• 제목/요약/키워드: over-oxidation

검색결과 763건 처리시간 0.027초

304 및 430 스테인레스 강판의 산화 및 중성염 전해산세 거동 (Oxidation and Neutral Electrolytic Pickling Behavior of 304 and 430 Stainless Steels)

  • 김태수;박용택
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
    • /
    • pp.285-293
    • /
    • 2004
  • Oxidation behavior of 304 and 430 stainless steel were studied using thin film X-ray analysis and glow discharge spectrum analysis (here-after GDS). The oxidation layer of 304 stainless steel was composed of $Cr_2O_3\;and\;FeCrO_4$ and its thickness was about $1.5{\mu}m$ after $1\~5$ minutes of annealing at $1120^{\circ}C$ open air. However, the oxidation layer of 430 stainless steels was mainly composed of $Cr_2O_3$ and its typical thickness was 0.5um after $1\~5$ minutes of annealing at $1000^{\circ}C$ open air. Electro-chemical analysis revealed that the descaling of oxidation layer could be activated by Fe, Cr dissolution from the matrix behind the oxidation layer at the current density of $5\~10ASD$ and by Fe, Cr-oxide dissolution from the oxidation layer at the current density over than 10ASD. Electrolytic stripping of 430 and 304 revealed the intial incubation period of descaling by oxygen evolving at low current density range such as $5\~10ASD$. However the dissolution of oxide layer was occurred when applying the anodic current of $10\~20ASD$ on 430 and 304 stainless steels. It was suggested that the electrolytic pickling of high Cr bearing stainless steel such as 430 and 304 seemed to be the more effective in the high current density range such as $10\~20ASD$ than the low current density range such as $5\~10ASD$.

  • PDF

TPR/TPO 실험기법을 이용한 전이금속산화물의 산화-환원 특성 연구 (Redox Property of Transition Metal Oxides in Catalytic Oxidation)

  • 김영호;이호인
    • 공업화학
    • /
    • 제10권8호
    • /
    • pp.1161-1168
    • /
    • 1999
  • 3주기 전이금속(Cr~Zn)의 산화물 및 V, Mo, W의 산화물에 대하여 temperature-programmed reduction/trmperature-programmed oxidation(TPR/TPO) 실험을 통하여 그 산화-환원 특성을 조사하였다. TPO 곡선의 산화피크는 TPR 곡선의 환원피크와 비슷하거나 약간 낮은 온도에서 나타났으며, 환원피크에 비하여 온도 폭이 넓었다. 3주기 전이금속한화물의 산화 및 환원 과정의 활성화에너지는 33~149 kJ/mol 범위에 있는 반면, V, Mo, W 산화물에서는 더 컸다. 금속산화물의 산화 및 환원 과정의 활성화에너지 변화는 금속-산소 결합세기에 비례하였다. 환원(TPR) 및 산화(TPO) 과정에 대한 활성화에너지 차이(${\Delta}E_a$)가 작을수록 o-자일렌 산화반응에서 금속산화물 촉매의 활성화에너지도 작았다. 금속한화물 촉매에서 o-자일렌 산화반응은 금속산화물 표면의 산화-환원 과정을 반복하는 Mars-van Krevelen 반응 메카니즘으로 설명될 수 있음을 확인하였다.

  • PDF

Microstructural changes of polyacrylonitrile-based carbon fibers (T300 and T700) due to isothermal oxidation (1): focusing on morphological changes using scanning electron microscopy

  • Oh, Seong-Moon;Lee, Sang-Min;Kang, Dong-Su;Roh, Jae-Seung
    • Carbon letters
    • /
    • 제18권
    • /
    • pp.18-23
    • /
    • 2016
  • Polyacrylonitrile (PAN)-based carbon fibers have high specific strength, elastic modulus, thermal resistance, and thermal conductivity. Due to these properties, they have been increasingly widely used in various spheres including leisure, aviation, aerospace, military, and energy applications. However, if exposed to air at high temperatures, they are oxidized, thus weakening the properties of carbon fibers and carbon composite materials. As such, it is important to understand the oxidation reactions of carbon fibers, which are often used as a reinforcement for composite materials. PAN-based carbon fibers T300 and T700 were isothermally oxidized in air, and microstructural changes caused by oxidation reactions were examined. The results showed a decrease in the rate of oxidation with increasing burn-off for both T300 and T700 fibers. The rate of oxidation of T300 fibers was two times faster than that of T700 fibers. The diameter of T700 fibers decreased linearly with increasing burn-off. The diameter of T300 also decreased with increasing burn-off but at slower rates over time. Cross-sectional observations after oxidation reactions revealed hollow cores in the longitudinal direction for both T300 and T700 fibers. The formation of hollow cores after oxidation can be traced to differences in the fabrication process such as the starting material and final heat treatment temperature.

실리카 피착이 철분말의 입자형태 및 자기특성에 미치는 영향(제2보) (Effect of Silica Coating on Particle Shape and Magnetic Properties of Iron Powder (II))

  • 오재희;김종식;류병환
    • 한국세라믹학회지
    • /
    • 제23권2호
    • /
    • pp.31-37
    • /
    • 1986
  • The effect of dehydration temperature on the reduction process of silica-coated hematite was invest-igated The particle shape and magnetic properties of the products reduced from hematite at various conditions and the oxidation resistance of silica-coated iron powder were examined. It was revealed that single phase iron powder obtained over 45$0^{\circ}C$ had good magnetic properties. The iron powder manufactured between 45$0^{\circ}C$ and 50$0^{\circ}C$ displayed the maximum coercive force as a result of maintaining its acicular shaped. However the coercive force of iron powder reduced over 50$0^{\circ}C$ was decreased. The oxidation resistance of silica-coated iron powder in air was very good up to 11$0^{\circ}C$ and for 12 days.

  • PDF

마이크로파를 이용한 SHS 방법에 의한 분말의 산화-환원반응 (Microwave Induced Reduction/Oxidation Reaction by SHS Technique)

  • 김석범
    • 한국결정학회지
    • /
    • 제9권1호
    • /
    • pp.44-47
    • /
    • 1998
  • 가정용 2.45GHz 마이크로파 오븐을 사용하여 A1 금속분말과 SiO2 분말간에 SHS방법에 의하여 산화/환원 반응을 통한 Al2O3 분말과 Si분말간의 복합체를 얻을 수 있었다. 분말간의 반응을 일으키기 위한 온도까지 승온시키기 위하여는 SiC 분말을 susceptor로 이용한 마이크로파 복합가열(Microwave Hybrid Heating)방법을 사용하여 분당 100℃의 승온 속도로 가열하였으며 반응은 850℃ 근처에서 일어났으며 가열 속도는 반응이 시작되면서 분당 200℃ 이상의 온도상승이 일어나면서 원하는 반응을 얻을 수 있었다.

  • PDF

Pseudotsuga menziesii의 Monoterpenoid가 질화작용에 미치는 효과 (The Effects of Pseudotsuga menziesii Monoterpenoids on Nitrification)

  • 김종희
    • The Korean Journal of Ecology
    • /
    • 제17권3호
    • /
    • pp.251-260
    • /
    • 1994
  • Pseudotsuga menziesii 임상에서 질화작용의 억제제로서의 monoterpenoids의 역할을 연구하고자 토양에서의 질화작용과 식물체잎, 낙엽 및 무기토양에서의 monoterpenoids의 함량을 분석하였다. Pseudotsuga menziesii잎이나 임상에서 분석된 monoterpenoids는 대략 16종 이었으며, 그 중 ${\alpha}$-pinene, ${\beta}$-pinene, ${\gamma}$-terpinene 그리고 terpenolene이 대표적인 것들이었다. 임상에 있는 monoterpenoids의 양은 무기토양층에 비해 항상 많았으며, 계절적 변이가 있었으나 토양층은 항상 일정하였다. 질화작용 과정 중 ammonium oxidation 과정은 낙엽층이 보다 더 많은 저해를 받았으나, nitrite oxidation 과정은 두층별간 별 차이가 없었다. 또한 4가지 monoterpenoids(${\alpha}$-pinene, ${\beta}$-pinene, ${\gamma}$-terpinene, terpenolene)를 인위적으로 첨가한 토양에서의 질화작용에 역시 am-monium oxidation 과정은 심히 저해를 받는 반면 nitrite oxidation 과정은 저해를 받지 않는 것으로 나타났다. 이 같은 모든 결과들은 Pseudotsuga menziesii 임상에 있는 monoterpenoids의 영향으로 질화작용에 관여하는 미생물, 특히 Nitrosomonas europaes의 증식이 억제되어 am-monium oxidation 과정이 저해되었음을 시사한다.

  • PDF

갯벌의 무척추 동물 서식굴 내 메탄산화 평가 (Assessment of CH4 oxidation in macroinvertebrate burrows of tidal flats)

  • 강정원;권개경;우한준;최재웅
    • 한국습지학회지
    • /
    • 제21권2호
    • /
    • pp.95-101
    • /
    • 2019
  • 식생이 없는 갯벌에서 메탄($CH_4$) 플럭스는 배출과 흡수 양상을 보인다. 특히 메탄영양세균 개체군은 메탄 흡수에 상당한 영향을 준다. 본 예비연구는 거대 무척추 동물의 서식활동(bioturbation) 영향을 이해하기 위해 원형 밀폐 챔버 방법을 사용하여 갯벌에서 메탄 플럭스를 조사하였다. 챔버는 십각목(decapoda)의 mud shrimp(Laomedia astacina)와 crab(Macrophthalmus japonicas) 서식굴에 약 2시간 동안 배치되었고, 메탄과 이산화탄소($CO_2$) 농도는 밀폐된 $CH_4/CO_2$ 확산 플럭스 관측 장비를 사용하여 지속적으로 모니터링 되었다. 서식굴 길이가 긴 Laomedia astacina 위치에서는 깊은 퇴적층의 메탄 방출 때문에 상대적인 높은 수준의 메탄 발생을 일으킨 것으로 나타났다. 또한, 서식굴 퇴적물에서 발견되는 메탄영양세균 개체군은 메탄 산화(oxidation) 잠재력을 나타냈다. 특히 서식굴 내 아질산염 관련 혐기성 산화(anaerobic oxidation of methane, AOM)가 확인되었다. 이러한 메탄 산화 발생은 챔버 실험 동안 이산화탄소의 탄소 안정동위원소비(${\delta}^{13}C$) 감소로 뒷받침되었다. 따라서 갯벌에서 무척추 동물의 서식활동은 대기 중 메탄 농도를 제어할 수 있는 중요한 생태계 환경으로 보인다.