• 제목/요약/키워드: outside-to-inside changing process

검색결과 25건 처리시간 0.028초

중국 역대 북경팔경(北京八景)의 경관인식 변화에 대한 고찰 (A Study on the Changes of Landscape Perception for 'Bejing-Palgyeong(北京八景)' in China)

  • 권지영;김성균
    • 한국전통조경학회지
    • /
    • 제38권2호
    • /
    • pp.1-13
    • /
    • 2020
  • 본 연구는 북경팔경과 관련된 시문과 서화를 비롯하여 고지도·고문헌 등을 분석하여 북경팔경의 시대별 변천과정과 경관인식 변화, 북경팔경의 물리적 경관요소 및 구조분석과 국가경영과의 관계, 마지막으로 북경팔경의 장소화과정을 고찰하였다. 북경팔경의 경점은 도성 밖과 안으로 각각 네 곳씩 분포하고 있으며, 도성 밖은 모두 황제의 휴식처이자 북경의 산수경관의 중심인 서산 지역에 집중되었고, 도성 안의 경점은 궁궐의 황제원림에 두 곳, 성곽 주변의 마을 두 곳에 분포하고 있다. 즉 북경팔경은 초기 조성될 때부터 황실, 황제, 황궁과 밀접하게 관련된 장소로 선정하였으며, 금 이후 원·명·청대를 거치면서 황제를 비롯한 수많은 학자들이 국가경영에 활용함으로써 점점 도성팔경으로서 성격이 짙어졌다. 도성 내 두 곳은 신선과 황제를 동격화하여 칭송하였으며, 도성 밖 두 곳은 도성주변의 마을 경관의 모습을 담고 있으면서 통치를 받는 백성들의 편안한 삶을 묘사하고 있다. 결국 팔경의 대부분 조망지역은 황궁과 황제와 관련이 있음을 알 수 있다. 북경팔경의 물리적 경관을 요소별로 살펴보면, 수도방비·인재선발·농사에 대한 내용을 담은 국가경영과 황제 칭송, 북경 민가의 모습을 담고 있다. 건륭제는 중국의 팔경(경관) 문화를 소상팔경(북송)→서호팔경(남송원말)→연경팔경(금대)→북경팔경(명대)→건륭제의 연산팔경(청대)으로 역사적 맥락을 계승하려고 하였을 뿐만 아니라 비석과 원림 조성을 통해 북경팔경의 장소화하는 과정을 확인하였다.

해외 해수담수화플랜트 수주현황 분석 및 연구 (An analyze of oversea desalination plant order result)

  • 손진식;양정석;이선재;장진구;임재한;김동하
    • 상하수도학회지
    • /
    • 제22권3호
    • /
    • pp.337-342
    • /
    • 2008
  • A population growth and industry advances are increasing the demand for water while improving the quality of life. By turning seawater into freshwater it is an alternative for the water shortage problem. The study analyzes the orders and makes suggestions on the outlook of an enterprise that can supply desalination plants both inside and outside the country. It compares the production capacity of enterprises in the desalination industry who deal with the thermal and RO methods. We compare 7 enterprises in the thermal method which includes Doosan Heavy Industries, and the top 10 enterprises in the RO method which includes General Electric Corp. Now that the markets in the Middle East have opened and markets in other regions are gradually growing, demand for water will grow especially in developing countries that are in the process of industrialization. Also, the market share of thermal method desalination has been falling, gradually, because too much energy is spent during the process. On the other hand, the market share of the RO method will rise from 37% in 2005 to 57% in 2015. Recently, the desalination market shows that changing from thermal method to RO method is the trend in the Middle East. Growth and demand in other regions are growing at the same pace as the Middle East. Due to this trend, if the RO system, which is highly effective and uses less energy, were to be continuously developed it would be possible to supply water using sea water and would be a viable alternative water resource.

산업부산물을 이용하여 제조된 시멘트 클링커의 수용성 6가 크롬 용출 특성 (Leaching Properties of Water-Soluble Hexavalent Chromium in Manufacturing Cement Clinker Using Industrial By-Products)

  • 이정희;추용식;송훈;이종규
    • 한국재료학회지
    • /
    • 제20권4호
    • /
    • pp.181-186
    • /
    • 2010
  • Since it was developed by Joseph Aspdin, cement has been a common construction materials up to the present time. However, there are trace constituents in cement clinker. One of the trace constituents included in cement clinker, chromium, has become prominent and highly noticed lately as a social issue both inside and outside of this country because it affects the human body negatively. The aim of the present study was to investigate the concentration of water-soluble hexavalent chromium in cement clinker by using industrial by-products. For that reason, raw materials were prepared to add different $SiO_2$, $Al_2O_3$, and $Fe_2O_3$ sources. After the raw materials such as the limestone, the sand and the clay, iron ore was pulverized and mixed, and the raw meal was burnt at about $1450^{\circ}C$ in a furnace with an oxidizing atmosphere. The part in the raw materials of the clinker was substituted with slag, sludge, etc. and this was used to manufacturing cement clinker. To investigate the water-soluble hexavalent chromium content in clinker, raw meal was prepared by changing the modulus, the type, and the content of clinker materials and tested concentrations of hexavalent chromium in the clinkers. To determine $Cr^{+6}$ formation of the clinker, tests were done with raw meals adding chromium by using different industrial by-products. Consequently because the chromium was to be included in the raw materials of the clinker, production of Portland cement clinker was included with the chromium. Also, the chromium was converted into hexavalent chromium in the burning process.

침지형 황 탈질 모듈을 이용한 고속의 질소제거 (High-Rate Nitrogen Removal using a Submerged Module of Sulfur-Utilizing Denitrification)

  • 문진영;황용우;가미선
    • 상하수도학회지
    • /
    • 제21권4호
    • /
    • pp.429-437
    • /
    • 2007
  • This study aims to develop a sulfur-using denitrification process which is possible a renovation to advanced treatment plant submerging a simple module in activated sludge aeration tank. At first, the impact factor of sulfur-using denitrification was appreciated by the batch test. Secondly, reflecting a dissolved oxygen effect of sulfur-using denitrification that was confirmed by the batch test, in a continuous nitrification/sulfur-using denitrification, high-rate nitrogen removal reaction was induced at optimum condition controlling DO concentration according to phases. Also, inside and outside of sulfur-using denitrification module was covered with microfilter and the module was considered as an alternative of clarifier. Result of batch test for sulfur-using denitrification, $NO_2{^-}N$ was lower for consumption of alkalinity and sulfur than that of $NO_3{^-}-N$. These results revealed the accordance of theoretical prediction. In continuous nitrification/sulfur-using denitrification experiment, actual wastewater was used as a influent, and influent nitrogen loading rates were increased 0.04, 0.07, 0.11, $0.14kg\;N/m^3-day$ by changing hydraulic retention times. At this time, nitrogen loading rates of packed sulfur were increased 0.23, 0.46, 0.69, $0.93kg\;N/m^3-day$. As a result, nitrification efficiency was about 100% and denitrification efficiency was 93, 81, 79, 72%. Accordingly, nitrogen removal was a high-rate. Also the module of sulfur-using denitrification covered with microfilter did not make a fouling phenomena according to increased flux. And the module was achieved effluent suspended solids of below 10 mg/L without a clarifier. In conclusion, it is possible a renovation to advanced treatment plant submerging a simple module packed sulfur in activated sludge aeration tank of traditional facilities. And the plant used the module packed sulfur is expected as a effective facilities of high-rate and the smallest.

도자 덧살 확장 기법을 이용한 떡살 문양 단지 개발에 관한 연구 (A Study on the Development of Rice Cake Pattern Complex Using Ceramic Weld Extension Technique)

  • 김승만
    • 한국콘텐츠학회논문지
    • /
    • 제20권12호
    • /
    • pp.671-680
    • /
    • 2020
  • 오늘날 새로운 콘텐츠의 공예품을 개발하는 단계에서 트렌드(Trend)를 반영하지 않으면 마케팅에 성공할 수 없다. 트렌드는 일시적으로 왔다가 사라지는 소비자들의 니즈(needs)를 이끄는 원동력이기 때문이다. 현재의 시장은 끊임없이 변화하며 새로운 라이프 스타일의 독특한 추세를 원하고 있다. 이러한 잠재적 욕구의 경향을 떡살문양과 도자단지를 이용하여 부가 가치가 높은 인테리어 화병을 개발하는 것이 목적이다. 제작 방법은 첫 번째 떡살문 도구를 옹기 작업과정에 쓰인 토레미판 (덧살 새롭게 만든 용어)위에 각도를 다르게 하여 압인한다. 두 번째 물레로 원통을 만들어 외벽에 이중으로 덧살을 붙인 후 빠르게 회전하여 손으로 안에서 밖으로 밀어서 확장시킨다. 세 번째 압인 된 정적인 떡살 문양들을 빠른 속도에 의해 상하-좌우 해체 된 다양한 기하학적 문양을 실험하고 이렇게 개발 된 다양한 떡살 문양들을 단지 형태에 활용하여 부가가치가 높은 장식용 화병을 개발하는 것이 목적이다.

공공도서관의 성과지표 개발에 관한 연구 (A Study on Development of Performance Indicators for Korean Public Libraries)

  • 김규환;남영준
    • 한국문헌정보학회지
    • /
    • 제42권4호
    • /
    • pp.113-139
    • /
    • 2008
  • 오늘날과 같이 급변하는 환경에서 공공도서관은 다양한 변화에 대응하기 위해서 통합적 관점에서 성과를 측정할 필요가 있다. 그러나 대부분의 성과평가연구는 특정 영역과 특정 분석방법에 치중하고 있는 한계가 있다. 이에 도서관의 활동 영역(투입, 과정, 산출, 결과)을 평가할 수 있는 다면적인 성과지표의 개발이 필요하다. 현재 국제표준화기구와 IFLA는 BSC(균형성과지표)에 기초한 통합성과평가체제의 도입을 시도하고 있다. 이에 본 연구는 선행연구를 통해 도서관의 성과평가영역(투입, 과정, 산출, 결과)과 성과지표(투입지표, 산출지표, 결과지표)의 유형을 도출하고 국내 외 공공도서관 평가사례를 대상으로 평가영역과 성과지표의 유형을 비교 분석하였다. 비교 분석결과에 따라 국내 외 평가사례에 기초한 공공도서관의 통합적 성과지표를 제안하였다. 구체적으로 국제표준화기구 평가사례로부터 4개의 평가관점과 인력자원, 이용, 장서, 시설 등의 세부적 평가영역을 선정하였고 평가영역별 성과지표와 성과측정방법을 제안하였다. 마지막으로 제안된 평가영역과 성과지표에 대한 적합성 검증 방법을 제안하였다.

세라믹 정밀여과 및 활성탄 흡착 혼성공정에 의한 고탁도 원수의 고도정수처리: 입상 활성탄 충전율에 의한 영향 (Advanced Water Treatment of High Turbidity Source by Hybrid Process of Ceramic Microfiltration and Activated Carbon Adsorption: Effect of GAC Packing Fraction)

  • 박진용;이혁찬
    • 멤브레인
    • /
    • 제18권3호
    • /
    • pp.191-197
    • /
    • 2008
  • 본 연구에서는 고도정수처리를 위하여 모듈 내부와 세라믹 정밀여과막 외부 사이의 공간에 입상 활성탄(GAC)을 충전한 혼성 모듈을 이용하였으며, 정수 원수 중의 자연산 유기물(NOM)과 미세 무기 입자를 대체하기 위해, 휴믹산(humic acid)과 카올린(kaolin) 모사용액을 사용하였다. GAC의 충전율(packing fraction)에 따른 처리효율의 변화를 알아보고자. GAC의 충전율을 $0{\sim}24.05%$로 변화 시켰다. 그 결과, 3시간 운전하는 동안 막오염에 의한 저항($R_f$) 및 투과선속(J)의 변화 곡선은 GAC의 충전율에 관계없이 거의 중첩되었다. 그리고 탁도의 처리효율은 모든 조건에서 99.46% 이상으로 높았으며, $UV_{254}$ 흡광도로 측정한 NOM의 처리효율은 최대 충전율 24.05%에서 제거율은 99.43%로 가장 높게 나타났다. 한편, 충전율 24.05%에서 13시간 동안 운전한 결과, J는 막오염의 증가에 따라 운전 초기 1시간 이내에 급격히 감소하였으며 3시간 운전 후부터는 거의 일정한 투과선속을 나타냈다. 그리고 탁도 및 NOM의 처리효율은 각각 99.52%와 96.63%로 안정적인 높은 처리효율을 보였다.

통일신라시대(統一新羅時代) 불교건축(佛敎建築)의 변화(變化) (The Change in the Buddhist Architecture of the Unified Silla Period (668-935))

  • 김성우
    • 건축역사연구
    • /
    • 제1권2호
    • /
    • pp.68-84
    • /
    • 1992
  • The development of Buddhist architectures of the Unified Silla period have been generally understood to have paired pagoda instead of one which had been popular until before the unification. Besides the stylistic categorization of paired pagoda system, there had been no further investigation reported concerning whether there was any detailed process of change within the development of paired pagoda style. This paper aims to identify such change inside the development of paired pagoda style, which, externally, seems to be the same pattern of site design maintained throughout the period of Unified Silla that lasted for about three centuries. Since the temple sites of study are in the same pattern of layout, the method of investigation has to be such that can identify the subtle changes that, in external appearance, are not easily discernible. Hence, this research compared the dimensions of important measurement of five temple sites to be able to clarify the process of minor changes. Among many sites of Silla temples, only five were suitable for the research since detailed measurement were possible through field research or the report of excavation. They are the sites of Sachonwang-sa, Mangduk-sa, site of Kunsuri, and Bulguk-sa. Although the five sites have the same style of paired pagoda, it is clear that there were consistant flow of change. Even though the motivation of such change were not strong enough to change the site pattern itself, it resulted continuous minor changes such as the size and location of architectures. The size of image hall, for example, was growing larger and larger as time goes on, while, the size of Pagoda was getting smaller. In the same way, the size of middle gate became smaller while the size of lecture hall became larger, although the rate of change in these cases were not as severe as that of image hall and pagoda. At the same time, pagoda was coming closer to the middle gate leaving larger space in front of the image hall. Such aspect is even more meaningful considering the fact that the pagoda, from the 8th century in Japan and China, moved outside of the major precinct. The image hall, too, moved toward the middle gate slightly so that the space in front of the lecture hall became more spacious. Such changes, of course, were not accidental but they are the same continuous motivation of change that caused the changes before the period of unification. Enlargement of image hall and reduction of pagoda, for example, represent the changing relative importance of religious meaning. Hence, it is evident that one can not easily imterprete the development of one style only by categorizing it to be one same style. In the veiwpoint of the underlying motivation of change, the fact that one style persisted for a certain period of time, does not mean there had been no change, but means that it was the time of motivational accumulation, causing minor changes within the same style, to be able to create major change coming after.

  • PDF

HMR 무인매장 서비스 품질 분류에 관한 연구 (Classification of Service Quality for HMR unmanned store business)

  • 이종원
    • 서비스연구
    • /
    • 제13권2호
    • /
    • pp.41-61
    • /
    • 2023
  • 제4차 산업혁명 시대의 보편적 삶의 형태는 비대면이라는 키워드로 요약될 수 있을 것이다. 특히 소비 활동 측면에서도 점차 대면 접촉이 최소화되는 시스템으로 변화하고 있으며, 오프라인 매장에서는 키오스크(kiosk)와 로봇 등을 통한 비접촉 서비스로의 전환이 빠르게 이어지고 있다. 사회 구조 역시 시간의 흐름에 따라 변화되고 있으며 특히 1인 가구 증가와 고령화는 식생활과 연관된 외식산업의 변화에도 영향을 미치고 있다. 가정 내에서 직접 조리하는 노동이 줄어들고, 대체할 수 있는 식품의 이용이 증가하고 있음에 따라 가정간편식 (HMR: Home Meal Replacement)시장이 큰 규모로 성장하였다. 시장의 규모가 커지며 상품을 제공하는 비즈니스의 형태도 다양해졌다. 기술의 발전, 비대면 문화 그리고 기업의 경영 효율성이 맞물리며 최근 무인매장이 확산되고 있는 추세이다. 본 연구에서는 차츰 경쟁이 심화되는 HMR 무인매장의 서비스 품질 속성을 분류하여 고객만족을 기반으로 한 서비스 경영 관리 측면의 시사점을 제공하고자 Kano model을 활용한 서비스 품질 분류 및 Timko의 고객만족계수를 산출하였다. 분석결과 '상품(메뉴) 다양성' 등이 매력적 품질로 분류되었으며, '매장 내부/외부 청결성' 등이 일원적 품질로 분류되었다. 또한 '셀프 계산 과정의 편리성'은 당연적 품질, '매장 내 통행의 편리성' 무관심 품질로 분류되었다. 나아가 만족계수가 가장 높은 요소는 '상품(메뉴)다양성'으로, 불만족계수가 가장 높은 요소는 '셀프 계산과정의 편리성'으로 나타났다. 본 연구의 결과를 통해 HMR 무인매장의 서비스 품질 관리에 있어 우선순위를 도출하고, 이를 통해 관련 비즈니스에서의 전략적 시사점을 제공하고자 한다.

광 삼각법 측정 알고리즘을 이용한 자동차 도어 간격 측정 및 보정에 관한 연구 (A study on measurement and compensation of automobile door gap using optical triangulation algorithm)

  • 강동성;이정우;고강호;김태민;박규백;박정래;김지훈;최두선;임동욱
    • Design & Manufacturing
    • /
    • 제14권1호
    • /
    • pp.8-14
    • /
    • 2020
  • In general, auto parts production assembly line is assembled and produced by automatic mounting by an automated robot. In such a production site, quality problems such as misalignment of parts (doors, trunks, roofs, etc.) to be assembled with the vehicle body or collision between assembly robots and components are often caused. In order to solve such a problem, the quality of parts is manually inspected by using mechanical jig devices outside the automated production line. Automotive inspection technology is the most commonly used field of vision, which includes surface inspection such as mounting hole spacing and defect detection, body panel dents and bends. It is used for guiding, providing location information to the robot controller to adjust the robot's path to improve process productivity and manufacturing flexibility. The most difficult weighing and measuring technology is to calibrate the surface analysis and position and characteristics between parts by storing images of the part to be measured that enters the camera's field of view mounted on the side or top of the part. The problem of the machine vision device applied to the automobile production line is that the lighting conditions inside the factory are severely changed due to various weather changes such as morning-evening, rainy days and sunny days through the exterior window of the assembly production plant. In addition, since the material of the vehicle body parts is a steel sheet, the reflection of light is very severe, which causes a problem in that the quality of the captured image is greatly changed even with a small light change. In this study, the distance between the car body and the door part and the door are acquired by the measuring device combining the laser slit light source and the LED pattern light source. The result is transferred to the joint robot for assembling parts at the optimum position between parts, and the assembly is done at the optimal position by changing the angle and step.