• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.61-61
• /
• 2020

This experiment was carried out using artificial bed soil and LED in the plastic film house(irradiation time: 07:00-17:00/day). Seedlings(n=63 per 3.3 m²) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity(40-160 µmol/m²/s). Average air temperature from April to September according to the light intensity test was 20.4℃-20.9℃. Average artificial bed soil temperature was 20.1℃-21.7℃. The test area where fluorescent lamp was irradiated tended to be somewhat lower than the LED irradiation area. The chemical properties of the test soil was as follows. pH levels was 6.6-6.7, EC levels 0.9-1.3 dS/m and OM levels 30.6-32.0%. The available P₂O₅ contents was 73.3-302.3 mg/kg. Exchangeable cations K and Ca contents were higher than the allowable ranges and mg content was high in the fluorescent lamp treatment. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PPFD(Photosynthetic Photon Flux Density) value, illuminance and solar irradiation. Fluorescent lamp treatment had high illuminance value, but PPFD and solar irradiation were lower than LED intensity 40 µmol/m²/s treatment. The photosynthetic rate increased(2.0-3.8 µmolCO²/m²/s) as the amount of light intensity increased, peaking at 120 µmol/m²/s, and then decreasing. The SPAD (chlorophyll content) value decreased as the amount of light intensity increased, and was the highest at 36.1 in fluorescent lamp treatment. Ginseng germination started on April 5 and took 14-17 days to germinate. The overall germination rate was 68.8-73.6%. The growth of aerial parts(plant height etc.) were generally excellent in the treatment of light intensity of 120-160 µmol/m²/s. The plant height was 41.9 cm, stem length was 24.1 cm, leaf length was 9.8 cm and stem diameter was 5.6 mm. The growth of underground part (root length etc.) was the best in the treatment with 120 µmol/m²/s of light intensity. Due to the root length was long(24.8 cm) and diameter of taproot was thick(18.7 mm), the fresh root weight was the heaviest at 24.8 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping-off caused by Rhizoctonia solani occurred 0.6-1.5% and incidence ratio of rusty root ginseng was 30.8-62.3%. It is believed that the reason for the high incidence of rusty root ginseng is that the amount of field moisture capacity of artificial bed soil is larger than the soil. Leaf discoloration rate was 13.7-32.3%.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3247-3252
• /
• 2007

Endwall losses contribute significantly to the overall losses in modern turbomachinery, especially when aerodynamic airfoil load and pressure ratio are increased. Hence, reducing the extend and intensity of the secondary flow structures helps to enhance overall efficiency. From the large range of viable approaches, a promising combination positioning and height of endwall contouring was chosen. The objective of this study is to document the three-dimensional flow in a turbine cascade in terms of streamwise vorticity, total pressure loss distribution and static pressure distribution on the endwall and blade surface and to propose an appropriate positioning and height of the endwall contouring which show best secondary, overall loss reduction among the simulated endwall. The flow through the gas turbine were numerically analyzed using three dimensional Navier-Stroke equations with a commercial CFD code ANSYS CFX-10. The result shows that the overall loss is reduced near the flat endwall rather than contoured endwall, and the case of contoured endwall installed at 30% from leading edge with height of 25% for span showed best performance.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.541-548
• /
• 2014

This study aims to examine how mobile instant messenger (MIM) usage pattern and MIM intensity influence MIM users' social capital. Total 253 MIM users in their 20's and 30's participated an online survey. Results showed that MIM frequency and network size affected bonding social capital. Meanwhile, MIM intensity was the only variable that influenced users' bridging social capital. Overall, the strength of strong ties in mobile media use was confirmed again. It was also confirmed that measuring the qualitative level of emotional attachment to the MIM (MIM intensity) was more important than gauging mere usage pattern when evaluating social capital enhancement through mobile media use.

• Preventive Nutrition and Food Science
• /
• v.5 no.1
• /
• pp.15-19
• /
• 2000

This study was conducted to determine sensory and chemical traits of reduced-fat frankfurters made with lean lamb or lean lamb/pork (50%/50%), fat from three different sources(pork fat, lamb fat or high-oleic sunflower oil) and added water products designated as L-P-15, LP-L-15, LP-So-15 and LP-P-15, according to lean meat type, source of added fat and target fat content and to compare such products with a similar reduced-fat product made with lean beef/pork (50%/50%) with pork fat(product designated as BP-P-15) and high-fat products made with lean beef/pork (50%/50%) or lamb/pork (50%/50%) with pork fat (BP-P-30 and LP-P-30). Actual fat contents of reduced-fat and high-fat products formulated for 15% and 30% fat were 17~18% and 28~31%, respectively, after processing. Processing yields were lower for all reduced-fat products than for the high-fat products. Trained sensory panelists rated LP-P-15 less intense in lamb flavor as compared to LP-L-15 and LP-So-15. Off-flavor intensity was positively correlated with lamb-flavor intensity (r=0.80), whereas frankfurter-flavor intensity was negatively correlated with lamb-flavor intensity (-0.88) and off-flavor intensity (r=-0.90). According to consumer panelists, LP-P-15 was as desirable in flavor as BP-P-15 or the two high-fat products (BP-P-30 and LP-P-30), while LP-So-15 and LP-L-15 were not. LP-P-15 and BP-P-15 were not notably different from their high-fat counterparts in juiciness and texture desirability and overall palatability. Regardless of fat content, meat type and fat source, there was little lipid oxidation when vacuum-packaged products were refrigerated for 12 weeks.

• Journal of the East Asian Society of Dietary Life
• /
• v.27 no.4
• /
• pp.365-377
• /
• 2017

The objective of this study was to investigate the sensory quality characteristics of coffee under various processing and roasting conditions of green beans. Colombia green bean samples were obtained from three processing methods: natural, pulped-natural, and washed methods. The green beans were roasted differently according to Agtron number: light (Agrton #65), medium (Agtron #55), and dark (Agtron #45). Moisture content, density, color value, pH, and total dissolved solid contents (TDS) were measured, and quantitative descriptive analysis (QDA) with 23 sensory attributes was performed for nine coffee samples. Hunter L values were significantly elevated with the degree of processing but reduced with roasting intensity. The pH values of the nine coffee samples were 5.6~6.2 and significantly increased with intensity of roasting. TDS decreased with an increase in processing and increased with roasting intensity. QDA results show that smoky aroma and nutty and chocolate flavor significantly increased while fruit and floral aroma decreased with intensity of processing. The attributes of brownness, oily surface, smoky aroma, bitter and burnt flavor, and greasy and heavy mouthfeel significantly increased while fruity and floral aroma, black tea, sour and umami flavor, pureness, and softness decreased as roasting intensity increased. Principle component analysis showed the overall significant relationships between 23 sensory attributes and nine coffee samples under different processing and roasting conditions.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.1-2
• /
• 2000

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the onventional rotating barrel, vibrational barrel(vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components. The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed thatbthe average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value. Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components. However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. 2H20 + e $\rightarrow$M/TEX> 20H + H2.. Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure there by resulting to bad plating condition.

• Korean Journal of Psychosomatic Medicine
• /
• v.29 no.2
• /
• pp.199-206
• /
• 2021

Objectives : This study aimed to compare the characteristics of suicide attempts among Korean patients with mixed and non-mixed depression. Methods : Patients who visited the emergency room due to a suicide attempt and participated in the Korean Cohort for the Model Predicting a Suicide and Suicide-related Behavior study were included. Using the Montgomery-Asberg Depression Rating Scale (MADRS) and Young Mania Rating Scale (YMRS), 111 patients were classified into the mixed depression (n=46) and non-mixed depression groups (n=65). The Koukopoulos Mixed Depression Rating Scale (KMDRS) score was calculated using the MADRS and YMRS scores. Suicide attempt characteristics were evaluated using the Columbia Suicidal Severity Rating Scale (C-SSRS) and Suicide Intent Scale (SIS). Results : In the mixed depression group, the reason item among the ideation intensity score of the C-SSRS was higher, and the deterrent item score was lower. Scores on the timing and suicide note items of the SIS were higher, and scores for overt communication items were lower in the mixed depression group. The KMDRS score was positively correlated with the C-SSRS ideation intensity and total SIS score. After adjusting for additional variables, the KMDRS scores had a significant effect on the C-SSRS ideation intensity and total SIS scores. Conclusions : The mixed depression group showed a difference in the intensity of suicidal ideation and suicidal intention compared to those in the non-mixed depression group. The overall suicidal ideation intensity and suicidal intention increased according to the degree of mixed depression.

• Structural Engineering and Mechanics
• /
• v.81 no.2
• /
• pp.219-230
• /
• 2022

Due to the large number of railway bridges along China's high-speed railway (HSR) lines, which cover a wide area with many lines crossing the seismic zone, the possibility of a HSR train running over a bridge when an earthquake occurs is relatively high. Since the safety performance of the train will be threatened, it is necessary to study the safety of trains running over HSR bridges during earthquakes. However, ground motion (GM) is highly random and selecting the appropriate ground-motion intensity measures (IMs) for train running safety analysis is not trivial. To deal this problem, a model of a coupled train-bridge system under seismic excitation was established and 104 GM samples were selected to evaluate the correlation between 16 different IMs and train running safety over HSR bridges during earthquakes. The results show that spectral velocity (SvT₁) and displacement (SdT₁) at the fundamental period of the structure have good correlation with train running safety for medium-and long-period HSR bridges, and velocity spectrum intensity (VSI) and Housner intensity (HI) have good correlation for a wide range of structural periods. Overall, VSI and HI are the optimal IMs for safety analysis of trains running over HSR bridges during earthquakes. Finally, based on VSI and HI, the IM thresholds of an HSR bridge at different speed were analyzed.

• Speech Sciences
• /
• v.14 no.1
• /
• pp.73-89
• /
• 2007

This study explored the perception of transplanted English prosody by thirty American and Korean, male and female listeners. The English utterances of various sentence types produced by Korean and American male speakers were employed to transplant the American prosody contours to Korean English utterances. Then, the thirty subjects were instructed to rate the transplanted prosodic components. Results showed that the interactions between the three factors (e.g., rater groups & transplantation types; transplantation types & sentence types; rater groups & transplantation types & sentence types) turned out to be meaningful. Both Americans and Koreans perceived the effectiveness of the combined effect of transplanted duration and pitch or duration and pitch and intensity. However, when perceiving individual prosodic components, Americans and Koreans showed different perceptual ratings. As for the overall prosody change, Americans perceived the change of intensity in a significant way but Koreans did not because intensity is not a crucial semantic factor in Korean. Americans rated the transplantation of duration alone as ineffective while Koreans rated otherwise. This was explained by the difference between English and Korean. The difference of perspective was also significant with different sentence types, especially with the three sentence types that had speech rates slower than other sentence types. A slower speech rate intensified the mismatch between the transplanted duration and the original pitch causing a negative impression on American listeners whereas this did not affect Korean listeners. Pedagogical implications of the findings are discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.962-965
• /
• 2005

A high intensity progressive wave tube is installed at Korea Aerospace Research Institute (KARI) for acoustic environmental tests. The test facility has 700 mm x 800 mm cross-sectional area, and provides acoustic environment of 165 dB over the frequency range of $25Hz{\sim}10,000Hz$. The facility consists of a 6 m long acoustic wave tube, acoustic power generation systems, gases nitrogen supply systems, and acoustic control systems. This paper describes how the basic parameters of the facility and power generation systems are controlled to meet the requirement of the test. The shape and length of the tube has been designed by using the size of test objects and the wave propagation characteristics of the tube. The capacity of acoustic power generation systems is determined by the energy conversion of acoustic wave and the efficiency of acoustic modulators. Moreover, the paper introduces test run results of the tube. Overall of 163dB has been generated by using the test facility.