• Journal of Biosystems Engineering
• /
• v.12 no.1
• /
• pp.39-44
• /
• 1987

Measurement methods of moisture content were compared with 7 dried vegetables (red pepper, onion, green onion, garlic, ginger, carrot and radish). The moisture contents of dried vegetables having different moisture contents were determined by atmospheric oven drying, infrared balance, vacuum oven and Karl Fisher methods. Vacuum oven and Karl Fisher methods gave the relatively agreed results and considered to give the accurate moisture content. Atmospheric oven drying and infrared balance methods resulted in higher moisture content than methods mentioned above, because of the thermal decomposition of solid. Calibration of the moisture data of atmospheric oven drying method into the vacuum oven data was undertaken. The thermodecomposable solid fraction was high in onion, radish, green onion and carrot, and was in the range of 8.0-11.7% of the total solid in these products.

• The Journal of Engineering Geology
• /
• v.32 no.3
• /
• pp.401-410
• /
• 2022

This work reports an oven drying test performed on weathered granite soil from Yecheon, Korea, in order to find an effective method for measuring the weight of pure soil particles. After samples were oven dried, weights measured following desiccation using the method specified by the Korean Industrial Standard (KS F) were compared with weights measured without prior desiccation. Soil samples exposed to air for 45 min after oven drying absorbed moisture from the air and gradually increased in weight. When a desiccator was used, results measured 30 s after exposure to air indicated weight increases of 0.103-0.735% (depending on the particle size of the soil) relative to equivalent samples measured without desiccation. Using a desiccator after oven drying leads to overestimation of the pure soil weight. Therefore, measuring the weight of a soil sample immediately after oven drying without using a desiccator can reduce the error of weight measurement.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.11
• /
• pp.1615-1622
• /
• 2014

An accurate assessment of moisture content in feed ingredients is important because moisture influences the nutritional evaluation of feedstuffs. The objective of this study was to evaluate various methods for moisture content determination. In Exp. 1, the weight loss on drying (LOD) of corn, soybean meal (SBM), distillers dried grains with solubles (DDGS), whey permeate, whey powder, spray-dried porcine plasma (SDPP), fish meal, and a mixed diet of these 7 ingredients were measured by oven drying at $135^{\circ}C$ for 2 h. Additionally, the samples were dried at $105^{\circ}C$ for 3, 6, 9, 12, or 15 h. The LOD contents of the DDGS, whey permeate, and whey powder measured by drying at $135^{\circ}C$ for 2 h were greater than the values measured by drying at $105^{\circ}C$ for 3 h (p<0.05). All samples except SDPP (p = 0.70) dried at $105^{\circ}C$ for 6, 9, 12, or 15 h caused more LOD compared with the samples dried for at $105^{\circ}C$ for 3 h (p<0.05). The LOD contents of the individual ingredients were additive when dried at $105^{\circ}C$ regardless of drying time. In Exp. 2, moisture contents of corn, SBM, wheat, whey permeate, whey powder, lactose, and 2 sources of DDGS (DDGS1 and DDGS2) were measured by the Karl Fischer method, oven drying at $135^{\circ}C$ for 2 h, and oven drying at $125^{\circ}C$, $115^{\circ}C$, $105^{\circ}C$, or $95^{\circ}C$ for increasing drying time from 1 to 24 h. Drying samples at $135^{\circ}C$ for 2 h resulted in higher moisture content in whey permeate (7.5% vs 3.0%), whey powder (7.7% vs 3.8%), DDGS1 (11.4% vs 7.5%), and DDGS2 (13.1% vs 8.8%) compared with the Karl Fischer method (p<0.05). Whey permeate and whey powder were considerably darkened as the drying time increased. In conclusion, drying samples at $135^{\circ}C$ for 2 h is not appropriate for determining the moisture content in whey permeate, whey powder, or DDGS as well as the mixed diet containing these ingredients. The oven-drying method at $105^{\circ}C$ for 5 to 6 h appears to be appropriate for whey permeate and whey powder, and at $105^{\circ}C$ for 2 to 3 h for DDGS.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.92-105
• /
• 2018

The present study was carried out to find a suitable drying method for measuring non-evaporable water contents of various hydraulic inorganic materials. In Part 1 of the paper, the case Ordinary Portland cement is discussed. Various drying methods including vacuum and oven drying, and an ignition, were used for the OPC paste and mortar having different w/c. The sole vacuum drying under room temperature led a fluctuation on measurement of hydration degree, while the sole oven drying also yielded unwanted hydration promotion at the early age. A combination of the vacuum and oven drying was considered as a suitable drying method for the OPC case.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.251-254
• /
• 2006

This study was conducted to identify changes of chemical components affected by different drying method and temperature conditions in leaves and stems of peony plant. Drying methods were the dried air heated $(50^{\circ}C)$, far-red ray $(50^{\circ}C)$, room temperature and oven dry $(50^{\circ}C)$. Drying temperature were 40, 50, 60, 70 and $80^{\circ}C$ on far-red ray dryer. Among the drying methods, the contents of components were the highest in far-red drying and normal temperature drying as compared with air heated drying and oven drying. Among the drying temperature conditions, the contents of components were the highest in drying temperature at $40^{\circ}C$ and decreased in high temperature of $70^{\circ}C\;and\;80^{\circ}C$.

• Journal of Animal Environmental Science
• /
• v.8 no.3
• /
• pp.177-182
• /
• 2002

Drying process is very important for commercialization of velvet antlers. So far, artificial drying has mostly depended on experience of farmers resulting in low efficiency of drying, deterioration during drying, and contamination by dust and bacteria. Various drying techniques for high-quality production have currently been commercialized in some developed countries, and one of them is a drying technique using microwave. In this study, application of the technique using an electronic (microwave) oven for drying of velvet antler was investigated. The results of this study are as follows. 1. It was found that the drying period was significantly affected by cornification of velvet antlers. Accordingly, it can be assumed that the velvet antlers should partly be sliced to save drying period and required drying energy. 2. It was also found that the drying speed was changeable according to tempering period and even with same drying period. The tempering period should be controlled according to processing rate. 3. The results indicated that a repeated drying of 2-min drying and 3-min tempering is the most effective when a microwave oven was used. 4. The results also showed that the drying technique using microwave of electronic oven can be effectively used for drying of velvet antlers. 5. Only drying and tempering periods were examined in this study, however, ingredient change of deer antler after drying is necessary to be investigated in the future.

• Journal of the Korean earth science society
• /
• v.38 no.2
• /
• pp.150-160
• /
• 2017

In order to determine the porosity of rock, the 'standard test method for porosity and density of rock' proposed by the Korean Society for Rock Mechanics is commonly used. However, the standard test method, which uses a drying oven, takes 8 to 24 hours to complete the test in taking samples out of the oven every four hours and measuring the weight of the specimen. To complement these disadvantages, we devised a method for measuring rock porosity by using a microwave oven. The devised method reduced the cause of errors and the inconvenience occurred in the process of weighing samples by constructing a weight monitoring system, which monitors the drying process. A suitable heating/pause time was set up to maintain the temperature of sample below $105{\pm}3^{\circ}C$ in drying process, and an alarm system was implemented in order to stop drying process when the weight change of the rock sample is within 0.1% of the initial weight. The porosity was determined from the dry weight of the sample, which was obtained by the curve fitting of weight monitoring data. Then, the porosities obtained by using the microwave oven were compared with those obtained by the standard test method. Test results using sandstone samples showed that the porosities obtained by a microwave oven was similar to those obtained by the standard method and the porosity difference between two methods was as large as 0.4%. In addition, repeated porosity measurement using the same specimen showed that the standard deviation of the porosity, which reflects the precision of the measurement was as good as 0.23%. Therefore, a microwave oven porosity measurement system can give the porosity of rock samples with high reliability.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.106-117
• /
• 2018

The present study was carried out to find a suitable drying method for the determination of non-evaporable water in hydraulic inorganic materials. In Part 1 of the paper, the case ordinary Portland cement was discussed and, in this Part 2, the case of alkali active slag (AAS) was investigated. Various drying methods including vacuum and oven drying, and an ignition, were used for the AAS system having different w/b, types and amounts of alkali activators. It was found that a combination of the vacuum and oven drying was a suitable drying method for the AAS case. Although a part of the crystallized water in hydration products was decomposed, but the free and adsorbed water could be completely evaporated and the deviation of the results was small.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.2
• /
• pp.143-152
• /
• 2023

In this research, the microwave oven drying method was investigated as a potential accurate testing approach for determining the water content of fresh concrete. To do so, water content estimation formulas employed in three prominent oven drying test methods were selected, and the calculation principles for each equation, along with potential error factors arising during the actual testing process, were considered. Moreover, a concrete test was conducted to validate the possible error factors. Consequently, it was confirmed that estimation errors in the water content of fresh concrete can occur due to sample deviations arising during the wet screening process for creating mortar specimens or deviations in the coarse aggregate sampling quantity during the sample collection process.

• Journal of the Korea Furniture Society
• /
• v.11 no.1
• /
• pp.69-74
• /
• 2000

Pinus $rigida{\times}taeda$ and Liriodendron tulipifira have been planted in this country for about 20 years. They are known as a relatively 13st-grown and useful species. The physical properties such as green moisture contents, specific gravities and dimensional shrinkages were examined with natively grown timbers. The kiln-dry schedules were developed with 30m thick boards by using an oven-fast-drying method. In both species the green MC's of sapwoods were higher than those of heartwoods, but their discrepancies were small. The green specific gravities of Pinus $rigida{\times}taeda$ and Liriodendron tulipifera were 0.48 and 0.41~O.42, respectively. The developed kiln-dry schedules were proven to minimize drying defects for the hoards of 30mm thickness and various width.