• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.2
• /
• pp.138-143
• /
• 2017

The purpose of this paper is to implement a smart touch image output system based on ICT. The image output system here uses a pen-touch type screen coordinate recognition type to minimize the error because there is a difference in the resolution of the motion pattern between the image screen and the actual image using the image sensing reaction sensor. To do so, we built a smart image output system that can output image data by using ICT based technology and can be operated remotely without a PC, laptop, monitor, keyboard and mouse by using wireless method and smart touch function instead of the existing wired method. The result of this study is that the image can be output only if there is a wall, and the pen can be operated on the output image without the screen.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.253-257
• /
• 2020

The local information processing devices are devices that process information by converting voltage, current, and digital electric signals from legacy-type power facility into IEC 61850 based data. It acquires and processes the operation information of legacy-type power facility, performs control of power facility, and interlock function using internal logic. In particular, the time to convert data to process input and output information for a device is important because a number of protection relay input and output signals are handled by only one device. This paper introduces test methods and cases for measuring IEC 61850 communication function and input/output data conversion time of local information processing device.

• Information and Communications Magazine
• /
• v.24 no.5
• /
• pp.107-123
• /
• 2007

Multiple antenna technologies have received high attention in the last few decades for their capabilities to improve the overall system performance. Multiple-input multiple-output systems include a variety of techniques capable of not only increase the reliability of the communication but also impressively boost the channel capacity. In addition, smart antenna systems can increase the link quality and lead to appreciable interference reduction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3A
• /
• pp.119-128
• /
• 2003

A space diversity technique was applied to the conventional optimal beamforming structure using antenna arrays at the base station receiver in the wireless mobile communication system to get performance enhancement due to interference rejection and fading resistance ability of it. To demonstrate the benefit of proposed system, we derived output signal to interference plus noise ratio (SINR) of combined signal from all sub-array groups considering the fading effects and compared with the beamforming-only system. From the analysis and simulation results, we showed that the proposed system can provide high performance gain under Rayleigh fading channel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2071-2078
• /
• 2009

The first frame is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the intial QP (Quantization Parameter) for the first frame affects the first frame as well as the following frames. Traditionally, the initial QP is determined among four constant values only depending on the bpp. In the case of low bit rate video coding, the initial QP value is fixed to 35 regardless of the output bandwidth. Although this initialization scheme is simple, yet it is not accurate enough. An accurate intial QP prediction scheme should not only depends on bpp but also on the complexity of the video sequence and the output bandwidth. In the proposed scheme, we use a linear model because there is a linear inverse proportional relationship between the output bandwidth and the optimal intial QP. Model parameters of the model are determined depending on the spatial complexity of the first frame. It is shown by experimental results that the new algorithm can predict the optimal initial QP more accurately and generate the PSNR performance better than that of the existing JM algorithm.

• The Journal of Society for e-Business Studies
• /
• v.2 no.2
• /
• pp.89-113
• /
• 1997

Modeling methodology has been widely used for analysis and design of a information system. Specially, under the CALS environments, modeling approach is more important because the enterprise functions are inter-related and information sharing speeds up the business. In this paper, we suggest functional requirements about modeling methodology for CALS by surveying the IDEF0 and ARIS. The former is FIPS 183 and the latter is basic methodology of SAP/R3 which is world-wide ERP system. The proposed functional requirements include all semantics of IDEF0 and adds some features. The first is adding modeling components which are semantic representations. In addition to ICOMs, we add the time and cost component which is required to execute the function. The second is tracing mechanism. When we need some information, we drive the functions related with the information by reverse tracing of the function which produces the information as a output and input. Through the tracing, we find out the bottleneck process or high cost process. This approach guarantees the integrity of data by designating the data ownership. Finally, we suggest the final decomposition level. We call the final decomposed function into unit function which has only one output data. We can combine and reconstruct some of functions such as 'lego block' combination.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.3
• /
• pp.794-815
• /
• 2023

The rapid development of mobile communication not only has made the industry gradually diversified, but also has enhanced the service quality requirements of users. In this regard, it is imperative to consider jointly network slicing and mobile edge computing. The former mainly ensures the requirements of varied vertical services preferably, and the latter solves the conflict between the user's own energy and harsh latency. At present, the integration of the two faces many challenges and need to carry out at different levels. The main target of the paper is to minimize the energy consumption of the system, and introduce a multi-slice joint task offloading and resource allocation scheme for massive multiple input multiple output enabled heterogeneous networks. The problem is formulated by collaborative optimizing offloading ratios, user association, transmission power and resource slicing, while being limited by the dissimilar latency and rate of multi-slice. To solve it, assign the optimal problem to two sub-problems of offloading decision and resource allocation, then solve them separately by exploiting the alternative optimization technique and Karush-Kuhn-Tucker conditions. Finally, a novel slices task offloading and resource allocation algorithm is proposed to get the offloading and resource allocation strategies. Numerous simulation results manifest that the proposed scheme has certain feasibility and effectiveness, and its performance is better than the other baseline scheme.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.101-108
• /
• 2001

In the previous study, an improved QRD (QR Decomposition)-ILS(Iterative Least-Squares) method is proposed to estimate the structural parameters at the element level using response data alone without using any information of excitation measurements for the assessment of local damages and deterioration in complex and large structural systems. But for a complex and large structural system, where response measurement at every dynamic degree of freedom(DDOF) is not possible, the absence of some observation points of responses and its effect on the proposed SI method must be studied In the paper, a QRD-ILS technique that utilizes the known intact stiffness information estimated based on the visual inspection, field measurements and/or NDT tests is proposed to identify local damages of fracture critical members using measured responses only at limited DDOFs. A numerical example is used to illustrate the application of this technique. The results indicate that the proposed SI technique is very simple but efficient, since no input information are required with only limited observations.

• Journal of Communications and Networks
• /
• v.8 no.3
• /
• pp.290-296
• /
• 2006

In this paper, a generalized blind adaptive algorithm is introduced for multi-user detection of direct sequence code division multiple access (OS-COMA) wireless communication systems. The main property of the proposed algorithm is its ability to resolve the multipath fading channel resulting in inter symbol interference (ISI) as well as multiple access interference (MAI). Other remarkable properties are its low complexity and mitigation to the near-far problem as well as its insensitivity to asynchronous transmission. The proposed system is based on the minimization of the output energy and convergence to the minimum mean square error (MMSE) detector. It is blind in the sense that it needs no knowledge of the other users' signatures, only the intended user signature and timing are required. Furthermore, the convergence of the minimum output energy (MOE) detector to the MMSE detector is analytically proven in case of M-ary PSK. Depicted results show that the performance of the generalized system dominates those previously considered. Further improvements are obtained when multiple input multiple output (MIMO) technique is employed.

• Smart Structures and Systems
• /
• v.24 no.5
• /
• pp.617-630
• /
• 2019

Currently most of the vision-based structural identification research focus either on structural input (vehicle location) estimation or on structural output (structural displacement and strain responses) estimation. The structural condition assessment at global level just with the vision-based structural output cannot give a normalized response irrespective of the type and/or load configurations of the vehicles. Combining the vision-based structural input and the structural output from non-contact sensors overcomes the disadvantage given above, while reducing cost, time, labor force including cable wiring work. In conventional traffic monitoring, sometimes traffic closure is essential for bridge structures, which may cause other severe problems such as traffic jams and accidents. In this study, a completely non-contact structural identification system is proposed, and the system mainly targets the identification of bridge unit influence line (UIL) under operational traffic. Both the structural input (vehicle location information) and output (displacement responses) are obtained by only using cameras and computer vision techniques. Multiple cameras are synchronized by audio signal pattern recognition. The proposed system is verified with a laboratory experiment on a scaled bridge model under a small moving truck load and a field application on a footbridge on campus under a moving golf cart load. The UILs are successfully identified in both bridge cases. The pedestrian loads are also estimated with the extracted UIL and the predicted weights of pedestrians are observed to be in acceptable ranges.