoglobulin Y (IgY) and IgM, while increased FCR (d 22 to 35 and 1 to 35) and serum levels of glucose and acute phase proteins (APPs). Regardless of temperature, the Ross 308 birds had significantly (p<0.05) lower IgA and higher finisher and overall BWG compared to Cobb 500. Conclusion: The present study suggests that the detrimental effects of heat stress are consistent across commercial broiler strains because there were no significant strain×temperature interactions for growth performance, serum APPs and immunoglobulin responses, meat quality, and ceacal microflora population.