• 제목/요약/키워드: output rate

검색결과 2,335건 처리시간 0.03초

Current Estimator를 이용한 멀티레이트 제어기 설계 (Design of Multirate Controller using a Current Estimator)

  • 황희철;정정주
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.190-190
    • /
    • 2000
  • This paper presents a multirate state feedback control (MRSFC) method for systems sensitive to disturbance and noise based on the multirate estimator design using the current estimator. MRSFC updates the controller output slower than the measurement sampling frequency of system output by a lifting factor R=T$\sub$c//T$\sub$s/. The closed-loop MRSFC system is less sensitive to disturbance and noise due to filtering effect than the conventional single-rate control system. The multirate estimator gain is obtained from solving a conventional pole placement problem such that MRSFC has the same spectrum of eigenvalues in the s-plane as the single-rate control. We applied the proposed multirate state feedback controller to a galvanometer servo system. Simulation and experimental results show that settling and tracking performances are improved compared with a conventional single-rate pole placement control (PPC).

  • PDF

Enhanced RBF Network by Using Auto- Turning Method of Learning Rate, Momentum and ART2

  • Kim, Kwang-baek;Moon, Jung-wook
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2003년도 Proceeding
    • /
    • pp.84-87
    • /
    • 2003
  • This paper proposes the enhanced REF network, which arbitrates learning rate and momentum dynamically by using the fuzzy system, to arbitrate the connected weight effectively between the middle layer of REF network and the output layer of REF network. ART2 is applied to as the learning structure between the input layer and the middle layer and the proposed auto-turning method of arbitrating the learning rate as the method of arbitrating the connected weight between the middle layer and the output layer. The enhancement of proposed method in terms of learning speed and convergence is verified as a result of comparing it with the conventional delta-bar-delta algorithm and the REF network on the basis of the ART2 to evaluate the efficiency of learning of the proposed method.

  • PDF

수조에서 전송 다이버시티를 사용한 수중음향통신의 성능 고찰 (Performance Evaluation of Underwater Acoustic Communication using Transmit Diversity in Water Tank)

  • 박찬섭;김기만
    • 한국항해항만학회지
    • /
    • 제37권3호
    • /
    • pp.269-273
    • /
    • 2013
  • 수중음향 채널은 일반적으로 다중경로 전달과 분산 등으로 인해 통신하기에 어려운 매질 가운데 하나로 인식된다. MIMO (Multiple-input multiple-output) 기술은 대역이 제한된 수중음향 채널에서 데이터 전송율을 증가시키기 위해 최근 활발히 연구되고 있다. 이 경우 전송 다이버시티 기술을 적용할 수 있는데 대표적인 것이 Alamouti 구조이다. 이 논문에서는 실험을 통하여 전송 다이버시티 기술의 성능을 고찰하였다. 실험에는 2개의 송신기와 2개의 수신기가 사용되었으며, 실내의 음향수조에서 수행되었다. 실험 결과 5~8%의 오차율을 확인하였는데 이는 같은 전송율을 기준으로 SISO(Single-input single-output) 채널에서의 오차율 14.8% 보다 향상된 결과를 나타내었다.

LCD 드라이버에 적용 가능한 저소비전력 및 높은 슬루율을 갖는 이중 레일 투 레일 버퍼 증폭기 (A Low-Power High Slew-Rate Rail to Rail Dual Buffer Amplifier for LCD output Driver)

  • 이민우;강병준;김한슬;한정우;손상희;정원섭
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2013년도 추계학술대회
    • /
    • pp.726-729
    • /
    • 2013
  • 본 논문에서는 LCD source driver IC의 output buffer op-amp로 사용가능한 저소비전력 및 높은 슬루율을 갖는 CMOS rail-to rail 입/출력 op-amp를 설계하였다. 제안한 op-amp는 기존의 출력단 Class-AB 단에 새로이 설계한 Class-B control단을 추가하여 저소비전력과 높은 슬루율을 갖게 하였다. 시뮬레이션 결과 제안된 op-amp는 소비전력이 1.19mW로 감소하였으며 사용한 부하커패시터 (10nF)를 기준으로 슬루율은 6.5V/us로 확인되었다.

  • PDF

최적의 퍼지제어규칙을 얻기위한 퍼지학습법 (A Learning Algorithm for Optimal Fuzzy Control Rules)

  • 정병묵
    • 대한기계학회논문집A
    • /
    • 제20권2호
    • /
    • pp.399-407
    • /
    • 1996
  • A fuzzy learning algorithm to get the optimal fuzzy rules is presented in this paper. The algorithm introduces a reference model to generate a desired output and a performance index funtion instead of the performance index table. The performance index funtion is a cost function based on the error and error-rate between the reference and plant output. The cost function is minimized by a gradient method and the control input is also updated. In this case, the control rules which generate the desired response can be obtained by changing the portion of the error-rate in the cost funtion. In SISO(Single-Input Single- Output)plant, only by the learning delay, it is possible to experss the plant model and to get the desired control rules. In the long run, this algorithm gives us the good control rules with a minimal amount of prior informaiton about the environment.

Performance Improvement Using Iterative Two-Dimensional Soft Output Viterbi Algorithm Associated with Noise Filter for Holographic Data Storage Systems

  • 누엔딘지;이재진
    • 한국통신학회논문지
    • /
    • 제39A권3호
    • /
    • pp.121-126
    • /
    • 2014
  • Demand of the data storage becomes more and more growing. This requests the next generation of storage devices to have the dominated storage capability associated with superfast read/write rate. Holographic data storage (HDS) is investigated for a long time and is considered to be a candidate for the future storage system. However, it has two-dimensional intersymbol interference that conventional one-dimensional detection solutions have not yet handled strictly because of the complexity level of system as well as the cost. We propose a new scheme that combines iterative soft output Viterbi algorithm with noise filter for improving the bit error rate performance of HDS.

A Fast Context Modeling Using Tree-structure of Coefficients from Wavelet-domain

  • Choi, Hyun-Jun;Seo, Young-Ho;Kim, Dong-Wook
    • Journal of information and communication convergence engineering
    • /
    • 제7권4호
    • /
    • pp.496-500
    • /
    • 2009
  • In EBCOT, the context modeling process takes excessive calculation time and this paper proposed a method to reduce this calculation time. That is, if the finest resolution coefficient is less than a pre-defined transfer factor the coefficient and its descendents skip the context modeling process. There is a trade-off relationship between the calculation time and the image quality or the amount of output data such that as this threshold value increases, the calculation time and the amount of output data decreases, but the image degradation increases. The experimental results showed that in this range the resulting reduction rate in calculation time was from 3% to 64% in average, the reduction rate in output data was from 32% to 73% in average.

고속응답 마이크로 유량센서의 제작 (Fabrication of Micro-Flow Sensors with High-response Time)

  • 정귀상;홍석우
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 영호남학술대회 논문집
    • /
    • pp.17-20
    • /
    • 2000
  • This paper describes on the fabrication and characteristics of hot-film type micro-flowsensors integrated with Pt-RTD's and micro-heaters on the Si substrate, in which MgO thin-films were used as medium layer in order to improve adhesion of Pt thin-films to $SiO_2$ layer, The MgO layer improved adhesion of Pt thin-films to $SiO_2$ layer without any chemical reactions to Pt thin-films under high annealing temperatures. In investigating output characteristics of the fabricated micro-flowsensors, the output voltages increased as gas flow rate and its conductivity increased due to increase of heat-loss from sensor to external. Output voltage was 82 mV at $N_2$ flow rate of 2000 seem/min, heating power of 1.2W.

  • PDF

하수처리장 방류수를 이용한 소수력발전 성능분석 (Performance Anaysis of Small Hydropower Plant Using Treated Effluent in Wastewater Treatment Plant)

  • 이철형;박완순
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
    • /
    • pp.494-497
    • /
    • 2012
  • A methodology to predict the output performance of small hydro power using treated effluent in wastewater treatment plant has been studied. Existing plant located Kyunggi-Do were selected and the output performance characteristics for these plants were analyzed. As a result, it was found that the developed model in this study can be used to analyze the output characteristics for small hydro power in wastewater treatment plant. Additionally, primary design specifications such as design flowrate, capacity, operational rate and annual electricity production were estimated and discussed.

  • PDF

RF 전자기장 생체 영향 실험에서 통계적 방법을 통한 전자기장 노출 불확실성 분석 (The analysis of RF dosimetric uncertainties by using statistical method at in-vivo and in-vitro experiments)

  • 최성호;김남
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.74-78
    • /
    • 2003
  • This paper shows the dosimetric uncertainties of electromagnetic field at in-vivo and in-vitro experiments. For more accurate consequences of these researches, we have tried to find out any correlations among output power, power density and specific absorption rate(SAR) with the results of in-vivo, in-vitro tests and SAR reports of cellular phone and PDA. In the case of in-vivo tests, the power density has close statistical correlations with SAR value and in the event of in-vitro tests, the output power has considerable statistical correlations with SAR containing duty factor. On the other hand, we found that both power density and output power don't have any close correlations with SAR. And, we obtained fitted regression form among frequency, power density and SAR containing duty factor through multiple linear regression analysis.

  • PDF