• Journal of the Korean Institute of Telematics and Electronics
• /
• v.6 no.4
• /
• pp.1-7
• /
• 1969

A Series Inverter circuit is analyzed and Fourier analysis is applied to its output waveform. It is proved that under the optimum condition the Output is nearly sinusoidal wave which contains only odd harmonic Components and the relative amplitude of the hramonic components are expressed with very simple formula which contain only "Q" of the circuit as a parameter.parameter.

• Structural Engineering and Mechanics
• /
• v.17 no.3_4
• /
• pp.445-466
• /
• 2004

In this paper, several modal identification techniques for output-only structural systems are extensively investigated. The methods considered are the power spectral method, the frequency domain decomposition method, the Ibrahim time domain method, the eigensystem realization algorithm, and the stochastic subspace identification method. Generally, the power spectral method is most widely used in practical area, however, the other methods may give better estimates particularly for the cases with closed modes and/or with large measurement noise. Example analyses were carried out on typical structural systems under three different loading cases, and the identification performances were examined throught the comparisons between the estimates by various methods.

• Journal of Information Technology Applications and Management
• /
• v.21 no.4_spc
• /
• pp.381-401
• /
• 2014

This study proposes the accurate economic effect (employment inducement coefficient, hiring inducement coefficient, index of the sensitivity of dispersion, index of the power of dispersion, and ratio of value added) of Korea software industry by analyzing the inter-industry relation using the modified inter-industry table. Some previous studies related to the inter-industry analysis were reviewed and the key problems were identified. First, in the current inter-industry table publishedby the Bank of Korea, the output of software industry includes not only the output of pure software industry (package software and IT services) but also the output of non-software industry due to the misclassification of the industry. This causes the output to become bigger than the actual output of the software industry. Second, during rewriting the inter-industry table, the output is changing. The inter-industry table is the table in the form of rows and columns, which records the transactions of goods and services among industries which are required to continue the activities of each industry. Accordingly, if only an output of a specific industry is changed, the reliability of the table would be degraded because the table is prepared based on the relations with other industries. This possibly causes the economic effect coefficient to degrade reliability, over or under estimated. This study tries to correct these problems to get the more accurate economic effect of the software industry. First, to get the output of the pure software section only, the data from the Korea Electronics Association(KEA) was used in the inter-industry table. Second, to prevent the difference in the outputs during rewriting the inter-industry table, the difference between the output in the current inter-industry table and the output from KEA data was identified and then it was defined as the non-software section output for the analysis. The following results were obtained: The pure software section's economic effect coefficient was lower than the coefficient of non-software section. It comes from differenceof data to Bank of Korea and KEA. This study hasa signification from accurate economic effect of Korea software industry.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.2
• /
• pp.134-141
• /
• 1998

Sometimes we need to acquire symbolic quantity of information instead of physical quantity for the output of any system. For instance we can not control traffic signal accurately through only the number of vehicles. At that case we can produce better output using symbolic quantity of road length and width and vehicle type. But it is very difficult to aggregate symbolic information from the unrelated and mutually conflicted input after calculating linear and related expression. Moreover that will take much time to produce symbolic output by the physical quantity only. In this paper we implemented the ultimate traffic control information by using fuzzy sensor algorithm and compared our results with the conventional traffic controller after studying the necessity of symbolic information in the traffic control.

• Structural Engineering and Mechanics
• /
• v.22 no.1
• /
• pp.53-70
• /
• 2006

The paper summarizes the dynamic-based assessment of a reinforced concrete arch bridge, dating back to the 50's. The outlined approach is based on ambient vibration testing, output-only modal identification and updating of the uncertain structural parameters of a finite element model. The Peak Picking and the Enhanced Frequency Domain Decomposition techniques were used to extract the modal parameters from ambient vibration data and a very good agreement in both identified frequencies and mode shapes has been found between the two techniques. In the theoretical study, vibration modes were determined using a 3D Finite Element model of the bridge and the information obtained from the field tests combined with a classic system identification technique provided a linear elastic updated model, accurately fitting the modal parameters of the bridge in its present condition. Hence, the use of output-only modal identification techniques and updating procedures provided a model that could be used to evaluate the overall safety of the tested bridge under the service loads.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.395-398
• /
• 2004

High-linearity voltage-controlled current sources (VCCSs) circuits for wide voltage-controlled oscillator and automatic gun control were proposed. The VCCS consists of emitter follower for voltage input, two common-base amplifier which their emitter connected for current output, and current mirror which connected the two amplifier for large output current. The VCCS used only five transistors and a resistor without an extra bias circuit. Simulation results show that the VCCS has current output range from 0mA to 300mA over the control voltage range from 1V to 4.8V at supply voltage 5V. The linearity error of output current has less than $1.4\%$ over the current range from 0A to 300mA.

• Proceedings of the CALSEC Conference
• /
• 1997.11a
• /
• pp.263-268
• /
• 1997

Functional Modeling methodology, IDEF0 is widely used for modeling, analysis and description of enterprise system. The limitation of modeling components restricts applicability and give rise to confusion about model. In this paper, we propose new method to extend IDEF0. The first is adding modeling components which are semantic representations. In addition to ICOMs, we add the time and cost component which is required to execute the function. The second is tracing mechanism. When we need some information, we drive the functions related with the information by reverse tracing of the function which produces the information as a output and input. Through the tracing, we find out the bottleneck process or high cost process. Finally, we suggest the final decomposition level. We call the final decomposed function into unit function which has only one output data. We can combine and reconstruct some of functions because an unit function is similar to ‘lego block’. To reach the integrated system, the main problem to be solved is the integration of information produced by different functional subsystem. This can be resolved when the creation of data must be dependent on only one function. Through view integration of function output, we can guarantee the integrity of data.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.459-466
• /
• 1999

I broadband ISDN every packet will show different result if it would be processed according to its usage by the server. That is, normal data won't show big differences if they would be processed at normal speed. But it will improve the quality of service to process some kinds of data - for example real time video or voice type data or some data for a bid to by something through the internet - more fast than the normal type data. solution for this problem was suggested - priority packets. But the analyses of them are under way. Son in this paper a switching system for an output queuing model in a single server was assumed and some packets were given priorities and analysed. And correlation, simulating real life situation, was given too. These packets were analysed through three cases, first packets having no correlation, second packets having only correlation and finally packets having priority three cases, first packets having no correlation, second packets having only correlation and finally packets having priority and correlation. The result showed that correlation doesn't affect the mean delay time and the high priority packets have improved mean delay time regardless of the arrival rate. Those packets were assumed to be fixed-sized like ATM fixed-sized cell and the contention strategy was assumed to be short bus contention method for the output queue, and the mean delay length and the maximum 버퍼 length not to lose any packets were analysed.

• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.3
• /
• pp.257-264
• /
• 2005

This paper suggests a heuristic algorithm for the clustering problem. Clustering involves grouping similar objects into a cluster. Clustering is used in a wide variety of fields including data mining, marketing, and biology. Until now there are a lot of approaches using Self-Organizing Feature Maps(SOFMs). But they have problems with a small output-layer nodes and initial weight. For example, one of them is a one-dimension map of k output-layer nodes, if they want to make k clusters. This approach has problems to classify elaboratively. This paper suggests one-dimensional output-layer nodes in SOFMs. The number of output-layer nodes is more than those of clusters intended to find and the order of output-layer nodes is ascending in the sum of the output-layer node's weight. We can find input data in SOFMs output node and classify input data in output nodes using Euclidean distance. We use the well known IRIS data as an experimental data. Unsupervised clustering of IRIS data typically results in 15 - 17 clustering error. However, the proposed algorithm has only six clustering errors.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2001.05a
• /
• pp.145-151
• /
• 2001

An extension of interaction matrix formulation to the problem of system and disturbance identification for a plant that is corrupter by both process and output disturbances is presented. With only an assumed upper bound on the order of the system and an assumed upper bound on the number of disturbance frequencies, it is shown that both the disturbance-free model and disturbance effect can be recovered exactly from disturbance-corrupted input-output data without direct measurement of the periodic disturbances. The rich information returned by the identification can be used by a performance-oriented model-based loaming or repetitive control system to eliminate unwanted periodic disturbances.